XTR200
- Mode pin for selectable current or voltage output
- Current output transfer function set by a single external resistor
- Voltage output mode has a fixed gain of 3.75V/V
- Integrated output transistor eliminates external components
- Capable of output voltages within 1mV of ground on a single supply
- Wide supply voltage range: 8V to 60V
- Wide specified temperature range: –40°C to +125°C
- Low input offset voltage: ±200µV
- Low input offset voltage drift: ±0.5µV/°C
- Excellent span error (current mode): 0.01%
- Excellent gain error (voltage mode): 0.007%
- Output error flag (EF)
- Output disable (OD)
- Extremely small 3mm × 2mm WSON package
The XTR200 is a high-voltage, precision, output driver for 3-wire current or voltage systems, designed for standard industrial signal levels such as 0mA to 20mA, 4mA to 20mA, and 0V to 10V. The mode pin configures the device for either current or voltage output and eliminates the need to change external components to switch between modes. In current-output mode, the ratio between input voltage and output current is set by a single resistor, RSET. In voltage-output mode, the XTR200 has a fixed gain of 3.75V/V which is set by integrated, high-precision, thin-film, resistors.
The device integrates a low-leakage PMOS output transistor and short-circuit current protection, further reducing the need for external components. An external PNP or PMOS transistor can be used with the XTR200 to reduce on-chip power dissipation. The on-chip short-circuit protection also protects external transistors from damaging overcurrent events.
The XTR200 error flag pin (EF) indicates several temperature or output fault conditions. The output disable pin (OD) places the output pin into a high-impedance state with very low leakage.
The XTR200 is available in a small 3mm × 2mm, 10-pin WSON surface-mount package.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | XTR200 Precision, 3-Wire, Current-and-Voltage Transmitter datasheet (Rev. A) | PDF | HTML | 2025/09/25 |
| Product overview | Simplify 4-20mA Current and Voltage Output 3-Wire Transmitters With XTR200 | PDF | HTML | 2025/10/13 | |
| Application note | Using the XTR200 for M-CRPS Current Monitor Outputs | PDF | HTML | 2025/10/10 | |
| Certificate | XTR200EVM EU Declaration of Conformity (DoC) | 2025/03/11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DQC) | 10 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.