Product details

Output options Fixed Output Iout (Max) (A) 0.15 Vin (Max) (V) 6.5 Vin (Min) (V) 2.7 Vout (Max) (V) 3.3 Vout (Min) (V) 1.2 Fixed output options (V) 1.2, 1.5, 1.8, 2.5, 2.8, 3, 3.3 Noise (uVrms) 190 Iq (Typ) (mA) 0.001 Thermal resistance θJA (°C/W) 73 Rating Catalog Load capacitance (Min) (µF) 2 Regulated outputs (#) 1 Features Enable, Reverse Current Protection Accuracy (%) 2 PSRR @ 100 KHz (dB) 30 Dropout voltage (Vdo) (Typ) (mV) 245 Operating temperature range (C) -40 to 125
Output options Fixed Output Iout (Max) (A) 0.15 Vin (Max) (V) 6.5 Vin (Min) (V) 2.7 Vout (Max) (V) 3.3 Vout (Min) (V) 1.2 Fixed output options (V) 1.2, 1.5, 1.8, 2.5, 2.8, 3, 3.3 Noise (uVrms) 190 Iq (Typ) (mA) 0.001 Thermal resistance θJA (°C/W) 73 Rating Catalog Load capacitance (Min) (µF) 2 Regulated outputs (#) 1 Features Enable, Reverse Current Protection Accuracy (%) 2 PSRR @ 100 KHz (dB) 30 Dropout voltage (Vdo) (Typ) (mV) 245 Operating temperature range (C) -40 to 125
SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 WSON (DRV) 6 4 mm² 2 x 2
  • Input Voltage Range: 2.7 V to 6.5 V
  • Ultralow IQ: 1 μA
  • Reverse Current Protection
  • Low ISHDN: 150 nA
  • Supports 200-mA Peak Output
  • Low Dropout: 245 mV at 50 mA
  • 2% Accuracy Over Temperature
  • Available in Fixed-Output Voltages: 1.2 V to 5 V
  • Thermal Shutdown and Overcurrent Protection
  • Packages: SOT-23-5, WSON-6
  • Input Voltage Range: 2.7 V to 6.5 V
  • Ultralow IQ: 1 μA
  • Reverse Current Protection
  • Low ISHDN: 150 nA
  • Supports 200-mA Peak Output
  • Low Dropout: 245 mV at 50 mA
  • 2% Accuracy Over Temperature
  • Available in Fixed-Output Voltages: 1.2 V to 5 V
  • Thermal Shutdown and Overcurrent Protection
  • Packages: SOT-23-5, WSON-6

The TPS706 series of linear voltage regulators are ultralow, quiescent current devices designed for power-sensitive applications. A precision band-gap and error amplifier provides 2% accuracy over temperature. Quiescent current of only 1 µA makes these devices ideal solutions for battery-powered, always-on systems that require very little idle-state power dissipation. These devices have thermal-shutdown, current-limit, and reverse-current protection for added safety.

These regulators can be put into shutdown mode by pulling the EN pin low. The shutdown current in this mode goes down to 150 nA, typical.

The TPS706 series is available in WSON-6 and SOT-23-5 packages.

The TPS706 series of linear voltage regulators are ultralow, quiescent current devices designed for power-sensitive applications. A precision band-gap and error amplifier provides 2% accuracy over temperature. Quiescent current of only 1 µA makes these devices ideal solutions for battery-powered, always-on systems that require very little idle-state power dissipation. These devices have thermal-shutdown, current-limit, and reverse-current protection for added safety.

These regulators can be put into shutdown mode by pulling the EN pin low. The shutdown current in this mode goes down to 150 nA, typical.

The TPS706 series is available in WSON-6 and SOT-23-5 packages.

Download

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
TPS7A24 ACTIVE 200-mA, 18-V, ultra-low-IQ, low-dropout (LDO) voltage regulator with enable ; Pin-to-pin option offering wider VIN (18 V) and ultra-low-IQ (2 µA)

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TPS706 150-mA, 6.5-V, 1-µA IQ Voltage Regulators with Enable datasheet (Rev. A) 12 Jan 2015
Technical article 3 quiescent-current (Iq) specifications you need to understand 12 Nov 2021
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 18 Feb 2021
Application note A Topical Index of TI LDO Application Notes (Rev. F) 27 Jun 2019
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 21 Mar 2018
Technical article Extend battery life with a LDO, a voltage supervisor and a FET 21 Feb 2017
User guide Universal Low-Dropout (LDO) Linear Voltage Regulator EVM User's Guide 12 Oct 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DEM-SOT23LDO — DEM-SOT23LDO Compatible With Most Positive-Output LDO Regulators in 5- or 6-Lead SOT23 (DBV) Package

Out of stock on TI.com
Evaluation board

TUSB217EVM — USB 2.0 high-speed signal conditioner evaluation module

The TUSB217 evaluation module (EVM) can be used to evaluate the signal conditioning abilities of the TUSB217 device for various applications.
In stock
Limit: 2
Simulation model

TPS70612 PSpice Transient Model (Rev. A)

SBVM443A.ZIP (45 KB) - PSpice Model
Simulation model

TPS70618 PSpice Transient Model (Rev. A)

SBVM444A.ZIP (46 KB) - PSpice Model
Simulation model

TPS70625 PSpice Transient Model (Rev. A)

SBVM445A.ZIP (45 KB) - PSpice Model
Simulation model

TPS70630 PSpice Transient Model (Rev. A)

SBVM446A.ZIP (45 KB) - PSpice Model
Simulation model

TPS70633 PSpice Transient Model (Rev. A)

SBVM447A.ZIP (44 KB) - PSpice Model
Simulation model

TPS70615 Unencrypted PSpice Transient Model

SBVM453.ZIP (1 KB) - PSpice Model
Simulation model

TPS70615 PSpice Transient Model

SBVM454.ZIP (46 KB) - PSpice Model
Simulation model

TPS70628 Unencrypted PSpice Transient Model

SBVM455.ZIP (2 KB) - PSpice Model
Simulation model

TPS70628 PSpice Transient Model

SBVM456.ZIP (49 KB) - PSpice Model
Simulation model

TPS70630 Unencrypted PSpice Transient Model

SBVM457.ZIP (2 KB) - PSpice Model
Simulation model

TPS70612 Unencrypted PSpice Transient Model

SBVM493.ZIP (1 KB) - PSpice Model
Simulation model

TPS70625 Unencrypted PSpice Transient Model

SBVM494.ZIP (1 KB) - PSpice Model
Simulation model

TPS70633 Unencrypted PSpice Transient Model

SBVM495.ZIP (2 KB) - PSpice Model
Simulation model

TPS70618 Unencrypted PSpice Transient Model

SBVM496.ZIP (1 KB) - PSpice Model
Reference designs

TIDA-00638 — Reference Design for Isolated Gate Driver Power Stage with Active Miller Clamp for Solar Inverters

This reference design consists of a single module with a reinforced, isolated IGBT gate driver with a dedicated gate drive power supply. This compact reference design controls IGBTs in solar inverters.  The design uses a reinforced isolated IGBT gate driver with built-in IGBT DESAT detection (...)
Reference designs

TIDA-01349 — IPM Interface Reference Design for Inverters Using Single Package Six Channel Digital Isolator

This reference design realizes a three-phase inverter subsystem for AC inverter drives and servo drives using an intelligent power module (IPM). Reinforced isolation is present between the microcontroller (MCU) and the IPM-based power stage. The PWM signals are isolated using the single-package, (...)
Reference designs

TIDA-00446 — Small Form-Factor Reinforced Isolated IGBT Gate Drive Reference Design for 3 Phase Inverter

The TIDA-00446 reference design consists of six reinforced isolated IGBT gate drivers along with dedicated gate drive power supplies. This compact reference design is intended to control IGBT’s in 3-phase inverters like AC drives, uninterruptible power supplies (UPS) and solar inverters. The (...)
Package Pins Download
SOT-23 (DBV) 5 View options
WSON (DRV) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos