REF2025
- Two outputs, VREF and VREF / 2, for convenient use in single-supply systems
- Excellent temperature drift performance:
- 8 ppm/°C (maximum) from –40°C to 125°C
- High initial accuracy: ±0.05% (maximum)
- VREF and VBIAS tracking
overtemperature:
- 6 ppm/°C (maximum) from –40°C to 85°C
- 7 ppm/°C (maximum) from –40°C to 125°C
- Microsize package: SOT23-5
- Low dropout voltage: 10 mV
- High output current: ±20 mA
- Low quiescent current: 360 µA
- Line regulation: 3 ppm/V
- Load regulation: 8 ppm/mA
- Matte-Sn version (REF2025AISDDCR) for improved corrosion resistance in the Battelle Class III and similar harsh environments
Applications with only a positive supply voltage often require additional stable voltage in the middle of the analog-to-digital converter (ADC) input range to bias input bipolar signals. The REF20xx provides a reference voltage (VREF) for the ADC and a second highly-accurate voltage (VBIAS) that can be used to bias the input bipolar signals.
The REF20xx offers excellent temperature drift (8 ppm/°C, maximum) and initial accuracy (0.05%) on both the VREF and VBIAS outputs while operating at a quiescent current less than 430 µA. In addition, the VREF and VBIAS outputs track each other with a precision of 6 ppm/°C (maximum) across the temperature range of –40°C to 125°C. All these features increase the precision of the signal chain and decrease board space, while reducing the cost of the system as compared to a discrete solution. Extremely low dropout voltage of only 10 mV allows operation from very low input voltages, which can be very useful in battery-operated systems.
Both the VREF and VBIAS voltages have the same excellent specifications and can sink and source current equally well. Very good long-term stability and low noise levels make these devices ideally-suited for high-precision industrial applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | REF20xx Low-Drift, Low-Power, Dual-Output, VREF and VREF / 2 Voltage Reference datasheet (Rev. E) | PDF | HTML | 2022. 2. 3 | |
| 애플리케이션 노트 | Voltage Reference Selection and Design Tips For Data Converters (Rev. B) | PDF | HTML | 2024. 1. 9 | ||
| e북 | Tips and tricks for designing with voltage references (Rev. A) | 2021. 5. 7 | |||
| 백서 | Simplifying Signal Chain Design for High Performance in Small Systems | 2020. 10. 22 | |||
| Application brief | Voltage Reference Solutions in Motor Control Drives | 2019. 7. 29 | |||
| e북 | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019. 6. 28 | |||
| 백서 | Voltage reference selection basics white paper (Rev. A) | 2018. 10. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DIP-ADAPTER-EVM — DIP 어댑터 평가 모듈
소형 표면 실장 IC(집적 회로)와 쉽고 빠르며 경제적인 방식으로 인터페이싱하는 방법을 제공하는 DIP 어댑터 평가 모듈(DIP-ADAPTER-EVM)로 연산 증폭기 프로토타이핑 및 테스트 속도를 높이세요. 제품에 포함된 Samtec 터미널 스트립을 사용하여 지원되는 연산 증폭기를 연결하거나 기존 회로에 직접 연결할 수 있습니다.
DIP 어댑터 EVM 키트는 다음을 포함해 가장 널리 사용되는 6개의 업계 표준 패키지를 지원합니다.
- D 및 U(SOIC-8)
- PW(TSSOP-8)
- DGK(MSOP-8, VSSOP-8)
- (...)
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
PMP22220 — 1500W AC 스위치 브리지리스 PFC 레퍼런스 설계
PMP23069 — 16A 최대 입력을 지원하는 3kW, 180W/in3 단상 토템 폴 브리지리스 PFC 레퍼런스 설계
이 레퍼런스 설계는 C2000 F28003x 및 F28004x 마이크로컨트롤러를 사용하여 연속 전도 모드 토템 폴 PFC(역률 보정 컨버터)를 제어하는 방법을 보여줍니다. 또한 PFC는 그리드 연결(전류 제어) 모드에서 인버터로 작동합니다. 이 컨버터는 16ARMS의 최대 입력 전류와 3.6kW의 피크 전력을 지원하도록 설계되었습니다. 일체형 드라이버와 보호 기능을 갖춘 LMG3522 상단면 냉각 GaN 장치는 효율성을 높여주고 전원 공급 장치의 크기와 복잡성은 감소시켜 줍니다. F28004x 또는 F28002x 기반 C2000 (...)
TIDA-00178 — Sitara AM437x와 Sin/Cos 인코더의 인터페이스 레퍼런스 디자인
The TIDA-00178 reference design is an EMC compliant industrial interface to Sin/Cos position encoders. Applications include industrial drives, which require accurate speed and position control.
The design utilizes a 16-bit dual sample ADC with drop-in compatible 14- or 12-bit versions available, (...)
TIDA-00316 — 의사 차동 ADC/MCU와 전류 출력 홀 센서 및 CT의 인터페이스를 위한 레퍼런스 디자인
This reference design provides interfacing current output Hall sensors and current transformers to pseudo-differential ADC (standalone and integrated into MCU). Two variants of signal conditioning circuits are designed to measure motor current using bipolar and unipolar supply voltages (...)
TIDA-00368 — 차동 ADC/MCU와 전류 출력 홀 센서 및 CT의 인터페이스를 위한 레퍼런스 디자인
This reference design provides interfacing current output Hall sensors and current transformers to differential ADC (standalone and integrated into MCU). The differential signal conditioning circuit is designed to measure motor current with an accuracy of ±0.5% across operating (...)
TIDA-01063 — PCB Rogowski 코일 센서를 사용하는 고정밀 AC 전류 측정 레퍼런스 디자인
TIPD156 — 낮은 드리프트 양방향 단일 전압 저압측 전류 감지 레퍼런스 디자인
This Verified TI Precision Design implements a low-drift, bi-directional, low-side, single-supply current sensing solution that measures load currents from -2.5 A to +2.5 A. The output range is from 250 mV to 2.75 V, with 0 A current centered at 1.5 V. To achieve low-drift performance, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDC) | 5 | Ultra Librarian |