SLUUCP8B June 2024 – October 2026 BQ41Z50
| Class | Subclass | Name | Type | Min | Max | Default | Unit |
|---|---|---|---|---|---|---|---|
| Gas Gauging | Smoothing | Term Smooth Time | U1 | 1 | 255 | 20 | s |
Description: If the config bit [DSG_0_SMOOTH_OK] is set, then during discharge and once the pack voltage is below the threshold defined in Term Smooth Start Cell V Delta, time-based smoothing is initiated. This will smooth RemCap to 0mAh over the next Term Smooth Time seconds.
When [DSG_0_SMOOTH_PAUSE_RELAX] is disabled (default), smoothing continues through RELAX mode and the full smooth time is applied. When [DSG_0_SMOOTH_PAUSE_RELAX] is enabled, the remaining smooth time is paused during RELAX mode and resumes upon discharge current or when voltage drops below the start threshold.