MSP432E401Y

ACTIVO

MCU SimpleLink™ 32 bit Arm Cortex-M4F con ethernet, CAN, 1MB Flash y 256 KB RAM

Detalles del producto

CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 90 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 90 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
TQFP (PDT) 128 256 mm² 16 x 16
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Integrated Ethernet PHY
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 128-Pin TQFP (PDT)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Integrated Ethernet PHY
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 128-Pin TQFP (PDT)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C

The SimpleLink MSP432E401Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E401Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E401Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E401Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E401Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

The SimpleLink MSP432E401Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E401Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E401Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E401Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E401Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

Descargar Ver vídeo con transcripción Video
Soporte de diseño limitado de TI disponible

Los proyectos existentes que utilizan este producto tienen un soporte de diseño limitado de TI. Si está disponible, encontrará material adicional, software y herramientas relevantes en la página del producto. Los diseños existentes que utilizan este producto tienen un soporte de diseño limitado de TI. Solicite asistencia limitada para diseño en los foros de asistencia TI E2E™.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 18
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet MSP432E401Y SimpleLink™ Ethernet Microcontroller datasheet PDF | HTML 26 oct 2017
* Errata MSP432E4 SimpleLink™ Microcontrollers Silicon Errata (Rev. A) PDF | HTML 27 jun 2025
* User guide MSP432E4 SimpleLink™ Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 25 oct 2018
EVM User's guide TI Sensor Control Board User's Guide PDF | HTML 09 dic 2021
EVM User's guide LEDMCUEVM-132 MSP432™ LED Controller Evaluation Module PDF | HTML 06 oct 2020
Cybersecurity advisory Variable Time Tag Comparison on SimpleLink™ Devices PDF | HTML 05 jun 2020
White paper Understanding Security Features for SimpleLink™ MSP432E4 Ethernet MCUs (Rev. A) 31 ene 2019
Application note Using SimpleLink™ MSP432E4 microcontrollers over the JTAG interface (Rev. A) 11 ene 2019
User guide SimpleLink™ Ethernet MSP432E401Y MCU LaunchPad™ Development Kit User's Guide (Rev. B) PDF | HTML 11 sep 2018
Technical article An out-of-the-box Internet of Things: building a seamless and secure smart home ne PDF | HTML 12 jun 2018
Technical article Boost your SimpleLink MCU development with the Open On-Chip Debugger PDF | HTML 11 abr 2018
White paper Reducing the cost, power and size of connectivity in industrial gateway designs 28 mar 2018
Third party document uVision Lab for the TI MSP432E4 LaunchPad Board 28 dic 2017
Technical article Merging wired and wireless connectivity to build an intelligent gateway to the clo PDF | HTML 28 nov 2017
User guide MSP432E4 SimpleLink™ Microcontrollers Bootloader (BSL) User's Guide (Rev. A) 16 nov 2017
Application note System Design Guidelines for SimpleLink™ MSP432E4 Microcontrollers 31 oct 2017
Application note Using Feature Set of I2C Master on SimpleLink MSP432E4 Microcontrollers 27 oct 2017
White paper Building a gateway from the sensors to the cloud 26 oct 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LAUNCHXL-CC2640R2 — Kit de desarrollo CC2640R2 LaunchPad™ para MCU inalámbrica SimpleLink™ Bluetooth® de baja energía

Este LaunchPad™ acelera el desarrollo con una conexión Bluetooth® baja energía (BLE) mediante los dispositivos CC2640R2F o CC2640R2L. El SDK compatible ofrece una pila de protocolo Bluetooth 5 totalmente cualificada para aplicaciones BLE de modo único que admiten el modo de alta velocidad y capas (...)

Placa de evaluación

LEDMCUEVM-132 — Placa de comunicaciones MCU MSP432E401Y para módulos de evaluación de LED

El LEDMCUEVM-132 implementa comunicaciones SPI que admiten múltiples dispositivos en el bus, comunicaciones UART para la familia de dispositivos LMMS, transceptor CAN para UART para controlar la familia de dispositivos LMM, 4 señales de PWM para atenuación, varias E/S, alimentación de 5 V aislada, (...)

Guía del usuario: PDF | HTML
Placa de evaluación

LP87642Q1EVM — Módulo de evaluación LP87642-Q1 para convertidor reductor de 4 fases de una salida conforme a la seg

La placa LP87642Q1EVM se puede utilizar para probar, demostrar, depurar y configurar uno o múltiples circuitos integrados de gestión de potencia LP8764-Q1 para aplicaciones industriales y automotrices. El dispositivo integrado es el LP876411E2RQRQ1, que tiene una configuración de 4 fases a 2.2 MHz (...)

Guía del usuario: PDF | HTML
Placa de evaluación

LP87644Q1EVM — Módulo de evaluación LP87644-Q1 para convertidor reductor de 4 salidas

La placa LP87644Q1EVM se puede utilizar para probar, demostrar, depurar y configurar uno o múltiples circuitos integrados de gestión de potencia LP8764-Q1 para aplicaciones industriales y automotrices. El dispositivo integrado es el LP876441E4RQKRQ1, que tiene una configuración de fase de 1+1+1+1 (...)
Guía del usuario: PDF | HTML
Placa de evaluación

LP877451Q1EVM — Módulo de evaluación LP8774x-Q1 del PMIC de configuración de bajo nivel de ruido con reductor triple

El dispositivo LP8774x-Q1 está diseñado para satisfacer los requisitos de administración de potencia de los circuitos integrados monolíticos de microondas (MMIC) para radares AWR e IWR en múltiples aplicaciones de radar automotriz e industrial. El dispositivo tiene tres convertidores de CC/CC (...)

Guía del usuario: PDF | HTML
Placa de evaluación

MMWAVEPOEEVM — Módulo de evaluación de alimentación a través de Ethernet (PoE) del sensor de ondas milimétricas

El MMWAVEPOEEVM permite la alimentación a través de Ethernet (PoE) para la plataforma de tarjeta portadora de sensores mmWave de TI (MMWAVEICBOOST y los módulos de HW compatibles se venden por separado). MMWAVEPOEEVM simplifica la implementación para el desarrollo, la prueba y la producción al (...)

Guía del usuario: PDF | HTML
Placa de evaluación

TI-SCB — Placa de control de sensores (SCB) para módulos de evaluación

El SCB está diseñado para ser utilizado con configuraciones específicas de módulos de evaluación (EVM). Cada EVM tiene una guía de usuario individual que explica cómo utilizar el SCB con ese EVM específico.
Guía del usuario: PDF | HTML
Placa de evaluación

TMCS2100CHAREVM — Módulo de evaluación de caracterización TMCS2100

El EVM de caracterización TMCS2100 (CHAREVM) es una placa que se utiliza para facilitar el proceso de caracterización de los dispositivos TMCS2100 en un sistema. Esta guía del usuario describe cómo configurar el TMCS2100CHAREVM para utilizarlo con el TMCS2100EVM. El CHAREVM no está diseñado como un (...)

Placa de evaluación

TPS65224Q1EVM — Módulo de evaluación TPS652241-Q1

La placa TPS65224Q1EVM se puede utilizar para probar, demostrar, depurar y configurar el circuito integrado de gestión de potencia TPS6522x para aplicaciones industriales y automotrices. El dispositivo integrado es TPS6522430-Q1 que tiene una configuración de fase 2+1+1 para los convertidores (...)
Guía del usuario: PDF | HTML
Placa de evaluación

TPS6593EVM — Módulo de evaluación TPS6593 para un PMIC de fase reconfigurable con cinco reguladores reductores y

El módulo de evaluación TP6593EVM puede utilizarse para demostraciones, depuración, pruebas y configuración de uno o varios circuitos integrados de gestión de potencia TPS6593x para aplicaciones industriales. El dispositivo instalado de serie es el TPS65930400RWERQ1, que son las cuatro (...)
Guía del usuario: PDF | HTML
Placa de evaluación

XDS110ISO-EVM — Módulo de evaluación de complemento aislado XDS110 para los controlSOM de C2000 y Sitara™

La placa de complemento aislada XDS110 es un módulo de evaluación de depuración y programación flash en tiempo real para los controlSOM de C2000 y Sitara. Se puede conectar a los controlSOM de C2000 y Sitara a través de un conector no aislado de 120 pines o a través de un conector de 16 pines (...)
Guía del usuario: PDF | HTML
Sonda de depuración

MSP432-DEBUGGERS — Depuradores para MSP432

MSP432 MCUs are designed to work with a variety of debuggers from Texas Instruments and third party vendors.

  • Texas Instruments:
    • XDS100v2:
      • The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest (...)
Sonda de depuración

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

Kit de desarrollo

CC3120BOOST — Procesador de red inalámbrica SimpleLink™ Wi-Fi® CC3120 de módulo complementario BoosterPack™

El procesador de red inalámbrica SimpleLink™ Wi-Fi® CC3120 proporciona a los usuarios la flexibilidad necesaria para agregar Wi-Fi a cualquier microcontrolador (MCU). El módulo enchufable CC3120 BoosterPack™ (CC3120BOOST) es una placa que puede conectarse fácilmente a los kits MCU Launchpad de TI (...)

Guía del usuario: PDF
Kit de desarrollo

LP-XDS110ET — Kit de desarrollo XDS110ET LaunchPad™ depurador con software EnergyTrace™

El depurador del kit de desarrollo LaunchPad LP-XDS110ET es una herramienta para programar y depurar microcontroladores, microprocesadores y dispositivos DSP compatibles con XDS de Texas Instruments (TI). El LP-XDS110ET puede conectarse directamente a kits de desarrollo Split Launchpad a través del (...)

Kit de desarrollo

MSP-EXP432E401Y — Kit de desarrollo LaunchPad™ MSP432E401Y para Ethernet SimpleLink™ MCU

El kit de desarrollo LaunchPad™ para microcontroladores Ethernet MSP432E401Y de SimpleLink™ es una plataforma de evaluación intuitiva para MCU Ethernet basadas en SimpleLink™ Arm® Cortex®-M4F. El kit de desarrollo Ethernet LaunchPad destaca la MCU MSP432E401Y con MAC y PHY Ethernet integrados y una (...)

Guía del usuario: PDF | HTML
Kit de desarrollo de software (SDK)

SIMPLELINK-MSP432-SDK SimpleLink MSP432P4 High-precision ADC MCU Software Development

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

SIMPLELINK-MSP432E4-SDK SimpleLink MSP432E4 Ethernet MCU Software Development Kit

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

SIMPLELINK-WIFI-CC3120-SDK-PLUGIN — SIMPLELINK-SDK-WIFI-PLUGIN

Nota importante:

Los SDK de SimpleLink se actualizan de manera regular. Para obtener las últimas actualizaciones de la versión, haga clic en Alertarme arriba.

El SDK de CC3120 contiene controladores, muchas aplicaciones de muestra para funciones Wi-Fi e Internet, además de documentación necesaria (...)

Guía del usuario: PDF
Controlador o biblioteca

SIMPLELINK-SDK-TI-15-4-STACK-PLUGIN TI 15.4 Stack plug-in for the SimpleLink™ MCU SDK

The SimpleLink™ SDK TI 15.4 Stack Plug-in is a companion software package that enables the use of the IEEE 802.11.15.4 stack from TI on any standard SimpleLink microcontroller (MCU). This plug-in supports the SimpleLink Sub-1 GHz CC1310 wireless MCU as a network processor. This software package (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
IDE, configuración, compilador o depurador

ARM-CGT — Herramientas de generación de código Arm®: compilador

Las herramientas de generación de código (compilador) TI Arm® son compatibles con el desarrollo de aplicaciones para plataformas basadas en TI Arm, en especial aquellas con los dispositivos de las series Cortex-M y Cortex-R de TI Arm.

Las herramientas actuales ARM-CGT-CLANG se derivan del (...)

Guía del usuario: PDF | HTML
IDE, configuración, compilador o depurador

CCSTUDIO Code Composer Studio™ integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

MSPKEIL — ARM® Keil® MDK

MDK Microcontroller Development Kit

ARM® Keil® MDK is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications. Keil MDK supports SimpleLink™ MSP432™ microcontrollers, and includes a fully integrated debugger for source and disassembly level (...)

IDE, configuración, compilador o depurador

SYSCONFIG Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

ULPADVISOR — Asesor de ULP (potencia ultrabaja)

ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
Capacitación en línea

SIMPLELINK-ACADEMY-MSP432E4 SimpleLink™ Academy for MSP432E4

SimpleLink Academy for MSP432E4 delivers easy-to-use training modules that span a wide range of topics for all LaunchPads in the MSP432E family of microcontrollers
Productos y hardware compatibles

Productos y hardware compatibles

Enchufe

SIMPLELINK-BLE-PLUGIN-AZURE-GATEWAY-EXAMPLE-PACK SimpleLink™ Bluetooth low energy plug-in Azure™ gateway example pack

The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Enchufe

SIMPLELINK-SDK-BLUETOOTH-PLUGIN Bluetooth Plug-in for SimpleLink™ MCU SDK

The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Enchufe

SIMPLELINK-SDK-LVGL-PLUGIN SimpleLink™ SDK LittlevGL plug-in

The SimpleLink™ SDK LVGL Plugin is a companion software package that enables advanced graphics capabilities on various SimpleLink™ MCU platforms by integrating the free and open-source 3rd party library, LittlevGL, into the SimpleLink SDK ecosystem. The Plug-in provides example hardware abstraction (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Enchufe

SIMPLELINK-SDK-WIFI-PLUGIN SimpleLink™ software development kit (SDK) Wi-Fi® plug-in

The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)

Productos y hardware compatibles

Productos y hardware compatibles

Examinar Opciones de descarga
Herramienta de programación de software

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Productos y hardware compatibles

Productos y hardware compatibles

Iniciar Opciones de descarga
Modelo de simulación

MSP432E401Y 128-TQFP (PDT) BSDL Model

SLAM320.ZIP (4 KB) - BSDL Model
Modelo de simulación

MSP432E401Y 128-TQFP (PDT) IBIS Model

SLAM321.ZIP (737 KB) - IBIS Model
Archivo Gerber

Altium MMWAVEPOEEVM EVM Design Files

SWRC364.ZIP (9771 KB)
Diseños de referencia

PMP23630 — Diseño de referencia de una fuente de alimentación (PSU) de 30 kW en HVDC para centros de datos.

Este diseño de referencia es una fuente de alimentación de 30 kW, de alta eficiencia y dos etapas con una salida de corriente continua de alta tensión (HVDC). La primera etapa es un convertidor de corrección del factor de potencia (PFC) de condensador flotante de tres niveles que se ejecuta desde (...)
Test report: PDF
Diseños de referencia

TIDA-050029 — Diseño de referencia de controlador LED SEPIC doble de 45 W y 15 W para iluminación automotriz

Este diseño de referencia muestra el controlador LED de doble canal TPS92682-Q1 que se utiliza en una aplicación de iluminación frontal automotriz con funciones de luz de carretera (HB) y luz de cruce (LB), luz de circulación diurna (DRL) y luz de posición (POS). El diseño utiliza un dispositivo (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-050040 — Diseño de referencia de módulo de controlador de faros LED para automoción para sustitución de halóg

Este diseño de referencia muestra el TPS92682 y el TPS92520 como un controlador LED de tres canales totalmente autofuncional para aplicaciones de faros.  El diseño está pensado para sustituir un módulo de faros halógenos de bajo costo compatible con un módulo de control de la carrocería de uso (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDM-1018 — Diseño de referencia de alimentación a través de Ethernet® (PoE) para puertas de enlace industriales

Este diseño de referencia integra la potencia a través de Ethernet (PoE) de TI con el microcontrolador (MCU) Ethernet MSP432E4 SimpleLink™ de alto rendimiento con Ethernet para permitir a los clientes desarrollar aplicaciones para la Internet de las cosas (IoT) en una placa de factor de forma (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TQFP (PDT) 128 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos