TPS3840

ACTIVE

Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay

Product details

Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 1.6, 1.7, 1.8, 1.9, 2, 2.1, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 4, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.8, 4.9 Features Manual reset capable, Reset time delay, Undervoltage, Undervoltage monitor only, Wide input voltage Reset threshold accuracy (%) 1.5 Iq (typ) (mA) 0.0003 Output driver type/reset output Active-high, Active-low, Open-drain, Push-Pull Time delay (ms) 0, 0.05 Supply voltage (min) (V) 1.5 Supply voltage (max) (V) 10 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 125
Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 1.6, 1.7, 1.8, 1.9, 2, 2.1, 2.2, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3, 3.1, 3.3, 3.4, 3.5, 3.6, 4, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.8, 4.9 Features Manual reset capable, Reset time delay, Undervoltage, Undervoltage monitor only, Wide input voltage Reset threshold accuracy (%) 1.5 Iq (typ) (mA) 0.0003 Output driver type/reset output Active-high, Active-low, Open-drain, Push-Pull Time delay (ms) 0, 0.05 Supply voltage (min) (V) 1.5 Supply voltage (max) (V) 10 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Wide operating voltage: 1.5 V to 10 V
  • Nano supply current: 300 nA (Typ), 700 nA (Max)
  • Fixed threshold voltage (VIT-)
    • Threshold from 1.6 V to 4.9 V in 0.1-V steps
    • High accuracy: 1% (Typ), 1.5% (Max)
    • Built-in hysteresis (VIT+)
      • 1.6 V < VIT- ≤ 3.0 V = 100 mV (Typical)
      • 3.1 V ≤ VIT- < 4.9 V = 200 mV (Typical)
  • Start-up delay (tSTRT): 220 µs (Typ), 350 µs (Max)
    • Programmable reset time delay (tD):
      • 50 µs (no capacitor) to 6.2 s (10-µF)
    • Active-low manual reset (MR)
    • Three output topologies:
      • TPS3840DL: open-drain, active-low (RESET), requires pull-up resistor
      • TPS3840PL: push-pull, active-low (RESET)
      • TPS3840PH: push-pull, active-high (RESET)
    • Wide temperature range: –40°C to +125°C
    • Package: SOT23-5 (DBV)
    • Wide operating voltage: 1.5 V to 10 V
    • Nano supply current: 300 nA (Typ), 700 nA (Max)
    • Fixed threshold voltage (VIT-)
      • Threshold from 1.6 V to 4.9 V in 0.1-V steps
      • High accuracy: 1% (Typ), 1.5% (Max)
      • Built-in hysteresis (VIT+)
        • 1.6 V < VIT- ≤ 3.0 V = 100 mV (Typical)
        • 3.1 V ≤ VIT- < 4.9 V = 200 mV (Typical)
    • Start-up delay (tSTRT): 220 µs (Typ), 350 µs (Max)
      • Programmable reset time delay (tD):
        • 50 µs (no capacitor) to 6.2 s (10-µF)
      • Active-low manual reset (MR)
      • Three output topologies:
        • TPS3840DL: open-drain, active-low (RESET), requires pull-up resistor
        • TPS3840PL: push-pull, active-low (RESET)
        • TPS3840PH: push-pull, active-high (RESET)
      • Wide temperature range: –40°C to +125°C
      • Package: SOT23-5 (DBV)

      Wide Vin allows monitoring 9V rails or batteries without external components and 24V rails with external resistors. Nano-Iq extends battery life for low power applications and minimizes current consumption when using external resistors. Fast start-up delay allows the detection of a voltage fault before the rest of the system powers up providing maximum safety in hazardous start-up fault conditions. Low Power-on-Reset (VPOR) prevents false resets, premature enable or turn-on of next device, and proper transistor control during power-up and power-down.

      Reset output signal is asserted when the voltage at VDD drops below the negative voltage threshold (VIT-) or when manual reset (MR) is pulled to a low logic (VMR_L). Reset signal is cleared when VDD rise above VIT- plus hysteresis (VIT+) and manual reset is floating or above VMR_H and the reset time delay (tD) expires. Reset time delay can be programmed by connecting a capacitor between CT pin and ground. For a fast reset CT pin can be left floating.

      Additional features: Built-in glitch immunity protection for MR and VDD, built-in hysteresis, low open-drain output leakage current (ILKG(OD)).












      Wide Vin allows monitoring 9V rails or batteries without external components and 24V rails with external resistors. Nano-Iq extends battery life for low power applications and minimizes current consumption when using external resistors. Fast start-up delay allows the detection of a voltage fault before the rest of the system powers up providing maximum safety in hazardous start-up fault conditions. Low Power-on-Reset (VPOR) prevents false resets, premature enable or turn-on of next device, and proper transistor control during power-up and power-down.

      Reset output signal is asserted when the voltage at VDD drops below the negative voltage threshold (VIT-) or when manual reset (MR) is pulled to a low logic (VMR_L). Reset signal is cleared when VDD rise above VIT- plus hysteresis (VIT+) and manual reset is floating or above VMR_H and the reset time delay (tD) expires. Reset time delay can be programmed by connecting a capacitor between CT pin and ground. For a fast reset CT pin can be left floating.

      Additional features: Built-in glitch immunity protection for MR and VDD, built-in hysteresis, low open-drain output leakage current (ILKG(OD)).












      Download View video with transcript Video

      Similar products you might be interested in

      open-in-new Compare alternates
      Pin-for-pin with same functionality to the compared device
      TLV840 ACTIVE Low-voltage supervisor with adjustable-reset time delay and manual reset Enhanced accuracy (0.5%) and lower quiescent current (120 nA) with wider range of threshold options 0.8 V to 5.4 V

      Technical documentation

      star =Top documentation for this product selected by TI
      No results found. Please clear your search and try again.
      View all 18
      Type Title Date
      * Data sheet TPS3840 Nano Power, High Input Voltage Supervisor With MR and Programmable Delay datasheet (Rev. D) PDF | HTML 29 Jan 2020
      Functional safety information TPS3840 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 13 Nov 2023
      White paper 克服低功耗應用中的低 IQ 挑戰 (Rev. B) PDF | HTML 19 Apr 2023
      White paper 저전력 애플리케이션의 저 IQ 문제점 극복 (Rev. B) PDF | HTML 19 Apr 2023
      White paper Overcoming Low-IQ Challenges in Low-Power Applications (Rev. B) PDF | HTML 12 Apr 2023
      Application brief Using Voltage Supervisors in High Voltage Applications (Rev. B) PDF | HTML 20 Feb 2023
      Application note Camera Module Shutdown Power Sequence Solution PDF | HTML 25 Apr 2022
      EVM User's guide TPS3840EVM Voltage Supervisor User's Guide (Rev. A) 13 May 2021
      Application note Back-up Power Supply Switchover with Supply Voltage Supervisor & Power & Power M 09 Apr 2020
      E-book Ein Techniker-Leitfaden für Industrieroboter-Designs 25 Mar 2020
      Application note Voltage Supervisors (Reset ICs): Frequently Asked Questions (FAQs) (Rev. A) 17 Mar 2020
      Application note Programmable Push-Button, Pulse Detector, and Pulse Generator Solutions 10 Mar 2020
      E-book E-book: An engineer’s guide to industrial robot designs 12 Feb 2020
      E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 28 Jun 2019
      Application note Comparing Voltage and Processor Monitoring Solutions 05 Apr 2019
      Technical article Voltage supervisor requirements for e-meter applications PDF | HTML 18 Jan 2019
      Technical article Improve circuit breaker leakage current response with a voltage supervisor PDF | HTML 10 Jan 2019
      Application brief Mitigating the Voltage Glitch on the Output of a Voltage Supervisor (Reset IC) D 27 Jun 2018

      Design & development

      For additional terms or required resources, click any title below to view the detail page where available.

      Evaluation board

      TPS3840EVM — TPS3840 nanopower high-input voltage supervisor evaluation module

      The TPS3840 evaluation module (EVM)  is a platform for evaluating the TPS3840 device, which is a nanopower voltage supervisor with manual reset and programmable reset delay. TPS3840 offers operation up to 10 V, while maintaining very-low quiescent current of 350 nA (typ) in addition to 1% (...)

      User guide: PDF
      Not available on TI.com
      Simulation model

      TPS3840DL16 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS9.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840DL26 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS7.ZIP (97 KB) - PSpice Model
      Simulation model

      TPS3840DL27 PSpice Transient Model

      SNVMBN6.ZIP (51 KB) - PSpice Model
      Simulation model

      TPS3840DL27 Unencrypted PSpice Transient Model

      SNVMBN8.ZIP (2 KB) - PSpice Model
      Simulation model

      TPS3840DL28 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBR7.ZIP (97 KB) - PSpice Model
      Simulation model

      TPS3840DL29 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS0.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840DL30 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBR9.ZIP (97 KB) - PSpice Model
      Simulation model

      TPS3840DL33 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS1.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840DL37 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS5.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840DL41 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS4.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840DL42 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS6.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840DL44 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS3.ZIP (107 KB) - PSpice Model
      Simulation model

      TPS3840DL45 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBS2.ZIP (106 KB) - PSpice Model
      Simulation model

      TPS3840PH30 PSpice Transient Model

      SNVMBN9.ZIP (52 KB) - PSpice Model
      Simulation model

      TPS3840PH30 Unencrypted PSpice Transient Model

      SNVMBN4.ZIP (2 KB) - PSpice Model
      Simulation model

      TPS3840PL25 PSPICE TRANSIENT UNENCRYPTED MODEL

      SNVMBR8.ZIP (98 KB) - PSpice Model
      Simulation model

      TPS3840PL28 PSpice Transient Model

      SNVMBN5.ZIP (51 KB) - PSpice Model
      Simulation model

      TPS3840PL28 Unencrypted PSpice Transient Model

      SNVMBN7.ZIP (2 KB) - PSpice Model
      Simulation tool

      PSPICE-FOR-TI — PSpice® for TI design and simulation tool

      PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
      Reference designs

      TIDA-010041 — Nano power, wide VIN (12 V max) supervisor reference design used as comparator or power sequencer

      This reference design highlights a versatile use case for a low-power reset IC and a watchdog timer. With less than 1-µA current consumption, the TPS3840 device can be configured to work either as a comparator (with simple 3-pin configuration) or as a universal power supply supervisor that (...)
      Design guide: PDF
      Schematic: PDF
      Reference designs

      TIDA-010243 — Three-phase current transformer e-meter reference design with standalone ADC

      This reference design implements Class 0.1 three-phase energy measurement using a high-performance, multichannel analog-to-digital converter (ADC), which samples current transformers (CT) at 8 kHz to measure the current and voltage of each leg of the AC mains. This reference design achieves high (...)
      Design guide: PDF
      Reference designs

      TIDA-010036 — One-phase shunt electricity meter reference design using standalone ADCs

      This reference design implements Class 0.5 single-phase energy measurement using standalone multi-channel analog-to-digital converters (ADC) to sample a shunt current sensor. With the combination of the shunt sensor and a compact magnetically immune power supply, the design provides protection (...)
      Design guide: PDF
      Schematic: PDF
      Reference designs

      TIDA-010037 — High accuracy split-phase CT electricity meter reference design using standalone ADCs

      This reference design implements Class 0.1 split-phase energy measurement using high-performance, multi-channel analog-to-digital converters (ADC). The independent ADC samples the output of current transformers (CT) at 8 kHz to measure the current and voltage of each leg of the AC mains. The (...)
      Design guide: PDF
      Schematic: PDF
      Reference designs

      TIDA-010055 — Non-isolated power architecture with diagnostics reference design for protection relay modules

      This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
      Design guide: PDF
      Schematic: PDF
      Package Pins CAD symbols, footprints & 3D models
      SOT-23 (DBV) 5 Ultra Librarian

      Ordering & quality

      Information included:
      • RoHS
      • REACH
      • Device marking
      • Lead finish/Ball material
      • MSL rating/Peak reflow
      • MTBF/FIT estimates
      • Material content
      • Qualification summary
      • Ongoing reliability monitoring
      Information included:
      • Fab location
      • Assembly location

      Support & training

      TI E2E™ forums with technical support from TI engineers

      Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

      If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

      Videos