PTH08T250W

ACTIVE

50A, 4.5V to 14V Input, Non-Isolated, Wide Output, Adjustable Power Module with TurboTrans

Top

Product details

Parameters

Iout (Max) (A) 50 Vin (Min) (V) 4.5 Vin (Max) (V) 14 Vout (Min) (V) 0.7 Vout (Max) (V) 3.6 Soft start Fixed Features Current Sharing, TurboTrans Operating temperature range (C) -40 to 85 Iq (Typ) (mA) 100 Regulated outputs (#) 1 Switching frequency (Max) (kHz) 750 Switching frequency (Min) (kHz) 550 Switching frequency (Typ) (kHz) 600 Duty cycle (Max) (%) 100 Topology Buck open-in-new Find other Buck modules (integrated inductor)

Package | Pins | Size

Surface Mount Module (BCU) 22 1067 mm² 39.62 x 26.92 Surface Mount Module (ECU) 22 1067 mm² 39.62 x 26.92 Through-Hole Module (ECT) 22 1067 mm² 39.62 x 26.92 open-in-new Find other Buck modules (integrated inductor)

Features

  • Up to 50-A output current
  • 4.5-V to 14-V input voltage
  • Wide-output voltage adjust (0.7 V to 3.6 V)
  • ±1.5% Total output voltage variation
  • Efficiencies up to 96%
  • Output overcurrent protection
    (Nonlatching, auto-reset)
  • Operating temperature: –40°C to 85°C
  • Safety agency approvals:
    • UL/IEC/CSA-C22.2 60950-1
  • Prebias start-up
  • On/off inhibit
  • Differential output voltage remote sense
  • Adjustable undervoltage lockout
  • Auto-Track™ sequencing
  • Multi-Phase, switch-mode topology
  • TurboTrans technology
  • Designed to meet ultra-fast transient
    Requirements up to 300 A/µs
  • SmartSync technology
  • Parallel operation
  • POLA™ compatible

All trademarks are the property of their respective owners.

open-in-new Find other Buck modules (integrated inductor)

Description

The PTH08T250W device is a high-performance 50-A rated, non-isolated power module. This module represents the 2nd generation of the popular PTH series power modules with a reduced footprint and improved features.

Operating from an input voltage range of 4.5 V to 14 V, the device requires a single resistor to set the output voltage to any value over the range of 0.7 V to 3.6 V. The wide input voltage range makes the this device particularly suitable for advanced computing and server applications that utilize a loosely regulated 8-V to 12-V intermediate distribution bus. Additionally, the wide input voltage range increases design flexibility by supporting operation with tightly regulated 5-V, 8-V, or 12-V intermediate bus architectures. The module incorporates a comprehensive list of features. Output overcurrent and overtemperature shutdown protects against most load faults. A differential remote sense ensures tight load regulation. An adjustable undervoltage lockout allows the turnon voltage threshold to be customized. Auto-Track sequencing is a popular feature that greatly simplifies the simultaneous power-up and power-down of multiple modules in a power system. Additionally, the capability to current share between multiple PTH08T250W modules allows for load currents greater than 50 A on a single rail.

The device includes TurboTrans and the new patent-pending SmartSync technologies. The TurboTrans feature optimizes the transient response of the regulator while simultaneously reducing the quantity of external output capacitors required to meet a target voltage deviation specification. Additionally, for a target output capacitor bank, TurboTrans technology can be used to significantly improve the regulators transient response by reducing the peak voltage deviation. SmartSync technology allows for switching frequency synchronization of multiple modules, thus simplifying EMI noise suppression tasks and reducing input capacitor RMS current requirements.

RSET is required to set the output voltage higher than 0.7 V. See the Electrical Characteristics table for more information.

Double-sided surface mount construction provides a low profile and compact footprint. Package options include both through-hole and surface mount configurations that are lead (Pb)-free and RoHS compatible.

open-in-new Find other Buck modules (integrated inductor)
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 6
Type Title Date
* Datasheet PTH08T250W 50-A, 4.5-V to 14-V Input, Non-isolated, Wide Output Adjust, Power Module with TurboTrans Technology datasheet (Rev. J) Dec. 12, 2019
Selection guides Innovative DC/DC Power Modules Selection Guide (Rev. C) Feb. 27, 2018
Application notes High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A) Aug. 13, 2009
Application notes Paralleling power modules for high-current applications Mar. 11, 2009
Application notes Q1 2009 Issue Analog Applications Journal Mar. 11, 2009
Application notes Power management for processor core voltage requirements Dec. 14, 2006

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION MODELS Download
SLTM005A.ZIP (95 KB) - PSpice Model
SIMULATION MODELS Download
SLTM006A.ZIP (50 KB) - PSpice Model
CALCULATION TOOLS Download
T2 Capacitance Calculator
T2-SW — The TurboTrans software allows the user to determine the T2 module best suited to their design parameters (Vin, Vout, Iout, Ambient Temperature, Airflow) as well as the proper amount of bulk output capacitance required to meet their transient requirements (both using TurboTrans as well as without (...)
SCHEMATICS Download
SLTR025.PDF (53 KB)
SCHEMATICS Download
SLVR361.PDF (154 KB)

Reference designs

REFERENCE DESIGNS Download
100-A Current Source Reference Design Using Two Power Modules in Parallel
TIDA-00582 A stand-alone, dual-phase power module like the Texas Instruments (TI) PTH08T250W can supply up to 50 A of output load current. However, the PTH08T250W incorporates TI's stackable controller feature that allows the outputs of multiple modules to be connected in parallel, thereby producing a reliable (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
Surface Mount Module (BCU) 22 View options
Surface Mount Module (ECU) 22 View options
Through-Hole Module (ECT) 22 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos