TPS40210-EP

ACTIVE

Enhanced Product 4.5-V to 52-V Input Current Mode Boost Controller

Top

Product details

Parameters

Vin (Min) (V) 4.5 Vin (Max) (V) 52 Vout (Min) (V) 7 Vout (Max) (V) 9 Regulated outputs (#) 1 Switching frequency (Min) (kHz) 35 Switching frequency (Max) (kHz) 1000 Iq (Typ) (mA) 0.53 Features Enable, Frequency Synchronization Duty cycle (Max) (%) 67.3 Rating HiRel Enhanced Product Operating temperature range (C) -55 to 125 open-in-new Find other Boost controllers (external switch)

Package | Pins | Size

VSON (DRC) 10 9 mm² 3 x 3 open-in-new Find other Boost controllers (external switch)

Features

  • For Boost, Flyback, SEPIC, LED Drive Apps
  • Wide Input Operating Voltage: 4.5 V to 52 V
  • Adjustable Oscillator Frequency
  • Fixed Frequency Current Mode Control
  • Internal Slope Compensation
  • Integrated Low-Side Driver
  • Programmable Closed-Loop Soft-Start
  • Overcurrent Protection
  • External Synchronization Capable
  • Reference 700 mV
  • Low Current Disable Function
open-in-new Find other Boost controllers (external switch)

Description

The TPS40210-EP is a wide-input voltage (4.5 to 52 V), nonsynchronous boost controller. The device is suitable for topologies which require a grounded source N-channel FET including boost, flyback, SEPIC, and various LED driver applications. The device features include programmable soft-start, overcurrent protection with automatic retry, and programmable oscillator frequency. Current mode control provides improved transient response and simplified loop compensation.

open-in-new Find other Boost controllers (external switch)
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TPS40210-EP 4.5-V to 52-V Input Current Mode Boost Controller datasheet Nov. 02, 2015
* Radiation & reliability report TPS40210MDRCTEP Reliability Report Feb. 16, 2016
Technical article How to add overvoltage protection to a synchronous boost controller Sep. 17, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
49
Description
The TPS40210EVM evaluation module (EVM) is a fixed frequency (600kHz) non-synchronous boost converter providing fixed 24.0-V output at up to 2A from a 12V input bus. The EVM is designed to start up from a single supply, so no additional bias voltage is required for start-up. The module uses the (...)
Features
  • 12V +10% / -20% input range
  • 24.0V fixed output voltage, adjustable with resistor change (May require compensation adjustment)
  • 2-Adc Steady State Output Current
  • 600kHz switching frequency Single SO-8 switching MOSFET and Rectifier Diode.
  • Double Sided 2 Active Layer PCB with all components on top side (...)

Design tools & simulation

SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
VSON (DRC) 10 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos