TPS560430

ACTIVE

SIMPLE SWITCHER® 36-V, 600-mA Buck Regulator With High-Efficiency Sleep Mode

Top

Product details

Parameters

Vin (Min) (V) 4 Vin (Max) (V) 36 Vout (Min) (V) 1 Vout (Max) (V) 24 Iout (Max) (A) 0.6 Iq (Typ) (mA) 0.08 Switching frequency (Min) (kHz) 1100 Switching frequency (Max) (kHz) 2100 Features Enable, Forced PWM, Light Load Efficiency, Over Current Protection, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Adjustable, Soft Start Fixed Operating temperature range (C) -40 to 125 Rating Catalog Regulated outputs (#) 1 open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

SOT-23 (DBV) 6 5 mm² 2.9 x 1.6 open-in-new Find other Buck converters (integrated switch)

Features

  • Configured for Rugged Industrial Applications
    • Input Voltage Range: 4 V to 36 V
    • 600-mA Continuous Output Current
    • Minimum Switching-On Time: 60 ns
    • 98% Maximum Duty Cycle
    • Support Startup with Pre-Biased Output
    • Short Circuit Protection with Hiccup Mode
    • ±1.5% Tolerance Voltage Reference over Temperature from –40°C to 125°C
    • Precision Enable
  • Small Solution Size and Ease of Use
    • Integrated Synchronous Rectification
    • Internal Compensation for Ease of Use
    • SOT-23-6 Package
  • Various Options in Pin-to-Pin Compatible Package
    • 1.1-MHz and 2.1-MHz Frequency Options
    • PFM and Forced PWM (FPWM) Options
    • Fixed 3.3-V Output Option
  • Create a Custom Design Using the TPS560430 With the WEBENCH® Power Designer

All trademarks are the property of their respective owners.

open-in-new Find other Buck converters (integrated switch)

Description

The TPS560430 is an easy to use synchronous step-down DC-DC converter capable of driving up to 600-mA load current. With a wide input range of 4 V to 36 V, the device is suitable for a wide range of applications from industrial to automotive for power conditioning from an unregulated source.

The TPS560430 has 1.1-MHz and 2.1-MHz operating frequency versions for either high efficiency or small solution size. The TPS560430 also has FPWM (forced PWM) version to achieve constant frequency and small output voltage ripple over the full load range. Soft-start and compensation circuits are implemented internally which allows the device to be used with minimum external components.

The device has built-in protection features, such as cycle-by-cycle current limit, hiccup mode short-circuit protection, and thermal shutdown in case of excessive power dissipation. The TPS560430 is available in SOT-23-6 package.

open-in-new Find other Buck converters (integrated switch)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 8
Type Title Date
* Datasheet TPS560430 SIMPLE SWITCHER 4-V to 36-V, 600-mA Synchronous Step-Down Converter datasheet (Rev. B) Jun. 11, 2018
Application notes 16-Bit 8-Channel PLC Analog Input Module with High Voltage (±150 V) Common Mode Apr. 27, 2020
Application notes L1 and L2 EV Charger Electric Vehicle Service Equipment Design Considerations (Rev. A) Apr. 14, 2020
Application notes Simple Solution for EMI Filter Stability Issue in DC/DC Converters (Rev. A) Apr. 25, 2019
Application notes Loop Response Considerations in Peak Current Mode Buck Converter Design (Rev. A) Apr. 02, 2019
Technical articles Minimize the impact of the MLCC shortage on your power application Mar. 29, 2019
Application notes Create an Inverting Power Supply Using Peak Current Mode Buck Converter Jul. 20, 2018
User guides Using the TPS560430EVM May 03, 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
49
Description
The TPS560430XFEVM is a fully assembled and tested circuit for evaluating the TPS560430 series step-down converters. The TPS560430XFEVM operates from 4V to 36V input (12V nominal) and provides a 5.0V output at 600mA. The board has a jumper connector to enable or disable the converter operation. The (...)
Features
  • 4V to 36V Input Voltage Range
  • Accurate 5V Output
  • Up to 600mA Output Current
  • Switching Frequency 1.1MHz

Design tools & simulation

SIMULATION MODELS Download
SLUM621.ZIP (105 KB) - PSpice Model
SIMULATION MODELS Download
SLUM625.ZIP (95 KB) - PSpice Model
SIMULATION MODELS Download
SLUM631.ZIP (99 KB) - PSpice Model
SIMULATION MODELS Download
SLUM635.ZIP (93 KB) - PSpice Model
SIMULATION MODELS Download
SLUM639A.ZIP (123 KB) - PSpice Model
SIMULATION MODELS Download
SLUM702.TSC (251 KB) - TINA-TI Spice Model
SIMULATION MODELS Download
SLUM703.TSC (710 KB) - TINA-TI Spice Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

Reference designs

REFERENCE DESIGNS Download
>95% Efficiency, 1-kW analog control AC/DC reference design for 5G telecom rectifier
TIDA-010081 — This compact, high efficiency reference design with a 54-V DC, 1000-W output targets 5G telecom power and industrial AC/DC power supplies. The circuit consists of a front-end continuous conduction mode (CCM) power factor correction (PFC) circuit based on the UCC28180, followed by a robust LLC stage (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
1-kW, 80 Plus titanium, GaN CCM totem pole bridgeless PFC and half-bridge LLC reference design
TIDA-010062 This reference design is a digitally controlled, compact 1-kW AC/DC power supply design for server power supply unit (PSU) and telecom rectifier applications. The highly efficient design supports two main power stages, including a front-end continuous conduction (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Protected DC-bus input power and control power supply reference design for low-voltage servo drives
TIDA-010070 — This reference design uses an ORing controller, the LM5050-1 to provide protection against reverse polarity and reverse current. In conjunction, the LM5069 hot swap controller is used for overcurrent, over voltage, under voltage protection, and inrush current limitation. The design also features (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Smart meter PLC module backup power supply reference design
TIDA-050033 — The TIDA-050033 reference design demonstrates the backup power supply solution for smart meter PLC module. By using a cost-effective boost converter TLV61048, minimum operating voltage is extended to maximize super capacitor usage rate. Smaller size (lower capacitance) super capacitor could be (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Non-isolated power architecture with diagnostics reference design for protection relay modules
TIDA-010055 — This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
13-V to 36-V in, 12-V 125-mA output power module reference design with 0.1% output voltage ripple
PMP40436 — This e-meter applications reference design implements a synchronous buck converter TPS560430 with high efficiency. The efficiency is up to 91.8% at 18-V input and 125-mA output. The output voltage ripple is less than 0.1% of output voltage. The design is available in a compact form factor with 16 mm (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
1 Phase AC Input, 5W 4 Rail Outputs Reference Design for E-meter
PMP40381 — The reference design was designed for the 1 phase smart meter application. It uses the UCC28600 quasi-resonant flyback controller to generate four 3KV isolated output rails from an extremely wide input source from 85VAC to 300VAC. The four output rails have independent protections to improve system (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
3 Phase AC Input, 12W Output Reference Design for E-meter
PMP40347 — This reference design was designed for the 3 Phase E-meter application. It uses the UCC28600 quasi-resonant flyback controller to generate three 3KV isolated output rails from an extremely wide input source from 110VAC to 420VAC. The 3 output rails have independent protections to improve system (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOT-23 (DBV) 6 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos