TPS62240

ACTIVE

2.25MHz 300mA Step-Down Converter in 2x2mm SON/TSOT23 Package

Top

Product details

Parameters

Vin (Min) (V) 2 Vin (Max) (V) 6 Vout (Min) (V) 0.6 Vout (Max) (V) 6 Iout (Max) (A) 0.3 Iq (Typ) (uA) 15 Switching frequency (Min) (kHz) 2000 Switching frequency (Max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Synchronous Rectification Operating temperature range (C) -40 to 85 Rating Catalog Regulated outputs (#) 1 open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

SOT-23-THN (DDC) 5 8 mm² 2.9 x 2.8 WSON (DRV) 6 4 mm² 2 x 2 open-in-new Find other Buck converters (integrated switch)

Features

  • High Efficiency - Greater Than 94%
  • Output Current up to 300 mA
  • VIN Range from 2 V to 6 V for Li-ion Batteries With
    Extended Voltage Range
  • 2.25-MHz Fixed-Frequency Operation
  • Power Save Mode at Light Load Currents
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Adjustable Output Voltage from 0.6 V to VIN
  • Typical 15-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Available in a SOT (5) and 2-mm × 2-mm × 0.8-
    mm WSON (6) Package
  • Allows <1-mm Solution Height
open-in-new Find other Buck converters (integrated switch)

Description

The TPS6224x device is a highly efficient synchronous step-down DC-DC converter. The device provides up to 300-mA output current from a single Li-Ion cell and is ideal for battery powered portable applications like mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline, 3.3-V and 5-V input voltage rails.

The TPS6224x operates at 2.25-MHz fixed switching frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low output voltage ripple. For low-noise applications, the device can be forced into fixed-frequency pulse width modulation (PWM) mode by pulling the MODE pin high. In shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6224x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6224x operates over a free-air temperature range of –40°C to 85°C. The device is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

open-in-new Find other Buck converters (integrated switch)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 18
Type Title Date
* Datasheet TPS6224x 2.25-MHz 300-mA Step-Down Converter in 2 x 2 WSON and SOT Package datasheet (Rev. C) Jul. 31, 2015
Application note Methods of output-voltage adjustment for DC/DC converters Jun. 14, 2019
Technical articles Minimize the impact of the MLCC shortage on your power application Mar. 29, 2019
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) Dec. 11, 2018
Application note QFN and SON PCB Attachment (Rev. B) Aug. 24, 2018
Selection guide Power Management Guide 2018 (Rev. R) Jun. 25, 2018
Application note Understanding 100% mode in low-power DC/DC converters Jun. 22, 2018
Application note A Topical Index of TI Low Power Buck DC/DC Application Notes Jan. 17, 2018
Application note Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) Nov. 29, 2017
Application note Achieving a clean startup by using a DC/DC converter with a precise enable-pin t Oct. 24, 2017
Application note Extending the Soft Start Time Without a Soft Start Pin (Rev. B) Jun. 15, 2017
Application note Testing tips for applying external power to supply outputs without an input volt Oct. 24, 2016
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) Aug. 17, 2015
Application note Five steps to a great PCB layout for a step-down converter Jan. 29, 2015
Application note Design considerations for a resistive feedback divider in a DC/DC converter Apr. 26, 2012
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) Jan. 13, 2012
Application note IQ: What it is, what it isn’t, and how to use it Jun. 17, 2011
User guide TPS622x0EVM-229 Jul. 26, 2007

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description
The TPS62240EVM-229 facilitates evaluation of the TPS62240 2.25 MHz, 300 mA Step-Down DC-DC Converter.
Features
  • High Efficiency Step Down Converter
  • Output Current up to 300 mA
  • VIN Range From 2.0 V to 6 V for Li-Ion Batteries with Extended Voltage Range
  • 2.25 MHz Fixed Frequency Operation
  • Power Save Mode at Light Load Currents
  • Output Voltage Accuracy in PWM Mode ±1%
  • Adjustable Output Voltage from 0.6 V to VIN
  • Typical (...)
EVALUATION BOARD Download
19
Description

The TPS62260LED-338 evaluation module controls the color and brightness of a lamp or runs an automatic color light animation program. The color is generated by three LEDs (red, green and blue). An MSP430 ultra-low power microcontroller controls the brightness of each LED with constant current (...)

Features
  • 2 V to 6 V Supply Voltage Range
  • Output Current up to 600 mA
  • 2.25 MHz Fixed Frequency Operation
  • Power Save Mode at Light Load Currents
  • Typ. 15 μA Quiescent Current
  • Soft Start
  • Voltage Positioning at Light Loads

Design tools & simulation

SIMULATION MODEL Download
SLIM061A.ZIP (37 KB) - PSpice Model
SIMULATION MODEL Download
SLVM252.TSC (830 KB) - TINA-TI Reference Design
SIMULATION MODEL Download
SLVM253.ZIP (35 KB) - TINA-TI Spice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
GERBER FILE Download
SLVC134.ZIP (106 KB)
GERBER FILE Download
SLVC780.ZIP (138 KB)

Reference designs

REFERENCE DESIGNS Download
3-ph E-Meter. Input voltage: 2 and 3 phase; outputs: 16.5V@300mApk, 12V@500mA, 3.3V@100mApk, 1.9V@15
PMP7146 — The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and (...)
Design files

CAD/CAE symbols

Package Pins Download
SOT-23-THIN (DDC) 5 View options
WSON (DRV) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos