TLV62568

ACTIVE

2.5V-5.5V input, 1A high efficiency step-down buck converter in SOT23 and SOT563 package

Top

Product details

Parameters

Vin (Min) (V) 2.5 Vin (Max) (V) 5.5 Vout (Min) (V) 0.6 Vout (Max) (V) 5.5 Iout (Max) (A) 1 Iq (Typ) (mA) 0.035 Switching frequency (Min) (kHz) 1500 Switching frequency (Max) (kHz) 1500 Features Enable, Light Load Efficiency, Power Good, Synchronous Rectification Operating temperature range (C) -40 to 125 Rating Catalog Regulated outputs (#) 1 open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 SOT-23-THN (DDC) 6 5 mm² 2.9 x 1.6 SOT-23-THN (DDC) 6 SOT-5X3 (DRL) 6 2 mm² 1.65 x 1.2 open-in-new Find other Buck converters (integrated switch)

Features

  • Up to 95% Efficiency
  • Low RDS(ON) Switches 150 mΩ / 100 mΩ
  • 2.5-V to 5.5-V Input Voltage Range
  • Adjustable Output Voltage from 0.6 V to VIN
  • Power Save Mode for Light Load Efficiency
  • 100% Duty Cycle for Lowest Dropout
  • 35-µA Operating Quiescent Current
  • 1.5-MHz Switching Frequency
  • Power Good Output
  • Over Current Protection
  • Internal Soft Startup
  • Thermal Shutdown Protection
  • Available in SOT Package
  • Pin-to-Pin Compatible with TLV62569
  • Create a Custom Design Using the TLV62568 With the WEBENCH® Power Designer

All trademarks are the property of their respective owners.

open-in-new Find other Buck converters (integrated switch)

Description

The TLV62568 device is a synchronous step-down buck DC-DC converter optimized for high efficiency and compact solution size. The device integrates switches capable of delivering an output current up to 1 A.

At medium to heavy loads, the device operates in pulse width modulation (PWM) mode with 1.5-MHz switching frequency. At light load, the device automatically enters Power Save Mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 2 µA.

The TLV62568 provides an adjustable output voltage via an external resistor divider. An internal soft start circuit limits the inrush current during startup. Other features like over current protection, thermal shutdown protection and power good are built-in. The device is available in a SOT23 and SOT563 package.

open-in-new Find other Buck converters (integrated switch)
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
TLV62568A ACTIVE 2.5V-5.5V input, 1A high efficiency step-down buck converter with forced PWM in small SOT563 package 1-A converter with forced PWM in SOT563 package (pin-to-pin).
TLV62569 ACTIVE 2.5V-5.5V input, 2-A high efficiency step-down buck converter in SOT23 and SOT563 package Pin-compatible converter with higher ouput current (2 A).
TLV62585 ACTIVE 2.5V-5.5V input, 3-A high efficiency step-down converter in 2x2 QFN or SOT563 package 2.5 to 5.5-Vin, 3-A converter in 2-mm x 2-mm QFN or SOT563 package.

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
49
Description
The TLV62568APEVM-860 is designed to help the user easily evaluate and test the operation and functionality of the TLV62568APDRL Buck Converter. The EVM operates from 2.5-V to 5.5V-V input voltage. The output voltage is set to 1.8V. Output currents can go up to 1 A. The TLV62568APDRL comes in a (...)
Features
  • 2.5-V to 5.5-V Input Voltage Range
  • 0.6-V to VIN Adjustable Output Voltage
  • Up to 95% Efficiency
  • 35-μA Operating Quiescent Current
  • Fixed PWM mode
  • 100% Duty Cycle for Lowest Dropout
EVALUATION BOARDS Download
document-generic User guide
49
Description
The TLV62568EVM-789 is designed to help the user easily evaluate and test the operation and functionality of the TLV62568. The EVM converts a 2.5-V to 5.5-V input voltage to a regulated output voltage of 1.8V at up to 1 A output current. The TLV62568 comes in a small 1.6 x 2.9 mm² 5-pin SOT-23 (...)
Features
  • Input Voltage Range: 2.5V to 5.5V
  • Output Current of 1A
  • 100% Duty Cycle
  • Up to 95% Efficiency
  • Low BOM count
EVALUATION BOARDS Download
document-generic User guide
49
Description
The TLV62568EVM-860 evaluation module (EVM) is designed to help the user easily evaluate and test the operation and functionality of the TLV62568PDRL. The EVM converts a 2.5-V to 5.5-V input voltage to a regulated output voltage of 1.8 V at up to 1 A output current. The TLV62568PDRL comes in a small (...)
Features
  • Input Voltage Range: 2.5V to 5.5V
  • Output Current of 1A
  • 100% Duty Cycle
  • Up to 95% Efficiency
  • Low BOM Count
EVALUATION BOARDS Download
document-generic User guide
49
Description
The TLV62568PEVM-884 evaluation module (EVM) is designed to help the user easily evaluate and test the operation and functionality of the TLV62568PDDC. The EVM converts a 2.5-V to 5.5-V input voltage to a regulated output voltage of 1.8V at up to 1 A output current. The TLV62568PDDC comes in a small (...)
Features
  • Input Voltage Range: 2.5V to 5.5V
  • Output Current of 1A
  • 100% Duty Cycle
  • Up to 95% Efficiency
  • Low BOM count

Design tools & simulation

SIMULATION MODELS Download
SLVMBV4A.ZIP (81 KB) - PSpice Model
SIMULATION MODELS Download
SLVMC68.ZIP (87 KB) - PSpice Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
GERBER FILES Download
SLVC780.ZIP (138 KB)

Reference designs

REFERENCE DESIGNS Download
Multi-rail TV power supply reference design, with flexible partitioning to maximize power savings
TIDA-050027 — The TIDA-050027 reference design is a power distribution solution for Television (TV) platforms. By providing a configuration that emulates common voltage rails and peripherals, this design can be used as a reference design across multiple TV power architectures including LCD and OLED TV. On the (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
IEEE802.3at Type-1 PoE and 12V adapter input to point of load reference design for IP network camera
TIDA-010034 — Power over Ethernet (PoE) enables power to be delivered over the same ethernet cable as data with no danger of cross-talk, interference, or corruption of the data streams. This reference design showcases end-to-end power tree for an IP network camera powered using PoE or 12-V adapter based on the (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
High efficiency power supply architecture reference design for protection relay processor module
TIDA-010011 — This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
High efficiency, low-output ripple power supply reference design for imaging application
TIDA-01579 — The point-of-load power-tree on video surveillance systems is optimized with this reference design. This reference design has a high performance on key parameters such as output voltage accuracy, voltage ripple, and thermal dissipation. This high performance is possible with a small board area and (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
12mm x 12mm, 5-Rail Power Sequencing for Application Processors Reference Design
TIDA-01568 — This reference design demonstrates a validated and cost competitive power sequencing solution for an application processor or a high performance control platform. This design supports 5 different voltage rails, optimized with layout space of 12 mm × 12 mm. The design is also capable of (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOT-23 (DBV) 5 View options
SOT-23-THIN (DDC) 6 View options
SOT-5X3 (DRL) 6 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos