Inicio Administración de potencia Controladores LED Controladores para LED de retroiluminación
Inicio
Administración de potencia
Controladores LED
Controladores para LED de retroiluminación

LM2756

ACTIVO

Controlador LED sin inductor con pantalla múltiple con 32 pasos de atenuación exponencial en microSM

Haga su pedido ahora
Hoja de datos

LM2756

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 8 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 6 Type Capacitive Switching frequency (max) (kHz) 1600 Duty cycle (max) (%) 100 LED current per channel (mA) 30 Peak efficiency (%) 92 Topology Boost, Current Sink Features I2C control Operating temperature range (°C) -30 to 85 Rating Catalog
Number of channels 8 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 6 Type Capacitive Switching frequency (max) (kHz) 1600 Duty cycle (max) (%) 100 LED current per channel (mA) 30 Peak efficiency (%) 92 Topology Boost, Current Sink Features I2C control Operating temperature range (°C) -30 to 85 Rating Catalog
DSBGA (YFQ) 20 3.96 mm² (— mm × — mm)
  • Drives up to 8 LEDs with up to 30mA of Diode Current Each
  • 32 Exponential Dimming Steps with 800:1 Dimming Ratio for Group A (Up to 6 LEDs)
  • 8 Linear Dimming States for Groups B (Up to 3 LEDs) and D1C (1 LED)
  • Programmable Auto-Dimming Function
  • 3 Independently Controlled LED Groups Via I2C Compatible Interface
  • Up to 90% Efficiency
  • Total Solution Size < 21mm2
  • Low Profile 20 Bump DSBGA Package (1.615mm × 2.015mm × 0.6mm)
  • 0.4% Accurate Current Matching
  • Internal Soft-Start Limits Inrush Current
  • True Shutdown Isolation for LED’s
  • Wide Input Voltage Range (2.7V to 5.5V)
  • Active High Hardware Enable

All trademarks are the property of their respective owners.

  • Drives up to 8 LEDs with up to 30mA of Diode Current Each
  • 32 Exponential Dimming Steps with 800:1 Dimming Ratio for Group A (Up to 6 LEDs)
  • 8 Linear Dimming States for Groups B (Up to 3 LEDs) and D1C (1 LED)
  • Programmable Auto-Dimming Function
  • 3 Independently Controlled LED Groups Via I2C Compatible Interface
  • Up to 90% Efficiency
  • Total Solution Size < 21mm2
  • Low Profile 20 Bump DSBGA Package (1.615mm × 2.015mm × 0.6mm)
  • 0.4% Accurate Current Matching
  • Internal Soft-Start Limits Inrush Current
  • True Shutdown Isolation for LED’s
  • Wide Input Voltage Range (2.7V to 5.5V)
  • Active High Hardware Enable

All trademarks are the property of their respective owners.

The LM2756 is a highly integrated, switched-capacitor, multi-display LED driver that can drive up to 8 LEDs in parallel with a total output current of 180mA. Regulated internal current sources deliver excellent current and brightness matching in all LEDs.

The LED driver current sinks are split into three independently controlled groups. The primary group (Group A) can be configured to drive four, five or six LEDs for use in the main phone display, while the secondary group (Group B) can be configured to drive one, two or three LEDs for driving secondary displays, keypads and/or indicator LEDs. An additional driver, D1C, is provided for additional indicator lighting functions.

The device provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or in Pass-Mode. The proper gain for maintaining current regulation is chosen, based on LED forward voltage, so that efficiency is maximized over the input voltage range.

The LM2756 is available in TI's tiny 20-bump, 0.4mm pitch, thin DSBGA package.

The LM2756 is a highly integrated, switched-capacitor, multi-display LED driver that can drive up to 8 LEDs in parallel with a total output current of 180mA. Regulated internal current sources deliver excellent current and brightness matching in all LEDs.

The LED driver current sinks are split into three independently controlled groups. The primary group (Group A) can be configured to drive four, five or six LEDs for use in the main phone display, while the secondary group (Group B) can be configured to drive one, two or three LEDs for driving secondary displays, keypads and/or indicator LEDs. An additional driver, D1C, is provided for additional indicator lighting functions.

The device provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or in Pass-Mode. The proper gain for maintaining current regulation is chosen, based on LED forward voltage, so that efficiency is maximized over the input voltage range.

The LM2756 is available in TI's tiny 20-bump, 0.4mm pitch, thin DSBGA package.
filter Buscar otro/a Controladores para LED de retroiluminación
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos Multi-Display Inductorless LED Driver w/32 Exponential Dimming Steps in DSBGA datasheet (Rev. C) 1/05/2013
Informe Common LED Functions and LED Driver Design Considerations 21/09/2020
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Nota sobre la aplicación Designing Energy-Efficient Handheld Illum Solutions (Rev. A) 30/04/2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFQ) 20 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos