3-V to 17-V, 3-A, high-efficiency and low IQ buck converter 1.5-mm × 2-mm QFN package
Product details
Parameters
Features
- High efficiency for wide duty cycle and load range
- IQ: 4-µA typical
- Selectable switching frequency: 2.5 MHz and 1.0 MHz
- RDS(ON): 62-mΩ high side, 22-mΩ low side
- Automatic efficiency enhancement (AEE)
- Small 1.5-mm × 2.0-mm VQFN package with 0.5-mm pitch
- Up to 3-A continuous output current
- ±0.9% feedback voltage accuracy across temp (-40°C to 150°C)
- Configurable ouput voltage options:
- VFB external divider: 0.6 V to 5.5 V
- VSET internal divider: 16 options between 0.4 V and 5.5 V
- DCS-Control™ topology with 100% mode
- Highly flexible and easy to use
- Optimized pinout for single-layer routing
- Precise enable input
- Forced PWM or auto power save mode
- Power good output
- Selectable active output discharge
- Adjustable soft start and tracking
- No external bootstrap capacitor required
- Create a custom design using the TPS62903 using the WEBENCH Power Designer
All trademarks are the property of their respective owners.
Description
The TPS62903 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ± 1% with the DCS-Control topology. The wide input voltage range of 3 V to 17 V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.
The TPS62903 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/Smart-CONF input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.
The device is available in small 9-pin VQFN package measuring 1.50 mm × 2.00 mm with 0.5-mm pitch.
Same functionality but is not pin-for-pin or parametrically equivalent to the compared device:
Technical documentation
Type | Title | Date | |
---|---|---|---|
* | Datasheet | TPS62903, 3-V to 17-V, High Efficiency and Low IQ Buck Converter in 1.5-mm × 2-mm QFN Package datasheet (Rev. A) | Mar. 18, 2021 |
More literature | TPS62903EVM-069 EU RoHS Declaration of Conformity (DoC) | Dec. 15, 2020 | |
Technical article | Minimize the impact of the MLCC shortage on your power application | Mar. 29, 2019 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Hardware development
Description
Features
- 4 µA IQ
- 1.5-mm x 2-mm QFN package
- 17-V input voltage range
- 1.2-V output voltage
- 3-A output current
Design tools & simulation
Features
- Leverages Cadence PSpice Technology
- Preinstalled library with a suite of digital models to enable worst-case timing analysis
- Dynamic updates ensure you have access to most current device models
- Optimized for simulation speed without loss of accuracy
- Supports simultaneous analysis of multiple products
- (...)
CAD/CAE symbols
Package | Pins | Download |
---|---|---|
(RPJ) | 9 | View options |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.