Home Energiemanagement Gate-Treiber Halbbrückentreiber
Home
Energiemanagement
Gate-Treiber
Halbbrückentreiber

TPS28225-Q1

AKTIV

Halbbrücken-Gate-Treiber für die Automobil-Elektronik, 4 A, 27 V mit 4 V UVLO für synchrone Gleichri

Jetzt bestellen
Datenblatt

TPS28225-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Bootstrap supply voltage (max) (V) 33 Power switch MOSFET Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 8 Peak output current (A) 4 Operating temperature range (°C) -40 to 105 Undervoltage lockout (typ) (V) 3.5 Rating Automotive Propagation delay time (µs) 0.014 Rise time (ns) 10 Fall time (ns) 5 Iq (mA) 0.35 Switch node voltage (V) 0 Features (x1) PWM, Synchronous Rectification Driver configuration Single
Bootstrap supply voltage (max) (V) 33 Power switch MOSFET Input supply voltage (min) (V) 4.5 Input supply voltage (max) (V) 8 Peak output current (A) 4 Operating temperature range (°C) -40 to 105 Undervoltage lockout (typ) (V) 3.5 Rating Automotive Propagation delay time (µs) 0.014 Rise time (ns) 10 Fall time (ns) 5 Iq (mA) 0.35 Switch node voltage (V) 0 Features (x1) PWM, Synchronous Rectification Driver configuration Single
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) VSON (DRB) 8 9 mm² (3 mm × 3 mm)
  • Qualified for automotive applications
  • Drives two N-channel MOSFETs with 14-ns adaptive dead time
  • Wide gate drive voltage: 4.5 V up to 8.8 V with best efficiency at 7 V to 8 V
  • Wide power system train input voltage: 3 V up to 27 V
  • Wide input PWM signals: 2-V up to 13.2-V amplitude
  • Capable of driving MOSFETs with ≥40-A current per phase
  • High frequency operation: 14-ns propagation delay and 10-ns rise or fall time allows FSW up to 2 MHz
  • Capable of propagating <30-ns input PWM pulses
  • Low-side driver sink on-resistance (0.4 Ω) prevents dV/dT related shoot-through current
  • Three-state PWM input for power stage shutdown
  • Space saving enable (input) and power good (output) signals on the same pin
  • Thermal shutdown
  • UVLO protection
  • Internal bootstrap diode
  • Economical SOIC-8 and thermally enhanced 3-mm × 3-mm VSON-8 packages
  • High performance replacement for popular three-state input drivers
  • Qualified for automotive applications
  • Drives two N-channel MOSFETs with 14-ns adaptive dead time
  • Wide gate drive voltage: 4.5 V up to 8.8 V with best efficiency at 7 V to 8 V
  • Wide power system train input voltage: 3 V up to 27 V
  • Wide input PWM signals: 2-V up to 13.2-V amplitude
  • Capable of driving MOSFETs with ≥40-A current per phase
  • High frequency operation: 14-ns propagation delay and 10-ns rise or fall time allows FSW up to 2 MHz
  • Capable of propagating <30-ns input PWM pulses
  • Low-side driver sink on-resistance (0.4 Ω) prevents dV/dT related shoot-through current
  • Three-state PWM input for power stage shutdown
  • Space saving enable (input) and power good (output) signals on the same pin
  • Thermal shutdown
  • UVLO protection
  • Internal bootstrap diode
  • Economical SOIC-8 and thermally enhanced 3-mm × 3-mm VSON-8 packages
  • High performance replacement for popular three-state input drivers

The TPS28225-Q1 is a high-speed driver for N-channel complementary driven power MOSFETs with adaptive dead-time control. This driver is optimized for use in variety of high-current, single and multi-phase DC-to-DC converters. The TPS28225-Q1 is highly efficient, has a small solution size and low-EMI emissions.

The TPS28225-Q1 device offers high performance features such as a 8.8-V gate drive voltage, 14-ns adaptive dead-time control, 14-ns propagation delays and high-current 2-A source and 4-A sink drive capabilities. The 0.4-Ω impedance for the lower gate driver holds the gate of power MOSFET below its threshold and ensures no shoot-through current at high dV/dt phase node transitions. The bootstrap capacitor is charged by an internal diode which allows the use of an N-channel MOSFETs in a half-bridge configuration.

The TPS28225-Q1 is offered in an economical SOIC-8 package and in a thermally enhanced small sized VSON package. The driver is specified to operate in the temperature range of –40°C to 105°C with the absolute maximum junction temperature of 150°C.

The TPS28225-Q1 is a high-speed driver for N-channel complementary driven power MOSFETs with adaptive dead-time control. This driver is optimized for use in variety of high-current, single and multi-phase DC-to-DC converters. The TPS28225-Q1 is highly efficient, has a small solution size and low-EMI emissions.

The TPS28225-Q1 device offers high performance features such as a 8.8-V gate drive voltage, 14-ns adaptive dead-time control, 14-ns propagation delays and high-current 2-A source and 4-A sink drive capabilities. The 0.4-Ω impedance for the lower gate driver holds the gate of power MOSFET below its threshold and ensures no shoot-through current at high dV/dt phase node transitions. The bootstrap capacitor is charged by an internal diode which allows the use of an N-channel MOSFETs in a half-bridge configuration.

The TPS28225-Q1 is offered in an economical SOIC-8 package and in a thermally enhanced small sized VSON package. The driver is specified to operate in the temperature range of –40°C to 105°C with the absolute maximum junction temperature of 150°C.
filter Andere Halbbrückentreiber suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
UCC27302A-Q1 AKTIV Halbbrückentreiber für die Automobilindustrie, 120 V, 4,5 A, mit 5 V UVLO, Verriegelung und Aktivier More recent device with higher drive strength, an integrated bootstrap diode, input interlock and faster switching capabilities in an industry standard pinout

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS28225-Q1 Automotive High-Frequency 4-A Sink Synchronous MOSFET Drivers datasheet (Rev. D) PDF | HTML 13.12.2021
Anwendungshinweis Using Half-Bridge Gate Driver to Achieve 100% Duty Cycle for High Side FET PDF | HTML 25.03.2024
Anwendungshinweis Bootstrap Circuitry Selection for Half Bridge Configurations (Rev. A) PDF | HTML 08.09.2023
Anwendungshinweis Comparative Analysis of Two Different Methods for Gate-Drive Current Boosting (Rev. A) PDF | HTML 17.02.2022
Application brief External Gate Resistor Selection Guide (Rev. A) 28.02.2020
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 28.02.2020
Weitere Dokumente Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) 29.10.2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

TPS28225 PSpice Transient Model

SLUM287.ZIP (36 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS28225 Unencrypted PSpice Transient Model

SLUM496.ZIP (3 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 8 Ultra Librarian
VSON (DRB) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos