LM331
- Ensured Linearity 0.01% Maximum
- Improved Performance in Existing Voltage-to-
Frequency Conversion Applications - Split or Single-Supply Operation
- Operates on Single 5-V Supply
- Pulse Output Compatible With All Logic Forms
- Excellent Temperature Stability: ±50 ppm/°C
Maximum - Low Power Consumption: 15 mW Typical at 5 V
- Wide Dynamic Range, 100 dB Minimum at 10-kHz
Full Scale Frequency - Wide Range of Full Scale Frequency:
1 Hz to 100 kHz - Low-Cost
The LMx31 family of voltage-to-frequency converters are ideally suited for use in simple low-cost circuits for analog-to-digital conversion, precision frequency-to-voltage conversion, long-term integration, linear frequency modulation or demodulation, and many other functions. The output when used as a voltage-to-frequency converter is a pulse train at a frequency precisely proportional to the applied input voltage. Thus, it provides all the inherent advantages of the voltage-to-frequency conversion techniques, and is easy to apply in all standard voltage-to-frequency converter applications.
Further, the LMx31A attain a new high level of accuracy versus temperature which could only be attained with expensive voltage-to-frequency modules. Additionally the LMx31 are ideally suited for use in digital systems at low power supply voltages and can provide low-cost analog-to-digital conversion in microprocessor-controlled systems. And, the frequency from a battery-powered voltage-to-frequency converter can be easily channeled through a simple photo isolator to provide isolation against high common-mode levels.
The LMx31 uses a new temperature-compensated band-gap reference circuit, to provide excellent accuracy over the full operating temperature range, at power supplies as low as 4 V. The precision timer circuit has low bias currents without degrading the quick response necessary for 100-kHz voltage-to-frequency conversion. And the output are capable of driving 3 TTL loads, or a high-voltage output up to 40 V, yet is short-circuit-proof against VCC.
기술 문서
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LMx31x Precision Voltage-to-Frequency Converters datasheet (Rev. C) | PDF | HTML | 2015/09/29 |
| Application note | AN-240 Wide-Range Current-to-Frequency Converters (Rev. B) | 2013/04/29 | ||
| Application note | Versatile Monolithic V/Fs can Compute as Well as Convert with High Accuracy (Rev. B) | 2013/04/29 | ||
| Application note | AN-265 An Electronic Watt-Watt-Hour Meter (Rev. B) | 2013/04/26 | ||
| Application note | New Phase-Locked-Loops Have Advangs as Freq to Voltage Cnvrtrs (Rev. B) | 2013/04/26 | ||
| Application note | AN-311 Theory and Applications of Logarithmic Amplifiers (Rev. B) | 2013/04/23 | ||
| Application note | AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B) | 2013/04/23 | ||
| Application note | An Acoustic Transformer Powered Super-High Isolation Amplifier | 2004/10/04 | ||
| Application note | 2-Way Multiplexed LCD Drv & Low Cost ADC Using V/F Tech w/COP8 Microcontrollers | 2004/05/14 | ||
| Application note | Freq-to-Vltg Converter Uses Sample-and-Hold to Improve Response & Ripple | 2002/10/03 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| PDIP (P) | 8 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치