MSP432E401Y

AKTIV

SimpleLink-MCU Arm Cortex-M4F, 32 Bit, mit Ethernet, CAN, 1MB Flash und 256 kB RAM

Produktdetails

CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 90 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
CPU Arm Cortex-M4F Frequency (MHz) 120 Flash memory (kByte) 1024 RAM (kByte) 256 ADC type 12-bit SAR Features 8-/16-/32-bit EPI, Ethernet MAC with MII/RMII, Hardware encrpytion (AES/DES/SHA/MD5), Hibernation with calendar mode UART 8 CAN (#) 2 PWM (Ch) 8 SPI 4 USB USB 2.0 Hardware accelerators Floating point unit Operating temperature range (°C) -40 to 105 Rating Catalog Communication interface I2C, UART Nonvolatile memory (kByte) 1024 Number of GPIOs 90 Number of I2Cs 10 Security Cryptographic acceleration, Secure communication, Secure debug
TQFP (PDT) 128 256 mm² 16 x 16
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Integrated Ethernet PHY
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 128-Pin TQFP (PDT)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C
  • Core
    • 120-MHz Arm® Cortex®-M4F Processor Core With Floating-Point Unit (FPU)
  • Connectivity
    • Ethernet MAC: 10/100 Ethernet MAC With Integrated Ethernet PHY
    • Ethernet PHY: PHY With IEEE 1588 PTP Hardware Support
    • Universal Serial Bus (USB): USB 2.0 OTG, Host, or Device With ULPI Interface Option and Link Power Management (LPM)
    • Eight Universal Asynchronous Receivers/Transmitters (UARTs), Each With Independently Clocked Transmitter and Receiver
    • Four Quad Synchronous Serial Interface (QSSI): With Bi-, Quad-, and Advanced-SSI Support
    • Ten Inter-Integrated Circuit (I2C) Modules With High-Speed Mode Support
    • Two CAN 2.0 A and B Controllers: Multicast Shared Serial-Bus Standard
  • Memories
    • 1024KB of Flash Memory With 4-Bank Configuration Supports an Independent Code Protection for Each Bank
    • 256KB of SRAM With Single-Cycle Access, Provides Nearly 2-GB/s Memory Bandwidth at 120-MHz Clock Frequency
    • 6KB EEPROM: 500-kwrite per 2 Page Block, Leveling, Lock Protection
    • Internal ROM: Loaded With SimpleLink™ SDK Software
      • Peripheral Driver Library
      • Bootloader
    • External Peripheral Interface (EPI): 8-, 16-, or 32-Bit Dedicated Parallel Interface to Access External Devices and Memory (SDRAM, Flash, or SRAM)
  • Security
    • Advanced Encryption Standard (AES): Hardware Accelerated Data Encryption and Decryption Based on 128-, 192-, and 256-Bit Keys
    • Data Encryption Standard (DES): Hardware Accelerated Data Encryption and Decryption Supported by Block Cipher Implementation With 168-Bit Effective Key Length
    • Secure Hash Algorithm/Message Digest Algorithm (SHA/MD5): Advanced Hash Engine That Supports SHA-1, SHA-2, and MD5 Hash Computation
    • Cyclical Redundancy Check (CRC) Hardware
    • Tamper: Support for Four Tamper Inputs and Configurable Tamper Event Response
  • Analog
    • Two 12-Bit SAR-Based ADC Modules, Each Supports Up to 2 Million Samples per Second (2 Msps)
    • Three Independent Analog Comparator Controllers
    • 16 Digital Comparators
  • System Management
    • JTAG and Serial Wire Debug (SWD): One JTAG Module With Integrated Arm SWD Provides a Means of Accessing and Controlling Design-for-Test Features Such as I/O Pin Observation and Control, Scan Testing, and Debugging.
  • Development Kits and Software (See Tools and Software)
    • SimpleLink™ MSP-EXP432E401Y LaunchPad™ Development Kit
    • SimpleLink MSP432E4 Software Development Kit (SDK)
  • Package Information
    • Package: 128-Pin TQFP (PDT)
    • Extended Operating Temperature (Ambient) Range: –40°C to 105°C

The SimpleLink MSP432E401Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E401Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E401Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E401Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E401Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

The SimpleLink MSP432E401Y Arm® Cortex®-M4F microcontrollers provide top performance and advanced integration. The product family is positioned for cost-effective applications requiring significant control processing and connectivity capabilities.

The MSP432E401Y microcontrollers integrate a large variety of rich communication features to enable a new class of highly connected designs with the ability to allow critical real-time control between performance and power. The microcontrollers feature integrated communication peripherals along with other high-performance analog and digital functions to offer a strong foundation for many different target uses, spanning from human-machine interface (HMI) to networked system management controllers.

In addition, the MSP432E401Y microcontrollers offer the advantages of widely available development tools, system-on-chip (SoC) infrastructure, and a large user community for Arm-based microcontrollers. Additionally, these microcontrollers use the Arm Thumb®-compatible Thumb-2® instruction set to reduce memory requirements and, thereby, cost. When using the SimpleLink MSP432™ SDK, the MSP432E401Y microcontroller is code compatible with all members of the extensive SimpleLink family, providing flexibility to fit precise needs.

The MSP432E401Y device is part of the SimpleLink microcontroller (MCU) platform, which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee, Thread, and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit www.ti.com/simplelink.

Herunterladen Video mit Transkript ansehen Video
Eingeschränkte Designunterstützung von TI verfügbar

Bestehende Projekte, in denen dieses Produkt zum Einsatz kommt, haben eine eingeschränkte Designunterstützung von TI. Falls verfügbar, finden Sie auf dieser Seite entsprechende Sicherheitshinweise, Tools und Software. Bestehende Designs, in denen dieses Produkt zum Einsatz kommt, haben eine eingeschränkte Designunterstützung von TI. Fordern Sie eingeschränkte Designunterstützung in den TI E2E-Supportforen™ an.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 18
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet MSP432E401Y SimpleLink™ Ethernet Microcontroller datasheet PDF | HTML 26 Okt 2017
* Errata MSP432E4 SimpleLink™ Microcontrollers Silicon Errata (Rev. A) PDF | HTML 27 Jun 2025
* User guide MSP432E4 SimpleLink™ Microcontrollers Technical Reference Manual (Rev. A) PDF | HTML 25 Okt 2018
EVM User's guide TI Sensor Control Board User's Guide PDF | HTML 09 Dez 2021
EVM User's guide LEDMCUEVM-132 MSP432™ LED Controller Evaluation Module PDF | HTML 06 Okt 2020
Cybersecurity advisory Variable Time Tag Comparison on SimpleLink™ Devices PDF | HTML 05 Jun 2020
White paper Understanding Security Features for SimpleLink™ MSP432E4 Ethernet MCUs (Rev. A) 31 Jan 2019
Application note Using SimpleLink™ MSP432E4 microcontrollers over the JTAG interface (Rev. A) 11 Jan 2019
User guide SimpleLink™ Ethernet MSP432E401Y MCU LaunchPad™ Development Kit User's Guide (Rev. B) PDF | HTML 11 Sep 2018
Technical article An out-of-the-box Internet of Things: building a seamless and secure smart home ne PDF | HTML 12 Jun 2018
Technical article Boost your SimpleLink MCU development with the Open On-Chip Debugger PDF | HTML 11 Apr 2018
White paper Reducing the cost, power and size of connectivity in industrial gateway designs 28 Mär 2018
Third party document uVision Lab for the TI MSP432E4 LaunchPad Board 28 Dez 2017
Technical article Merging wired and wireless connectivity to build an intelligent gateway to the clo PDF | HTML 28 Nov 2017
User guide MSP432E4 SimpleLink™ Microcontrollers Bootloader (BSL) User's Guide (Rev. A) 16 Nov 2017
Application note System Design Guidelines for SimpleLink™ MSP432E4 Microcontrollers 31 Okt 2017
Application note Using Feature Set of I2C Master on SimpleLink MSP432E4 Microcontrollers 27 Okt 2017
White paper Building a gateway from the sensors to the cloud 26 Okt 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LAUNCHXL-CC2640R2 — CC2640R2 LaunchPad™-Development Kit für drahtlose SimpleLink™ Bluetooth® Low Energy-MCU

Dieses LaunchPad™ beschleunigt die Entwicklung mit einer BLE-Verbindung (Bluetooth®-Low-Energy) unter Verwendung der Bausteine CC2640R2F oder CC2640R2L. Das kompatible SDK bietet einen vollständig qualifizierten Bluetooth 5-Protokollstapel für Single-Mode-BLE-Anwendungen, der den (...)

Evaluierungsplatine

LEDMCUEVM-132 — MSP432E401Y MCU-Kommsplatine für LED Evaluierungsmodule

Das LEDMCUEVM-132 implementiert SPI-Kommunikation, die mehrere Bausteine auf dem Bus unterstützt, UART-Kommunikation für die LMMs-Bausteinfamilie, CAN-Transceiver für UART zur Steuerung der LMM-Bausteinfamilie, vier PWM-Signale zum Dimmen, mehrere E/As, eine isolierte 5-V-Stromversorgung, digitale (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

LP87642Q1EVM — LP87642-Q1 Evaluierungsmodul für funktionssicherheitskonformen Abwärtswandler mit vier Phasen und ei

Das LP87642Q1EVM-Board kann zum Testen, für Demos, Debuggen und Konfigurieren eines oder mehrerer LP8764-Q1-Power-Management-ICs für Automobil- und Industrieanwendungen verwendet werden. Das auf der Platine integrierte Gerät ist LP876411E2RQRQ1. Es hat eine 4-phasige 2,2-MHz-Konfiguration für eine (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

LP87644Q1EVM — Evaluierungsmodul LP87644-Q1 für Abwärtswandler mit vier Ausgängen

Das LP87644Q1EVM-Board kann zum Testen, für Demos, Debuggen und Konfigurieren eines oder mehrerer LP8764-Q1-Power-Management-ICs für Automobil- und Industrieanwendungen verwendet werden. Der auf der Platine integrierte Baustein ist LP876441E4RQKRQ1, der eine Konfiguration für 1 + 1 + 1 + 1 Phasen (...)
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

LP877451Q1EVM — LP8774x-Q1 – Evaluierungsmodul für ADAS-PMIC, rauscharme Konfiguration sowie Abwärtswandlung auf 3 V

Der LP8774x-Q1-Baustein wurde entwickelt, um die Power-Management-Anforderungen der AWR- und IWR-MMICs verschiedener Radaranwendungen im Automobilbereich und in der Industrie zu erfüllen. Der Baustein umfasst drei DC/DC-Abwärtswandler, einen 5 V-Aufwärtswandler und einen 1,8 V/3,3 V LDO. Der LDO (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

MMWAVEPOEEVM — Power over Ethernet (PoE)-Evaluierungsmodul für mmWave-Sensor

MMWAVEPOEEVM ermöglicht Power-über-Ethernet (PoE) für die Trägerkartenplattform der mmWave-Sensoren von TI (MMWAVEICBOOST und kompatible HW-Modelle separat erhältlich). MMWAVEPOEEVM vereinfacht die Bereitstellung für Entwicklung, Prüfung und Produktion durch die Bereitstellung von Strom- und (...)

Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

TI-SCB — Sensor Control Board (SCB) für Evaluierungsmodule

Das SCB ist für die Verwendung mit spezifischen Konfigurationen von Evaluierungsmodulen (EVM) ausgelegt. Zu jedem EVM gehört ein individuelles Benutzerhandbuch, in dem erklärt wird, wie das SCB mit diesem spezifischen EVM verwendet wird.
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

TMCS2100CHAREVM — TMCS2100 Evaluierungsmodul zur Charakterisierung

Das Charakterisierungs-EVM (CHAREVM) TMCS2100 ist eine Platine, die den Charakterisierungsprozess der TMCS2100-Bausteine in einem System erleichtert. In diesem Benutzerhandbuch wird beschrieben, wie Sie das TMCS2100CHAREVM zur Verwendung mit dem TMCS2100EVM einrichten. Das CHAREVM ist nicht als (...)

Evaluierungsplatine

TPS65224Q1EVM — TPS652241-Q1 – Evaluierungsmodul

Das TPS65224Q1EVM Board kann zum Testen, für Demos, Debuggen und Konfigurieren des Power-Management-ICs TPS6522x für Anwendungen in der Automobil- oder Fertigungsindustrie verwendet werden. Auf der Platine integriert ist der TPS6522430-Q1, der eine Phasenkonfiguration von 2+1+1 für die (...)
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

TPS6593EVM — TPS6593 Evaluierungsmodul für einen phasenrekonfigurierbaren PMIC mit fünf Abwärts- und vier LDO-Reg

Das Evaluierungsmodul TP6593EVM kann für Demos, zum Debuggen, zum Testen und zum Konfigurieren eines oder mehrerer TPS6593x-Power-Management-ICs für Industrieanwendungen verwendet werden. Der standardmäßig installierte Baustein ist der TPS65930400RWERQ1, bei dem es sich um die vier einphasigen (...)
Benutzerhandbuch: PDF | HTML
Evaluierungsplatine

XDS110ISO-EVM — XDS110 isoliertes Plug-in-Evaluierungsmodul für C2000 und Sitara™ controlSOMs

Die isolierte XDS110-Steckplatine ist ein Evaluierungsmodul zur Echtzeit-Debugging- und Flash-Programmierung für C2000- und Sitara-controlSOMs. Sie kann über einen nicht isolierten 120-poligen Steckverbinder oder über einen elektrisch isolierten 16-poligen Steckverbinder mit C2000- und (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Debug-Tastkopf

MSP432-DEBUGGERS — Debugger für MSP432

MSP432 MCUs are designed to work with a variety of debuggers from Texas Instruments and third party vendors.

  • Texas Instruments:
    • XDS100v2:
      • The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for TI processors. The XDS100 family features the lowest (...)
Debug-Tastkopf

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

Entwicklungskit

CC3120BOOST — SimpleLink™ Wi-Fi® CC3120 Einsteckmodul für drahtloses Netzwerkprozessor-BoosterPack™

Der SimpleLink™ Wi-Fi® CC3120 Wireless Network Processor bietet Nutzer:innen die Flexibilität, jedem Mikrocontroller (MCU) WLAN-Konnektivität hinzuzufügen. Das Plug-in-Modul BoosterPack™ CC3120 (CC3120BOOST) ist eine Platine, die einfach mit den MCU-Launchpad-Kits von TI verbunden werden kann (...)

Benutzerhandbuch: PDF
Entwicklungskit

LP-XDS110ET — XDS110ET LaunchPad™ Entwicklungskit-Debugger mit EnergyTrace™-Software

Der Debugger des LaunchPad-Entwicklungskits LP-XDS110ET ist ein Tool zum Programmieren und Debuggen von Mikrocontrollern, Mikroprozessoren und DSP XDS-kompatiblen Bausteinen von Texas Instruments (TI). Der LP-XDS110ET wurde für den direkten Anschluss an geteilte LaunchPad-Entwicklungskits über den (...)

Entwicklungskit

MSP-EXP432E401Y — MSP432E401Y LaunchPad™ Development Kit für Ethernet SimpleLink™ MCU

Das SimpleLink™ Ethernet MSP432E401Y Microcontroller LaunchPad™ Development Kit ist eine benutzerfreundliche Evaluierungsplattform für SimpleLink™ Ethernet-MCUs auf Basis des Arm® Cortex®-M4F. Das Ethernet LaunchPad Development Kit hebt den MSP432E401Y-Mikrocontroller hervor, der über einen (...)

Benutzerhandbuch: PDF | HTML
Software-Entwicklungskit (SDK)

SIMPLELINK-MSP432-SDK SimpleLink MSP432P4 High-precision ADC MCU Software Development

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Software-Entwicklungskit (SDK)

SIMPLELINK-MSP432E4-SDK SimpleLink MSP432E4 Ethernet MCU Software Development Kit

The MSP432 software development kit (SDK) is a comprehensive software package that enables engineers to quickly develop highly functional applications on Texas Instruments MSP432™ microcontrollers (MCUs). The MSP432 SDK is comprised of multiple compatible software components including RTOS, (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Software-Entwicklungskit (SDK)

SIMPLELINK-WIFI-CC3120-SDK-PLUGIN — SIMPLELINK-SDK-WIFI-PLUGIN

Wichtiger Hinweis:

Die SimpleLink-SDKs werden regelmäßig aktualisiert. Klicken Sie oben auf „Benachrichtigen“, um die neuesten Versions-Updates zu erhalten.

Das CC3120 SDK enthält Treiber, viele Musteranwendungen für WLAN-Funktionen und Internet sowie die Dokumentation, die zur Verwendung der CC3120 (...)

Benutzerhandbuch: PDF
Treiber oder Bibliothek

SIMPLELINK-SDK-TI-15-4-STACK-PLUGIN TI 15.4 Stack plug-in for the SimpleLink™ MCU SDK

The SimpleLink™ SDK TI 15.4 Stack Plug-in is a companion software package that enables the use of the IEEE 802.11.15.4 stack from TI on any standard SimpleLink microcontroller (MCU). This plug-in supports the SimpleLink Sub-1 GHz CC1310 wireless MCU as a network processor. This software package (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

ARM-CGT — Arm®-Code-Generierungstools – Compiler

Die TI-Arm®-Codegenerierungs (Compiler)-Tools unterstützen die Entwicklung von Anwendungen für Plattformen auf TI-Arm-Basis, insbesondere solche, die die Bausteine der Serien TI-Arm-Cortex-M- und Cortex-R aufweisen.

Die neuen ARM-CGT-CLANG-Tools basieren auf dem Open-Source-Clang-Compiler und (...)

Benutzerhandbuch: PDF | HTML
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO Code Composer Studio integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Start Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

MSPKEIL — ARM® Keil® MDK

MDK Microcontroller Development Kit

ARM® Keil® MDK is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications. Keil MDK supports SimpleLink™ MSP432™ microcontrollers, and includes a fully integrated debugger for source and disassembly level (...)

IDE, Konfiguration, Compiler oder Debugger

SYSCONFIG Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Start Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

ULPADVISOR — ULP (Ultra-Low Power) Advisor

ULP (Ultra-Low Power) Advisor is a tool for guiding developers to write more efficient code to fully utilize the unique ultra-low power features of MSP and MSP432 microcontrollers. Aimed at both experienced and new microcontroller developers, ULP Advisor checks your code against a thorough ULP (...)
Onlineschulungen

SIMPLELINK-ACADEMY-MSP432E4 SimpleLink™ Academy for MSP432E4

SimpleLink Academy for MSP432E4 delivers easy-to-use training modules that span a wide range of topics for all LaunchPads in the MSP432E family of microcontrollers
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Plug-in

SIMPLELINK-BLE-PLUGIN-AZURE-GATEWAY-EXAMPLE-PACK SimpleLink™ Bluetooth low energy plug-in Azure™ gateway example pack

The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Plug-in

SIMPLELINK-SDK-BLUETOOTH-PLUGIN Bluetooth Plug-in for SimpleLink™ MCU SDK

The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Plug-in

SIMPLELINK-SDK-LVGL-PLUGIN SimpleLink™ SDK LittlevGL plug-in

The SimpleLink™ SDK LVGL Plugin is a companion software package that enables advanced graphics capabilities on various SimpleLink™ MCU platforms by integrating the free and open-source 3rd party library, LittlevGL, into the SimpleLink SDK ecosystem. The Plug-in provides example hardware abstraction (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Plug-in

SIMPLELINK-SDK-WIFI-PLUGIN SimpleLink™ software development kit (SDK) Wi-Fi® plug-in

The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Durchsuchen Download-Optionen
Software-Programmiertool

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Start Download-Optionen
Referenzdesigns

PMP23630 — Referenzdesign für Rechenzentren für 30-kW-HVDC-PSU

Dieses Referenzdesign ist eine hocheffiziente zweistufige 30-kW-Stromversorgung mit Hochspannungs-DC-Ausgang (High Voltage DC, HVDC). Die erste Stufe ist ein dreistufiger Wandler mit fliegendem Kondensator und Leistungsfaktorkorrektur (PFC, Power Factor Correction), der von einer dreiphasigen (...)
Test report: PDF
Referenzdesigns

TIDA-050029 — Referenzdesign für SEPIC-LED-Treiber zur Ansteuerung von zwei Fahrzeugscheinwerfern mit 45 W und 15 

Dieses Referenzdesign zeigt den zweikanaligen LED-Controller TPS92682–Q1 in einer Fahrzeug-Frontscheinwerferanwendung mit Fernlicht (HB), Abblendlicht (LB), Tagfahrlicht (DRL) und Standlicht (POS). Das Design implementiert mithilfe eines TPS92682-Q1-Bausteins eine einstufige Stromversorgungslösung (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-050040 — Referenzdesign für LED-Scheinwerfer-Treibermodul für den Halogenersatz für die Automobilindustrie

Dieses Referenzdesign zeigt den TPS92682 und den TPS92520 als komplett eigenständigen, dreikanaligen LED-Treiber für Scheinwerferanwendungen.  Das Design ist als kostengünstiger Ersatz für ein Halogen-Scheinwerfermodul konzipiert, das mit einem Karosseriesteuergerät kompatibel ist.  Die drei (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-1018 — Power Over Ethernet® (PoE)-Referenzdesign für industrielle Gateways

Dieses Referenzdesign integriert das Power over Ethernet (PoE) von TI mit dem hochleistungsfähigen Ethernet-Mikrocontroller (MCU) SimpleLink™ MSP432E4 und Ethernet, um Kunden die Entwicklung von Anwendungen für das Internet der Dinge (IoT) in einem Board mit kleinem Formfaktor zu ermöglichen. Das (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TQFP (PDT) 128 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos