Product details

Vin (Min) (V) 2 Vin (Max) (V) 18 Vout (Min) (V) 4.5 Vout (Max) (V) 18 Switch current limit (Typ) (A) 16 Regulated outputs (#) 1 Switching frequency (Min) (kHz) 440 Switching frequency (Max) (kHz) 600 Iq (Typ) (mA) 0.12 Features Enable, Light Load Efficiency, Synchronous Rectification Duty cycle (Max) (%) 94 Rating Catalog
Vin (Min) (V) 2 Vin (Max) (V) 18 Vout (Min) (V) 4.5 Vout (Max) (V) 18 Switch current limit (Typ) (A) 16 Regulated outputs (#) 1 Switching frequency (Min) (kHz) 440 Switching frequency (Max) (kHz) 600 Iq (Typ) (mA) 0.12 Features Enable, Light Load Efficiency, Synchronous Rectification Duty cycle (Max) (%) 94 Rating Catalog
VQFN-HR (RQQ) 11 8 mm² 3 x 2.5
  • 2.5-mm × 3.0-mm QFN package with HotRod™ Lite option
    • TPS61288 HotRod
    • TPS61288L HotRod Lite
    • TPS61288L is recommended with thermal improvement
  • Wide input voltage and output voltage range
    • VIN : 2.0 V to 18 V
    • 2.4-V Minimum input voltage for start-up
    • VOUT : 4.5 V to 18 V
  • High efficiency and power capability
    • 15-A peak switch current limit
    • Two 6.5-mΩ (LS) / 8.5-mΩ (HS) MOSFETs
    • Switching frequency: 500 kHz
    • Up to 94.7% efficiency at VIN = 3.6 V, VOUT = 13 V, and IOUT = 2 A
    • Up to 96.9% efficiency at VIN = 7.2 V, VOUT = 16 V, and IOUT = 2.5 A
  • Extend the system operating time
    • Typical 110-µA quiescent current into VOUT pin
    • Maximum 2.1-µA current into VIN pin during shutdown
    • Smooth on-time/off-time (SOO) modulation at light load and low duty cycle and no DC offset between PFM and PWM

  • Rich protection
    • Output overvoltage protection at 19 V
    • Cycle-by-cycle overcurrent protection
    • Thermal shutdown
  • 2.5-mm × 3.0-mm QFN package with HotRod™ Lite option
    • TPS61288 HotRod
    • TPS61288L HotRod Lite
    • TPS61288L is recommended with thermal improvement
  • Wide input voltage and output voltage range
    • VIN : 2.0 V to 18 V
    • 2.4-V Minimum input voltage for start-up
    • VOUT : 4.5 V to 18 V
  • High efficiency and power capability
    • 15-A peak switch current limit
    • Two 6.5-mΩ (LS) / 8.5-mΩ (HS) MOSFETs
    • Switching frequency: 500 kHz
    • Up to 94.7% efficiency at VIN = 3.6 V, VOUT = 13 V, and IOUT = 2 A
    • Up to 96.9% efficiency at VIN = 7.2 V, VOUT = 16 V, and IOUT = 2.5 A
  • Extend the system operating time
    • Typical 110-µA quiescent current into VOUT pin
    • Maximum 2.1-µA current into VIN pin during shutdown
    • Smooth on-time/off-time (SOO) modulation at light load and low duty cycle and no DC offset between PFM and PWM

  • Rich protection
    • Output overvoltage protection at 19 V
    • Cycle-by-cycle overcurrent protection
    • Thermal shutdown

The TPS61288 is a high-power density, fully-integrated synchronous boost converter with a 6.5-mΩ power switch and a 8.5-mΩ rectifier switch to provide a high efficiency and small size solution in portable systems. The TPS61288 has a wide input voltage range from 2 V (2.4 V rising) to 18 V to support applications with single-cell or two-cell Lithium batteries. The device has 15-A switch current capability and is capable of providing an output voltage up to 18 V.

The TPS61288 employs peak current control topology with SOO modulation to regulate the output voltage. The device operates in the pulse width modulation (PWM) mode in moderate to heavy load condition. It automatically runs in the pulse frequency modulation (PFM) mode in light load and low duty cycle condition. SOO modulation realizes accurate regulation over wide load/VIN range while maintaining high efficiency and low output ripple. The switching frequency in the PWM mode is 500 kHz. The TPS61288 provides 19-V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.

The TPS61288 is available in a 2.5-mm × 3.0-mm QFN package.

The TPS61288 is a high-power density, fully-integrated synchronous boost converter with a 6.5-mΩ power switch and a 8.5-mΩ rectifier switch to provide a high efficiency and small size solution in portable systems. The TPS61288 has a wide input voltage range from 2 V (2.4 V rising) to 18 V to support applications with single-cell or two-cell Lithium batteries. The device has 15-A switch current capability and is capable of providing an output voltage up to 18 V.

The TPS61288 employs peak current control topology with SOO modulation to regulate the output voltage. The device operates in the pulse width modulation (PWM) mode in moderate to heavy load condition. It automatically runs in the pulse frequency modulation (PFM) mode in light load and low duty cycle condition. SOO modulation realizes accurate regulation over wide load/VIN range while maintaining high efficiency and low output ripple. The switching frequency in the PWM mode is 500 kHz. The TPS61288 provides 19-V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.

The TPS61288 is available in a 2.5-mm × 3.0-mm QFN package.

Download

Similar products you might be interested in

Similar functionality to the compared device.
LM5155 ACTIVE 2.2-MHz wide VIN, 1.5-A MOSFET driver, non-synchronous boost controller Provides higher power than TPS61288

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TPS61288 18-V, 15-A, Fully Integrated Synchronous Boost Converter datasheet (Rev. C) PDF | HTML 29 Mar 2022
Test report 3.3-V to 4.2-V Input, 12-V, 60-W Peak Output Power Boost Converter Ref. Des. PDF | HTML 26 Aug 2022
Application note Using External Bias to Broaden Input Voltage Range of Boost Converters PDF | HTML 08 Nov 2021
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 Feb 2021
EVM User's guide TPS61288EVM-064 Evaluation Module User's Guide (Rev. A) PDF | HTML 19 Nov 2020
Certificate TPS61288EVM-064 EU Declaration of Conformity (DoC) 31 Jul 2020
Application note Output Short-Circuit Protection Solution for the TPS61088 22 Sep 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS61288EVM-064 — Evaluation module for TPS61288 18 V, 15-A switch current synch boost

The TPS61288 is an 18-V, 15-A synchronous boost converter. The TPS61288 integrates two low on resistance power FETs: A 6.5-mΩ switching FET and an 8.5-mΩ rectifier FET.

The wide input voltage ranging from 2.0 V (2.4 V rising) to 18 V supports the typical applications powered by the single-cell (...)

Not available on TI.com
Simulation model

TPS61288 PSPICE Model

SLVMDH8.ZIP (187 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Calculation tool

TPS61288 Design Calculation V1.0

SLVRBH4.ZIP (1295 KB)
Reference designs

PMP40909 — 3.3-V to 4.2-V input, 12-V, 60-W peak output power boost converter reference design

This reference design demonstrates two methods that connect two TPS61288 devices in parallel to support high-output power. One method is to connect the VIN, VOUT, FB and COMP pins together directly. Because the two devices share the same voltage on the COMP pin, the inductor peak current of the two (...)
Package Pins Download
VQFN-HR (RQQ) 11 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos