SN65HVD24
- Common-mode voltage range (–20 V to 25 V) more than doubles TIA/EIA-485 requirement
- Receiver equalization extends cable length, signaling rate (SN65HVD2[3,4])
- Reduced unit-load for up to 256 nodes
- Bus I/O protection to over 16-kV HBM
- Failsafe receiver for open-circuit, short-circuit, and idle-bus conditions
- Low standby supply current 1 µA (maximum)
- More than 100 mV receiver hysteresis
The transceivers in the SN65HVD2x family offer performance far exceeding typical RS-485 devices. In addition to meeting all requirements of the TIA/EIA ‑485-A standard. The SN65HVD2x family operates over an extended range of common-mode voltages and has features such as high ESD protection, wide receiver hysteresis, and failsafe operation. This family of devices is designed for long-cable networks, and other applications where the environment is too harsh for ordinary transceivers.
These devices are designed for bidirectional data transmission on multipoint twisted-pair cables. Example applications are digital motor controllers, remote sensors and terminals, industrial process control, security stations, and environmental control systems.
These devices combine a 3-state differential driver and a differential receiver that operate from a single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a differential bus port that offers minimum loading to the bus. This port features an extended common-mode voltage range, making the device suitable for multipoint applications over long cable runs.
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | SN65HVD2x Extended Common-Mode RS-485 Transceivers datasheet (Rev. G) | PDF | HTML | 2022/9/20 | ||
| 技術文章 | The secret to extending RS-485 communication performance | PDF | HTML | 2015/7/24 | |||
| 應用說明 | Use Receiver Equalization to Extend RS-485 Data Communications* | 2004/7/6 | ||||
| 應用說明 | The RS-485 Unit Load and Maximum Number of Bus Connections | 2004/3/15 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
RS485-HF-DPLX-EVM — RS-485 半雙工評估模組
TIDA-00214 — 半雙工、非隔離式 RS-485 BoosterPack 參考設計
半雙工、非隔離式 RS-485 BoosterPack 方便使用者評估 TI 的 RS-485 收發器,適用於建築管理系統 (BMS)、工廠自動化、建築自動化及 HVAC 等應用。此 BoosterPack 經過設計與測試,在纜線長度達 1000 英尺且連接 32 個節點的情況下,可支援高達 1.25Mbps 的資料速率。板載的延伸共模 RS-485 收發器可輕鬆拆卸,並替換成任何 TI 的半雙工、8 針腳 SOIC RS-485 收發器。系統設計人員可藉此評估具備不同效能目標的多款收發器。RS-485 BoosterPack 與 20 針腳及 40 針腳的 TI LaunchPad 相容。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。