Home Power management LED drivers Automotive LED drivers
Home
Power management
LED drivers
Automotive LED drivers

TPS92622-Q1

ACTIVE

Automotive, two-channel 40-V high-side LED driver with thermal sharing

Order now
Data sheet

TPS92622-Q1

ACTIVE
Data sheet Order now

Product details

Number of channels 2 Topology Current Source Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Vout (min) (V) 0 Vout (max) (V) 40 Iout (max) (A) 0.3 Iq (typ) (mA) 1.2 Features Thermal Sharing, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, PWM Dimming, Thermal shutdown
Number of channels 2 Topology Current Source Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Vout (min) (V) 0 Vout (max) (V) 40 Iout (max) (A) 0.3 Iq (typ) (mA) 1.2 Features Thermal Sharing, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, PWM Dimming, Thermal shutdown
HVSSOP (DGN) 12 19.6 mm² 4 x 4.9 WSON (DRR) 12 9 mm² 3 x 3
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, T A
  • Wide input voltage range: 4.5 V to 40 V
  • Thermal sharing by external shunt resistor
  • Low supply current in fault mode
  • Ultra low shutdown current in sleep mode (only for HVSSOP package)
  • Two high-precision current regulation:
    • Up to 150-mA current output for each channel
    • ±5% accuracy over full temperature range
    • Independent current setting by resistor
    • Independent PWM pin for brightness control
  • Low dropout voltage:
    • Maximum dropout: 350 mV for 150 mA
  • Diagnostics and protection
    • LED open-circuit with auto-recovery
    • LED short-to-GND with auto-recovery
    • Diagnostic enable with adjustable threshold
    • Fault bus configurable as either one-fails–all-fail or only-failed-channel off (N-1)
    • Thermal shutdown
  • Operation junction temperature range:–40°C to 150°C
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C, T A
  • Wide input voltage range: 4.5 V to 40 V
  • Thermal sharing by external shunt resistor
  • Low supply current in fault mode
  • Ultra low shutdown current in sleep mode (only for HVSSOP package)
  • Two high-precision current regulation:
    • Up to 150-mA current output for each channel
    • ±5% accuracy over full temperature range
    • Independent current setting by resistor
    • Independent PWM pin for brightness control
  • Low dropout voltage:
    • Maximum dropout: 350 mV for 150 mA
  • Diagnostics and protection
    • LED open-circuit with auto-recovery
    • LED short-to-GND with auto-recovery
    • Diagnostic enable with adjustable threshold
    • Fault bus configurable as either one-fails–all-fail or only-failed-channel off (N-1)
    • Thermal shutdown
  • Operation junction temperature range:–40°C to 150°C

The TPS92622-Q1 two-channel LED driver includes an unique thermal management design to reduce temperature rising on the device. The TPS92622-Q1 is a linear driver directly powered by automotive batteries with large voltage variations to output full current loads up to 150 mA per channel. External shunt resistors are leveraged to share output current and dissipate power out of the driver. The device full-diagnostic capabilities include LED open, LED short-to-GND circuit, and device overtemperature protection.

The one-fails–all-fail feature of TPS92622-Q1 can work together with other LED drivers, such as the TPS9261x-Q1, TPS9262x-Q1, TPS9263x-Q1, and TPS92830-Q1 devices, to address different requirements.

The TPS92622-Q1 two-channel LED driver includes an unique thermal management design to reduce temperature rising on the device. The TPS92622-Q1 is a linear driver directly powered by automotive batteries with large voltage variations to output full current loads up to 150 mA per channel. External shunt resistors are leveraged to share output current and dissipate power out of the driver. The device full-diagnostic capabilities include LED open, LED short-to-GND circuit, and device overtemperature protection.

The one-fails–all-fail feature of TPS92622-Q1 can work together with other LED drivers, such as the TPS9261x-Q1, TPS9262x-Q1, TPS9263x-Q1, and TPS92830-Q1 devices, to address different requirements.
open-in-new Find other Automotive LED drivers
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
TPS92620-Q1 ACTIVE Automotive, two-channel, high-current 40-V high-side LED driver with thermal sharing 250-mA current per channel, higher current ablilty
Same functionality with different pin-out to the compared device
TPS92623-Q1 ACTIVE Automotive three-channel high-side LED driver with thermal sharing Three-channels, more channels
TPS92624-Q1 ACTIVE Automotive four-channel high-side LED driver with thermal sharing Four-channels, more channels
TPS92633-Q1 ACTIVE Automotive three-channel high-side LED driver with thermal sharing and off-board binning Three-channels, more channels, single LED short detection and off-board bin resistor

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet TPS92622-Q1 Two-Channel, Automotive, High Side LED Driver with Thermal Sharing datasheet (Rev. A) PDF | HTML 02 Nov 2023
Certificate TPS92622SOPQ1EVM EU Declaration of Conformity (DoC) 09 Oct 2023
Certificate TPS92622Q1EVM EU RoHS Declaration of Conformity (DoC) 07 Sep 2022
EVM User's guide TPS92622Q1EVM User's Guide PDF | HTML 31 Aug 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS92622Q1EVM — TPS92622-Q1 evaluation module for two-channel 40-V high-side LED driver with thermal sharing

The TPS92622-Q1 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS92622-Q1, a linear two-channel LED driver with full LED diagnostic for automotive lighting applications.

User guide: PDF | HTML
Not available on TI.com
Evaluation board

TPS92622SOPQ1EVM — TPS92622-Q1 (HVSSOP package) evaluation module for two-channel 40-V high-side LED driver with the

The TPS92622SOPQ1EVM helps designers evaluate the operation and performance of the TPS92622-Q1 in the HVSSOP package, a linear 2-channel LED driver with full LED diagnostic for automotive lighting applications. The TPS92622-Q1 helps deal with thermal design challenges and the TPS92622SOPQ1EVM will (...)

User guide: PDF | HTML
View options
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins Download
HVSSOP (DGN) 12 View options
WSON (DRR) 12 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos