홈 증폭기 완전 차동 증폭기
홈
증폭기
완전 차동 증폭기

LMH6554

활성

2.8 GHz 초선형 완전 차동 증폭기

지금 주문하기
데이터 시트

LMH6554

활성
지금 주문하기

제품 상세 정보

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 BW at Acl (MHz) 2800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6200 Architecture Bipolar, Current FB, Fully Differential ADC Driver Vn at flatband (typ) (nV√Hz) 0.9 Iq per channel (typ) (mA) 52 Rail-to-rail No Vos (offset voltage at 25°C) (max) (mV) 3 Operating temperature range (°C) -40 to 125 Iout (typ) (mA) 150 2nd harmonic (dBc) 68 3rd harmonic (dBc) 70 Frequency of harmonic distortion measurement (MHz) 250 GBW (typ) (MHz) 2500 Input bias current (max) (pA) 8000000 Features Shutdown CMRR (typ) (dB) 83 Rating Catalog
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 5.25 BW at Acl (MHz) 2800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6200 Architecture Bipolar, Current FB, Fully Differential ADC Driver Vn at flatband (typ) (nV√Hz) 0.9 Iq per channel (typ) (mA) 52 Rail-to-rail No Vos (offset voltage at 25°C) (max) (mV) 3 Operating temperature range (°C) -40 to 125 Iout (typ) (mA) 150 2nd harmonic (dBc) 68 3rd harmonic (dBc) 70 Frequency of harmonic distortion measurement (MHz) 250 GBW (typ) (MHz) 2500 Input bias current (max) (pA) 8000000 Features Shutdown CMRR (typ) (dB) 83 Rating Catalog
UQFN (NHJ) 14 6.25 mm² (2.5 mm × 2.5 mm)
  • Small-Signal Bandwidth 2.8 GHz
  • 2 VPP Large-Signal Bandwidth 1.8 GHz
  • 0.1 dB Gain Flatness 830 MHz
  • OIP3 at 150 MHz 46.5 dBm
  • HD2/HD3 at 75 MHz –96 / –97 dBc
  • Input Noise Voltage 0.9 nV/√Hz
  • Input Noise Current 11 pA/√Hz
  • Slew Rate 6200 V/µs
  • Power 260 mW
  • Typical Supply Current 52 mA
  • 14-Lead UQFN Package
  • Small-Signal Bandwidth 2.8 GHz
  • 2 VPP Large-Signal Bandwidth 1.8 GHz
  • 0.1 dB Gain Flatness 830 MHz
  • OIP3 at 150 MHz 46.5 dBm
  • HD2/HD3 at 75 MHz –96 / –97 dBc
  • Input Noise Voltage 0.9 nV/√Hz
  • Input Noise Current 11 pA/√Hz
  • Slew Rate 6200 V/µs
  • Power 260 mW
  • Typical Supply Current 52 mA
  • 14-Lead UQFN Package

The LMH6554 device is a high-performance fully differential amplifier designed to provide the exceptional signal fidelity and wide large-signal bandwidth necessary for driving 8- to 16-bit high-speed data acquisition systems. Using TI’s proprietary differential current mode input stage architecture, the LMH6554 has unity gain, small-signal bandwidth of 2.8GHz and allows operation at gains greater than unity without sacrificing response flatness, bandwidth, harmonic distortion, or output noise performance.

The low-impedance differential output of the device is designed to drive ADC inputs and any intermediate filter stage. The LMH6554 delivers 16-bit linearity up to 75 MHz when driving 2V peak-to-peak into loads as low as 200 Ω.

The LMH6554 is fabricated in TI’s advanced complementary BiCMOS process and is available in a space-saving 14-lead UQFN package for higher performance.

The LMH6554 device is a high-performance fully differential amplifier designed to provide the exceptional signal fidelity and wide large-signal bandwidth necessary for driving 8- to 16-bit high-speed data acquisition systems. Using TI’s proprietary differential current mode input stage architecture, the LMH6554 has unity gain, small-signal bandwidth of 2.8GHz and allows operation at gains greater than unity without sacrificing response flatness, bandwidth, harmonic distortion, or output noise performance.

The low-impedance differential output of the device is designed to drive ADC inputs and any intermediate filter stage. The LMH6554 delivers 16-bit linearity up to 75 MHz when driving 2V peak-to-peak into loads as low as 200 Ω.

The LMH6554 is fabricated in TI’s advanced complementary BiCMOS process and is available in a space-saving 14-lead UQFN package for higher performance.
filter 기타 완전 차동 증폭기 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
15개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LMH6554 2.8-GHz Ultra Linear Fully Differential Amplifier datasheet (Rev. Q) PDF | HTML 2026. 3. 11
Application brief Why Use an FDA to Drive an ADC? PDF | HTML 2026. 1. 8
Application brief Active Filter Design for Differential ADCs (Rev. A) PDF | HTML 2025. 10. 8
Circuit design Single-ended input to differential output circuit using a fully-differential amp (Rev. A) PDF | HTML 2024. 9. 25
e북 Engineer's Guide to High-Speed Amplifiers PDF | HTML 2023. 10. 18
애플리케이션 노트 Attenuator Amplifier Design to Maximize the Input Voltage of Differential ADCs 2018. 6. 14
e북 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017. 3. 28
사용 설명서 LMH6554LE-EVAL High Speed Differential Amplifier Evaluation Board (Rev. C) 2013. 5. 1
애플리케이션 노트 AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A) 2013. 5. 1
애플리케이션 노트 AN-2177 Using the LMH6554 as a ADC Driver (Rev. A) 2013. 4. 26
애플리케이션 노트 Using High Speed Diff Amp to Drive ADCs (Rev. A) 2013. 4. 26
추가 자료 Featured High Speed Differential Amplifiers 2012. 10. 23
아날로그 디자인 학술지 Converting single-ended video to differential video in single-supply systems 2011. 9. 16
아날로그 디자인 학술지 Using single-supply fully diff. amps with neg. input voltages to drive ADCs 2010. 11. 15
애플리케이션 노트 A Walk Along the Signal Path (High-Speed Signal Path) 2005. 3. 30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMH6554LE-EVAL — LMH6554용 평가 보드

The LMH6554LE−EVAL evaluation board is designed to aid in the characterization of TI`s LMH6554 fully differential amplifier in an 14 lead LLP package. The LMH6554 is part of the LMH® high speed amplifier family. Use the evaluation board as a guide for high frequency layout and as a tool to aid (...)

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LMH6554 ADS Model

SNOJ010.ZIP (44 KB) - SPICE 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LMH6554 PSpice Model (Rev. A)

SNOM157A.ZIP (47 KB) - PSpice 모델
지원되는 제품 및 하드웨어
계산 툴

SBOR022 — TI FDA Calculator

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-00092 — 고속 ADC 가동을 위한 LMH6554 최적화

This reference design shows the ability of the high-speed amplifier, LMH6554, to perform single-ended to differential conversion to drive high-speed analog-to-digital converters (ADCs) while maintaining excellent noise and distortion performance. Performance versus input frequency is shown for both (...)

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-00093 — 고속 ADC 구동을 위한 THS4509 최적화 레퍼런스 설계

This reference design shows the ability of the high-speed amplifier, THS4509 to perform single-ended to differential conversion to drive high-speed analog-to-digital converters (ADCs) while maintaining excellent noise and distortion performance. Performance versus input frequency is shown for both (...)

지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
UQFN (NHJ) 14 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상