Top

Product details

Parameters

Output options Fixed Output Iout (Max) (A) 0.05 Vin (Max) (V) 16 Vin (Min) (V) 3.2 Vout (Max) (V) 5 Vout (Min) (V) 3 Fixed output options (V) 3, 3.2, 3.3, 3.8, 5 Noise (uVrms) 190 Iq (Typ) (mA) 0.09 Thermal resistance θJA (°C/W) 180 Load capacitance (Min) (µF) 2.2 Rating Catalog Regulated outputs (#) 1 Features Enable Accuracy (%) 2 Dropout voltage (Vdo) (Typ) (mV) 120 Operating temperature range (C) -40 to 125 open-in-new Find other Linear regulators (LDO)

Package | Pins | Size

SOT-23 (DBV) 5 5 mm² 1.60 x 2.90 SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 open-in-new Find other Linear regulators (LDO)

Features

  • 50-mA Low-Dropout Regulator
  • Fixed Output Voltage Options: 5 V, 3.8 V, 3.3 V, 3.2 V, and 3 V
  • Dropout Typically 120 mV at 50 mA
  • Thermal Protection
  • Less Than 1-uA Quiescent Current in Shutdow
  • \x9640°C to 125°C Operating Junction Temperature Range
  • 5-Pin SOT-23 Package
  • ESD Protection Verified to 1.5 kV Human Body Model (HBM) per MIL-STD-883C
open-in-new Find other Linear regulators (LDO)

Description

The TPS760xx is a 50 mA, low dropout (LDO) voltage regulator designed specifically for battery-powered applications. A proprietary BiCMOS fabrication process allows the TPS760xx to provide outstanding performance in all specifications critical to battery-powered operation.

The TPS760xx is available in a space-saving SOT\x9623 package and operates over a junction temperature range of \x9640°C to 125°C.

open-in-new Find other Linear regulators (LDO)
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality and pinout but is not an equivalent to the compared device:
TPS709 ACTIVE 150-mA, 30-V, ultra-low-IQ, low-dropout voltage regulator with reverse current protection & enable TPS709 is the next-generation version of this device with lower quiescent current and a wider input voltage range.

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 11
Type Title Date
* Datasheet Low-Power 50-mA Low-Dropout Linear Regulators datasheet (Rev. D) May 04, 2001
Application notes ESR, Stability, and the LDO Regulator (Rev. A) Jan. 07, 2020
Application notes Fundamental Theory of PMOS LDO Voltage Regulators (Rev. A) Aug. 17, 2018
Technical articles LDO basics: capacitor vs. capacitance Aug. 01, 2018
Technical articles LDO Basics: Preventing reverse current Jul. 25, 2018
Technical articles LDO basics: introduction to quiescent current Jun. 20, 2018
Application notes LDO Noise Demystified (Rev. A) Aug. 09, 2017
Application notes LDO PSRR Measurement Simplified (Rev. A) Aug. 09, 2017
Technical articles LDO basics: noise – part 1 Jun. 14, 2017
User guides DEM-SOT23LDO Demonstration Fixture User's Guide (Rev. A) Jun. 02, 2005
Application notes Technical Review of Low Dropout Voltage Regulator Operation And Performance Aug. 30, 1999

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
5

Design tools & simulation

SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

Reference designs

REFERENCE DESIGNS Download
Isolated power architecture reference design for communication and analog input/output modules
TIDA-00300 This reference design provides a simple means through which to isolate I2C or SPI type communication lines. This is often required in Grid Infrastructure applications such as, protertion relays and circuit breakers, where high voltages are involved. This reference design provides the complete (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Direct Down-Conversion System with I/Q Correction
TIDA-00078 The I/Q Correction block implemented in the Field Programmable Gate Array (FPGA) of the TSW6011EVM helps users to adopt a direct down conversion receiver architecture in a wireless system. The I/Q correction block consists of a single-tap blind algorithm, which corrects the frequency-independent I/Q (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOT-23 (DBV) 5 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos