Startseite Mikrocontroller (MCUs) & Prozessoren C2000-Echtzeit-Mikrocontroller
Startseite
Mikrocontroller (MCUs) & Prozessoren
C2000-Echtzeit-Mikrocontroller
NEU

TMS320F28P550SJ

VORSCHAU

MCU für die Automobilindustrie C2000™, 32 Bit, 1× C28x + 1× CLA, 150 MHz, 1,1 MB Flash, 5× ADC 3,

Jetzt bestellen
Datenblatt
Benutzerhandbücher
Fehlerverzeichnis

TMS320F28P550SJ

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

CPU C28x, CLA Frequency (MHz) 150 Flash memory (kByte) 1024 RAM (kByte) 133 ADC resolution (Bps) 12 Total processing (MIPS) 300 Features Configurable logic block, FPU32, InstaSPIN-FOC technology, TINIE accelerator UART 4 CAN (#) 2 PWM (Ch) 24 Number of ADC channels 26, 28, 35, 39 Direct memory access (Ch) 6 SPI 2 QEP 3 USB USB 2.0 Operating temperature range (°C) -40 to 150 Rating Catalog Communication interface CAN, FSI, I2C, LIN, PMBUS, SPI, UART
CPU C28x, CLA Frequency (MHz) 150 Flash memory (kByte) 1024 RAM (kByte) 133 ADC resolution (Bps) 12 Total processing (MIPS) 300 Features Configurable logic block, FPU32, InstaSPIN-FOC technology, TINIE accelerator UART 4 CAN (#) 2 PWM (Ch) 24 Number of ADC channels 26, 28, 35, 39 Direct memory access (Ch) 6 SPI 2 QEP 3 USB USB 2.0 Operating temperature range (°C) -40 to 150 Rating Catalog Communication interface CAN, FSI, I2C, LIN, PMBUS, SPI, UART
LQFP (PM) 64 144 mm² 12 x 12 LQFP (PZ) 100 256 mm² 16 x 16 TQFP (PDT) 128 256 mm² 16 x 16 VQFN (RSH) 56 49 mm² 7 x 7
  • Real-time processing:
    • 150MHz C28x 32-bit DSP CPU
    • Equivalent to 300MHz Arm® Cortex®-M7 based device on real-time signal chain performance (see the Real-time Benchmarks Showcasing C2000™ Control MCU’s Optimized Signal Chain Application Note
    • IEEE 754 single-precision Floating-Point Unit (FPU32)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • Neural-Network Processing Unit (NNPU)
    • CRC Engine and Instructions (VCRC)
  • Programmable Control Law Accelerator (CLA)
  • On-chip memory
    • 1088KB of flash (ECC-protected) across five independent banks
      • Four 256KB banks
      • One 64KB bank, ideal of LFU/Bootloaders/data
    • 8KB of OTP (One Time Programmable flash memory)
    • 133KB of RAM (ECC/Parity protected)
  • Security
    • Secure Boot
    • JTAG Lock
    • Advanced Encryption Standard (AES) accelerator
    • Unique Identification (UID) number
  • Clock and system control
    • Two internal 10MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Internal VREG generation allows for single-supply design
    • Brownout reset (BOR) circuit
    • 5V failsafe and tolerant capability on 4 GPIOs for PMBUS/I2C support
    • Configurable 1.35V VIH on 4 GPIOs
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 91 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (22 shared with Analog)
    • 17 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
      • Fast Plus Mode Support - 1MHz SCL
      • 5V/3.3V/1.35V VIH support on select pins
    • Two Inter-integrated Circuit (I2C) interfaces
    • Two Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port
      • 4KB message RAM per MCAN module, independent of system memory
      • Ability to re-use RAM for CPU data variables if MCAN is not used
    • One Universal Serial Bus (USB 2.0 MAC + PHY)
    • Two Serial Peripheral Interface (SPI) ports
    • Three UART-compatible Serial Communication Interface (SCI)
    • One UART-compatible Local Interconnect Network (LIN) interface
  • Analog system
    • Five 3.9MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 39 external channels (includes one gpdac output)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
      • Low DAC output to pin capability on CMPSS1
    • One 12-bit buffered DAC output
    • Three Programmable Gain Amplifiers (PGAs)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Programmable output filtering
  • Enhanced control peripherals
    • 24 ePWM channels with 16 channels that have high-resolution capability (150ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Two Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
    • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • 2 tiles
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Live Firmware Update (LFU)
  • Diagnostic features
    • Memory Power-On Self-Test (MPOST)
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 and IEC 61508 system design
    • Systematic capability up to ASIL D and SIL 3 targeted
    • Hardware integrity up to ASIL B targeted
  • Safety-related certification
    • ISO 26262 certification up to ASIL B by TÜV SÜD planned
  • Package options:
    • 128-pin Thin Quad Flatpack (TQFP)[PDT suffix]
    • 100-pin Low-profile Quad Flatpack (LQFP)[PZ suffix]
    • 80-pin TQFP [PNA suffix]
    • 64-pin LQFP [PM suffix]
    • 56-pin Very Thin Quad Flatpack No-Lead (VQFN) [RSH suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 150°C
  • Real-time processing:
    • 150MHz C28x 32-bit DSP CPU
    • Equivalent to 300MHz Arm® Cortex®-M7 based device on real-time signal chain performance (see the Real-time Benchmarks Showcasing C2000™ Control MCU’s Optimized Signal Chain Application Note
    • IEEE 754 single-precision Floating-Point Unit (FPU32)
    • Trigonometric Math Unit (TMU)
      • Support for Nonlinear Proportional Integral Derivative (NLPID) control
    • Neural-Network Processing Unit (NNPU)
    • CRC Engine and Instructions (VCRC)
  • Programmable Control Law Accelerator (CLA)
  • On-chip memory
    • 1088KB of flash (ECC-protected) across five independent banks
      • Four 256KB banks
      • One 64KB bank, ideal of LFU/Bootloaders/data
    • 8KB of OTP (One Time Programmable flash memory)
    • 133KB of RAM (ECC/Parity protected)
  • Security
    • Secure Boot
    • JTAG Lock
    • Advanced Encryption Standard (AES) accelerator
    • Unique Identification (UID) number
  • Clock and system control
    • Two internal 10MHz oscillators
    • Crystal oscillator or external clock input
    • Windowed watchdog timer module
    • Missing clock detection circuitry
    • Dual-clock Comparator (DCC)
  • 3.3V I/O design
    • Internal VREG generation allows for single-supply design
    • Brownout reset (BOR) circuit
    • 5V failsafe and tolerant capability on 4 GPIOs for PMBUS/I2C support
    • Configurable 1.35V VIH on 4 GPIOs
  • System peripherals
    • 6-channel Direct Memory Access (DMA) controller
    • 91 individually programmable multiplexed General-Purpose Input/Output (GPIO) pins (22 shared with Analog)
    • 17 digital inputs on analog pins
    • Enhanced Peripheral Interrupt Expansion (ePIE)
    • Multiple low-power mode (LPM) support
  • Communications peripherals
    • One Power-Management Bus (PMBus) interface
      • Fast Plus Mode Support - 1MHz SCL
      • 5V/3.3V/1.35V VIH support on select pins
    • Two Inter-integrated Circuit (I2C) interfaces
    • Two Controller Area Network with Flexible Data-Rate (CAN FD/MCAN) bus port
      • 4KB message RAM per MCAN module, independent of system memory
      • Ability to re-use RAM for CPU data variables if MCAN is not used
    • One Universal Serial Bus (USB 2.0 MAC + PHY)
    • Two Serial Peripheral Interface (SPI) ports
    • Three UART-compatible Serial Communication Interface (SCI)
    • One UART-compatible Local Interconnect Network (LIN) interface
  • Analog system
    • Five 3.9MSPS, 12-bit Analog-to-Digital Converters (ADCs)
      • Up to 39 external channels (includes one gpdac output)
      • Four integrated Post-Processing Blocks (PPB) per ADC
    • Four windowed comparators (CMPSS) with 12-bit reference Digital-to-Analog Converters (DACs)
      • Digital glitch filters
      • Low DAC output to pin capability on CMPSS1
    • One 12-bit buffered DAC output
    • Three Programmable Gain Amplifiers (PGAs)
      • Unity gain support
      • Inverting and non-inverting gain mode support
      • Programmable output filtering
  • Enhanced control peripherals
    • 24 ePWM channels with 16 channels that have high-resolution capability (150ps resolution)
      • Integrated dead-band support
      • Integrated hardware trip zones (TZs)
    • Two Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules with support for CW/CCW operation modes
    • Embedded Pattern Generator (EPG)
  • Configurable Logic Block (CLB)
    • 2 tiles
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Live Firmware Update (LFU)
  • Diagnostic features
    • Memory Power-On Self-Test (MPOST)
  • Functional Safety-Compliant targeted
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 and IEC 61508 system design
    • Systematic capability up to ASIL D and SIL 3 targeted
    • Hardware integrity up to ASIL B targeted
  • Safety-related certification
    • ISO 26262 certification up to ASIL B by TÜV SÜD planned
  • Package options:
    • 128-pin Thin Quad Flatpack (TQFP)[PDT suffix]
    • 100-pin Low-profile Quad Flatpack (LQFP)[PZ suffix]
    • 80-pin TQFP [PNA suffix]
    • 64-pin LQFP [PM suffix]
    • 56-pin Very Thin Quad Flatpack No-Lead (VQFN) [RSH suffix]
  • Temperature options:
    • Junction (TJ): –40°C to 150°C

The TMS320F28P55x (F28P55x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 150MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent 32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own dedicated memory resources and it can directly access the key peripherals that are required in a typical control system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware task-switching.

The F28P55x supports up to 1088KB of flash memory divided into four 256KB banks plus one 64KB bank, which enable programming one bank and execution in another bank in parallel. Up to 133KB of on-chip SRAM is also available to supplement the flash memory.

The Live Firmware Update hardware enhancements on F28P55x allow fast context switching from the old firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28P55x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Twenty-four PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, and CAN FD) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD28P55X evaluation board or the LAUNCHXL-F28P55X development kit, and download C2000Ware.

The TMS320F28P55x (F28P55x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics, including but not limited to: high power density, high switching frequencies, and supporting the use of GaN and SiC technologies.

These include such applications as:

The real-time control subsystem is based on TI’s 32-bit C28x DSP core, which provides 150MHz of signal-processing performance for floating- or fixed-point code running from either on-chip flash or SRAM. The C28x CPU is further boosted by the Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and VCRC (Cyclical Redundancy Check) extended instruction sets, speeding up common algorithms key to real-time control systems.

The CLA allows significant offloading of common tasks from the main C28x CPU. The CLA is an independent 32-bit floating-point math accelerator that executes in parallel with the CPU. Additionally, the CLA has its own dedicated memory resources and it can directly access the key peripherals that are required in a typical control system. Support of a subset of ANSI C is standard, as are key features like hardware breakpoints and hardware task-switching.

The F28P55x supports up to 1088KB of flash memory divided into four 256KB banks plus one 64KB bank, which enable programming one bank and execution in another bank in parallel. Up to 133KB of on-chip SRAM is also available to supplement the flash memory.

The Live Firmware Update hardware enhancements on F28P55x allow fast context switching from the old firmware to the new firmware to minimize application downtime when updating the device firmware.

High-performance analog blocks are integrated on the F28P55x real-time microcontroller (MCU) and are closely coupled with the processing and PWM units to provide optimal real-time signal chain performance. Twenty-four PWM channels, all supporting frequency-independent resolution modes, enable control of various power stages from a 3-phase inverter to power factor correction and advanced multilevel power topologies.

The inclusion of the Configurable Logic Block (CLB) allows the user to add custom logic and potentially integrate FPGA-like functions into the C2000 real-time MCU.

Interfacing is supported through various industry-standard communication ports (such as SPI, SCI, I2C, PMBus, LIN, and CAN FD) and offers multiple pin-muxing options for optimal signal placement.

Want to learn more about features that make C2000 Real-Time MCUs the right choice for your real-time control system? Check out The Essential Guide for Developing With C2000™ Real-Time Microcontrollers and visit the C2000™ real-time control MCUs page.

The Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) Getting Started Guide covers all aspects of development with C2000 devices from hardware to support resources. In addition to key reference documents, each section provides relevant links and resources to further expand on the information covered.

Ready to get started? Check out the TMDSCNCD28P55X evaluation board or the LAUNCHXL-F28P55X development kit, and download C2000Ware.
open-in-new Andere C2000-Echtzeit-Mikrocontroller suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 40
Typ Titel Datum
* Data sheet TMS320F28P55x Real-Time Microcontrollers datasheet PDF | HTML 02 Apr 2024
* Errata TMS320F28P55x Real-Time MCUs Silicon Errata PDF | HTML 02 Apr 2024
* User guide TMS320F28P55x Real-Time Microcontrollers Technical Reference Manual PDF | HTML 05 Apr 2024
Application note Power Supply and Monitoring Solution for C2000 MCU Automotive Applications PDF | HTML 17 Apr 2024
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. H) PDF | HTML 09 Apr 2024
Application note C2000 Type-2 Programmable Gain Amplifier Use Cases PDF | HTML 04 Apr 2024
User guide Migration Between TMS320F28P5xx and TMS320F280013x/TMS320F280015x PDF | HTML 03 Apr 2024
User guide Migration Between TMS320F28P5xx and TMS320F28003x PDF | HTML 02 Apr 2024
Design guide 10-kW, Bidirectional Three-Phase Three-Level (T-type) Inverter & PFC Ref. Design (Rev. I) PDF | HTML 07 Jul 2023
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using PSPICE-FOR-TI) (Rev. A) PDF | HTML 24 Mär 2023
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using TINA-TI simulation tool) (Rev. A) PDF | HTML 24 Mär 2023
Application note Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 13 Mär 2023
Application note C2000 ePWM Developer’s Guide (Rev. A) PDF | HTML 24 Feb 2023
Design guide Bidirectional, Dual Active Bridge Reference Design for Level 3 EV Charging Stations (Rev. D) PDF | HTML 31 Jan 2023
User guide Live Firmware Update Without Device Reset on C2000™ MCUs (Rev. B) PDF | HTML 29 Sep 2022
Application note LIN Protocol and Physical Layer Requirements (Rev. A) PDF | HTML 24 Aug 2022
Application note Intelligent LLC SR Control Using C2000 and UCD7138 (Rev. A) PDF | HTML 27 Jun 2022
Application note Implement three-phase interleaved LLC on C2000 Type-4 PWM PDF | HTML 30 Mär 2022
Design guide 11-kW, Bidirectional, Three-Phase ANPC Based on GaN Reference Design (Rev. A) PDF | HTML 18 Mär 2022
Application note C2000 Memory Power-On Self-Test (M-POST) (Rev. A) PDF | HTML 03 Mär 2022
Application brief Using An Op Amp for High-Side Current Sensing (Rev. A) PDF | HTML 07 Dez 2021
Application note C2000 SysConfig PDF | HTML 20 Okt 2021
Application note Getting Started with the MCAN (CAN FD) Module PDF | HTML 20 Okt 2021
White paper Speed Up Development With C2000™ Real-Time MCUs Using SysConfig 20 Okt 2021
Application note Leverage New Type ePWM Features for Multiple Phase Control PDF | HTML 11 Mai 2021
E-book An Engineer’s Guide to Designing with Precision Amplifiers 29 Apr 2021
White paper Four key design considerations when adding energy storage to solar power grids 22 Mär 2021
Application note CRM/ZVS PFC Implementation Based on C2000 Type-4 PWM Module PDF | HTML 18 Feb 2021
Application note Power Topologies in Electric Vehicle Charging Stations PDF | HTML 16 Sep 2020
Application note Secure BOOT On C2000 Device 21 Jul 2020
Application note Configurable Error Generator for Controller Area Network PDF | HTML 19 Dez 2019
Application note Fast Integer Division – A Differentiated Offering From C2000 Product Family PDF | HTML 14 Jun 2019
Application note Embedded Real-Time Analysis and Response for Control Applications PDF | HTML 29 Mär 2019
Circuit design Inverting op amp with non-inverting positive reference voltage circuit (Rev. A) 04 Feb 2019
Circuit design Non-inverting op amp with inverting positive reference voltage circuit (Rev. A) 04 Feb 2019
White paper Maximizing power for Level 3 EV charging stations 12 Jun 2018
User guide Digitally Controlled Solar Micro Inverter Using C2000 MCU CCS User's Guide (Rev. B) 09 Jun 2017
Application note AN-20 An Applications Guide for Op Amps (Rev. C) 01 Mai 2013
User guide Serial Peripheral Interface (SPI) for KeyStone Devices User’s Guide (Rev. A) 30 Mär 2012
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. S) PDF | HTML 30 Aug 2001

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LAUNCHXL-F28P55X — LaunchPad-Entwicklungssatz TMS320F28P55x für Echtzeit-MCU C2000

Das Evaluierungsmodul TPSM8287A15BBHEVM ermöglicht die Evaluierung des TPSM8287A15, eines Pin-zu-Pin-kompatiblen Abwärtsleistungsmoduls (15 A) mit I²C-Schnittstelle, Fernerfassung und Frequenzsynchronisierung in einem umspritzten QFN-Gehäuse mit 4,5 × 6,8 × 4 mm. Das EVM liefert eine einstellbare (...)

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Evaluierungsplatine

TMDSCNCD28P55X — TMDSCNCD28P55X controlCARD – Evaluierungsmodul

TMDSCNCD28P55X ist eine kostengünstige Evaluierungs- und Entwicklungsplatine für die C2000™-MCU-Serie von F28P55x-Bausteinen von TI. Sie wird mit einem HSEC180 (180-poligen Hochgeschwindigkeits-Edge-Steckverbinder) geliefert und eignet sich als controlCARD ideal für die erste Evaluierung und (...)

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Tochterkarte

TMDSHSECDOCK — HSEC180 controlCARD-Basisboard-Docking-Station

TMDSHSECDOCK is a baseboard that provides header pin access to key signals on compatible HSEC180-based controlCARDs.  A breadboard area is available for rapid prototyping.  Board power can be provided by the provided USB cable or a 5V barrel supply.

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU110-U — XDS110 JTAG-Debug-Tastkopf

Der XDS110 von Texas Instruments ist eine neue Klasse von Debug-Tastkopf (Emulator) für Embedded-Prozessoren von TI. Der XDS110 ersetzt die XDS100-Familie und unterstützt eine größere Anzahl von Standards (IEEE1149.1, IEEE1149.7, SWD) in einem einzigen Pod. Alle XDS-Debug-Tastköpfe unterstützen (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Debug-Tastkopf

TMDSEMU200-U — XDS200-USB-Debug-Tastkopf

Die XDS200 ist eine Debug-Sonde (Emulator) zum Debuggen von Embedded-Bausteinen von TI. Die XDS200 bietet ein ausgewogenes Preis-Leistungsverhältnis im Vergleich zum preiswerten XDS110 und dem leistungsstarken XDS560v2 und unterstützt zahlreiche Standards (IEEE1149,1, IEEE1149,7, SWD) in einem (...)

Nicht verfügbar auf TI.com
Hardware-Programmiertool

C2000-GANG — C2000 Gang-Programmierer

From Elprotronics, Inc. - The C2000 Gang Programmer is a C2000 device programmer that can program up to eight identical C2000 devices at the same time. The C2000 Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)

Benutzerhandbuch: PDF
Optionen anzeigen
Software-Entwicklungskit (SDK)

C2000WARE-DIGITALPOWER-SDK — DigitalPower SDK for C2000 Real-time Controllers

    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
lock = Nur mit Exportgenehmigung (1 Minute)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
C2000-Echtzeit-Mikrocontroller
TMS320F280021 — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 32 KB Flash TMS320F280021-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 32 KB Flash TMS320F280023 — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 64 KB Flash TMS320F280023-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 64 KB Flash TMS320F280023C — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 64 KB Flash, CLB TMS320F280025 — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash TMS320F280025-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash TMS320F280025C — C2000™ 32-bit-MCU mit 100-MHz, FPU, TMU, 128 kb Flash, CLB TMS320F280025C-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, CLB TMS320F280033 — C2000™ 32-Bit-MCU 120 MHz 128 KB Flash, FPU, TMU, AES und CAN-FD TMS320F280034 — C2000™ 32-Bit-MCU, 120 MHz, 128 KB Flashspeicher, FPU, TMU mit CLA, AES und CAN-FD TMS320F280034-Q1 — C2000™ 32-Bit-MCU für den Automobilbereich 120 MHz 128 KB Flash, FPU, TMU mit CLA, AES und CAN-FD TMS320F280036-Q1 — C2000™ 32-Bit-MCU für den Automobilbereich 120 MHz 256 KB Flash, FPU, TMU mit CLA, AES und CAN-FD TMS320F280036C-Q1 — C2000™ 32-Bit-MCU für den Automobilbereich 120 MHz 256 KB Flash, FPU, TMU mit CLA, CLB, AES und CAN- TMS320F280037 — C2000™ 32-Bit-MCU 120 MHz 256 KB Flash, FPU, TMU mit CLA, AES und CAN-FD TMS320F280037-Q1 — C2000™ 32-Bit-MCU, 120-MHz, 256-KB-Flashspeicher, FPU, TMU mit CLA, AES und CAN-FD für die Automobil TMS320F280037C — C2000™ 32-Bit-MCU 120 MHz 256 KB Flash, FPU, TMU mit CLA, CLB, AES und CAN-FD TMS320F280037C-Q1 — C2000™ 32-Bit-MCU für den Automobilbereich 120 MHz 256 KB Flash, FPU, TMU mit CLA, CLB, AES und CAN- TMS320F280038-Q1 — C2000™ 32-Bit-MCU für den Automobilbereich 120 MHz 384 KB Flash, FPU, TMU mit CLA, AES und CAN-FD TMS320F280038C-Q1 — C2000™ 32-Bit-MCU, 120 MHz, 384 KB Flashspeicher, FPU, TMU mit CLA, CLB, AES und CAN-FD für die Auto TMS320F280039 — C2000™ 32-Bit-MCU, 120-MHz-, 384-KB-Flashspeicher, FPU, TMU mit CLA, AES und CAN-FD TMS320F280039-Q1 — C2000™ 32-Bit-MCU für den Automobilbereich 120 MHz 384 KB Flash, FPU, TMU mit CLA, AES und CAN-FD TMS320F280039C — C2000™ 32-Bit-MCU 120 MHz 384 KB Flash, FPU, TMU mit CLA, CLB, AES und CAN-FD TMS320F280039C-Q1 — C2000™ 32-Bit-MCU für die Automobilindustrie, 120 MHz, 384 KB Flash, FPU, TMU mit CLA, CLB, AES TMS320F280040-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, PGAs, SDF TMS320F280040C-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, InstaSPIN TMS320F280041 — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, CLA, PGAs, SDFM TMS320F280041-Q1 — C2000™-MCU für den Automobilbereich, 32-Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, PGAs, SDF TMS320F280041C — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, InstaSPIN-FOC, CLB, PGAs, SDFM TMS320F280041C-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 128 KB Flash-Speicher, InstaSPIN TMS320F280045 — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash, PGAs, SDFM TMS320F280048-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, PGAs TMS320F280048C-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, Inst TMS320F280049 — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, PGAs, SDFM TMS320F280049-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, PGAs TMS320F280049C — C2000™-MCU, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, InstaSPIN-FOC, CLB, PGAs, SDF TMS320F280049C-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 100 MHz, FPU, TMU, 256 KB Flash-Speicher, CLA, Inst TMS320F28075 — C2000™ 32-bit-MCU mit 120 MHz, FPU, TMU, 512 KB Flash, CLA, SDFM TMS320F28075-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 120 MHz, FPU, TMU, 512 KB Flash-Speicher, CLA, SDFM TMS320F28076 — C2000™ 32-bit MCU mit 120 MHz, FPU, TMU, 512 KB Flash, CLA, CLB, SDFM TMS320F28374D — C2000™ 32-bit-MCU mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 512 KB Flash, EMIF, 12b ADC TMS320F28374S — C2000™ 32-Bit-MCU mit 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 512 KB Flash, EMIF, 12b-ADC TMS320F28375D — C2000™ 32-bit-MCU mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b-ADC TMS320F28375S — C2000™ 32-bit-MCU mit 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash, EMIF, 12b-ADC TMS320F28375S-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash-Spe TMS320F28376D — C2000™ 32-bit-MCU mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 512 KB Flash, EMIF, 16 b-ADC TMS320F28376S — C2000™ 32-bit-MCU mit 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 512 KB Flash, EMIF, 16b ADC TMS320F28377D — C2000™ 32-bit-MCU mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, EMIF, 16b ADC TMS320F28377D-EP — C2000™ Verbessertes Produkt, 32-bit-MCU mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1 MB Flash, EMIF, 16-b TMS320F28377D-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash-Spe TMS320F28377S — C2000™ 32-bit-MCU mit 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash, EMIF, 16b ADC TMS320F28377S-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash-Spe TMS320F28378D — C2000™-MCU, 32 Bit, 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, CLB, EMIF, 12b-ADC TMS320F28378S — C2000™-MCU, 32 Bit, 400 MIPS, 1xCPU, 1xCLA, FPU, TMU, 1024 KB Flash, CLB, EMIF, 12b-ADC TMS320F28379D — C2000™-MCU, 32 Bit, 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash, CLB, EMIF, 16b-ADC TMS320F28379D-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit 800 MIPS, 2xCPU, 2xCLA, FPU, TMU, 1024 KB Flash-Spe TMS320F28379S — C2000™-MCU, 32 Bit, 400 MIPS, 1x CPU, 1x CLA, FPU, TMU, 1024-KB Flash, CLB, EMIF und 16-b-A TMS320F28384D — C2000™ 32-Bit-MCU mit Konnektivitätsmanager, 2x C28x+CLA CPU, 1,5-MB-Flash, FPU64, Ethernet TMS320F28384D-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit Connectivity Manager, 2x C28x + CLA CPU, 1,5 MB Fla TMS320F28384S — C2000™ 32-Bit-MCU mit Konnektivitätsmanager, 1x C28x+CLA CPU, 1,0-MB-Flash, FPU64, Ethernet TMS320F28384S-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit Connectivity Manager, 1x C28x + CLA CPU, 1 MB Flash TMS320F28386D — C2000™ 32-Bit-MCU mit Konnektivitätsmanager, 2x C28x+CLA CPU, 1,5-MB-Flash, FPU64, CLB, Ethernet TMS320F28386D-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit Connectivity Manager, 2x C28x + CLA CPU, 1,5 MB Fla TMS320F28386S — C2000™ 32-Bit-MCU mit Konnektivitätsmanager, 1x C28x+CLA CPU, 1,0-MB-Flash, FPU64, CLB, Ethernet TMS320F28386S-Q1 — C2000™-MCU für den Automobilbereich, 32 Bit, mit Connectivity Manager, 1x C28x + CLA CPU, 1 MB Flash TMS320F28388D — C2000™ 32-Bit-MCU mit Connectivity Manager, 2x C28x + CLA CPU, 1,5 MB Flash, FPU64, CLB, ENET, Ether TMS320F28388S — C2000™ 32-Bit-MCU mit Konnektivitätsmanager, 1x C28x+CLA CPU, 1,0-MB-Flash, FPU64, CLB, ENET, EtherC TMS320F2800152-Q1 — C2000™ 32-bit MCU, 100 MHz, 64 KB Flash mit CAN-FD, Lockstep ASIL B für die Automobilindustrie TMS320F2800155 — C2000™ 32-bit MCU 120 MHz 128-KB-Flashspeicher mit HRPWM, CAN-FD TMS320F28P650DK — C2000™ 32-Bit-MCU, 2x C28x+CLA CPU, Lock-Step, 1,28 MB Flash, 16-b-ADC, HRPWM, ETHERCAT, CAN-FD, AES TMS320F28P550SJ — MCU für die Automobilindustrie C2000™, 32 Bit, 1× C28x + 1× CLA, 150 MHz, 1,1 MB Flash, 5× ADC 3,
Hardware-Entwicklung
PMP41006 — 1-kW-Referenzdesign mit CCM-Totem-Pole PFC and Strommodus-LLC umgesetzt durch C2000™ and GaN TIDA-010054 — Referenzdesign für bidirektionale, Dual-Active-Bridge für Ladestationen für Elektrofa TIDA-010062 — 1-kW, 80+ titanium, GaN CCM totem pole bridgeless PFC and half-bridge LLC with LFU reference design TIDA-01606 — Bidirektionaler dreiphasiger dreistufiger 10-kW-(T-Typ)-Inverter mit PFC – Referenzdesign TIDM-02002 — Referenzdesign für eine bidirektionale, CLLLC-resonante, duale Aktivbrücke (DAB) für HEV/EV-Ladegerä TIDM-02009 — Referenzdesign für bidirektionale DC-DC-Wandlung mit ASIL D-Sicherheitskonzept und Hochgeschwindigke TIDM-02011 — Referenzdesign für Live-Firmware-Update mit C2000™-Echtzeit-MCUs TIDM-1000 — Referenzdesign für Dreiphasen-Leistungsfaktorkorrektor auf Basis eines Vienna-Gleichrichters unter V TIDM-1007 — Hocheffiziente GaN CCM-Totem-Pole-Brücke ohne Leistungsfaktorkorrektur (PFC) – Referenzdesign TIDM-1022 — Referenzdesign für die Leistungsfaktorkorrektur (PFC) mit Valley-Switching TIDM-DC-DC-BUCK — Referenzdesign für digital geregelten, nicht isolierten DC/DC-Abwärtswandler TIEVM-HV-1PH-DCAC — Entwicklungskit für einphasige Inverter mit Spannungsquellen- und Netzanschlussmodus
Referenzdesign
TIDA-010231 — Analog-Frontend für Lichtbogenerkennung in Photovoltaik-Anwendungen – Referenzdesign TIDA-010087 — Referenzdesign für Batterieprüfgerät mit 100-A-Dual-Phase-Digitalsteuerung
Evaluierungsplatine
TMDSCNCD280025C — TMS320F280025C evaluation module for C2000™ MCU controlCARD™ TMDSCNCD2800157 — TMDSCNCD2800157 controlCARD-Evaluierungsmodul TMDSCNCD28P65X — TMS320F28P65X controlCARD – Evaluierungsmodul TMDSCNCD28P55X — TMDSCNCD28P55X controlCARD – Evaluierungsmodul LAUNCHXL-F28P65X — F28P65x LaunchPad™-Development Kit für C2000™-Echtzeit-MCU LAUNCHXL-F28P55X — LaunchPad-Entwicklungssatz TMS320F28P55x für Echtzeit-MCU C2000 LAUNCHXL-F2800157 — C2000™ Echtzeit MCU F2800157 LaunchPad™-Entwicklungskit
Tochterkarte
TMDSCNCD280039C — TMS320F280039C-Evaluierungsmodul C2000™ MCU controlCARD™™ TMDSCNCD28388D — F28388D evaluation module for C2000™ MCU controlCARD™ TMDSCNCD28379D — F28379D development kit for C2000™ Delfino MCU controlCARD™ TMDSCNCD280049C — F280049C evaluation module for C2000™ MCU controlCARD™
Entwicklungskit
LAUNCHXL-F280025C — F280025C LaunchPad™ development kit for C2000™ real-time MCU LAUNCHXL-F280039C — TMS320F280039C LaunchPad™-Entwicklungskit für C2000™-Echtzeit-MCU LAUNCHXL-F28379D — F28379D LaunchPad™ development kit for C2000™ Delfino™ MCU
Durchsuchen Download-Optionen
IDE, Konfiguration, Compiler oder Debugger

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It comprises a suite of tools used to develop and debug embedded applications.  Code Composer Studio is available for download across Windows®, Linux® and macOS® (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Diese Designressource unterstützt die meisten Produkte in diesen Kategorien.

Informationen zum Support sind der Seite mit den Produktdetails zu entnehmen.
Start Download-Optionen
Support-Software

MATHW-3P-SLEC — MathWorks MATLAB, Simulink, C2000-Mikrocontroller-Blockset und Embedded-Coder

C2000 Microcontroller-Blockset (Link zum Produkt C2000 Microcontroller Blockset – MATLAB (mathworks.com)): Sparen Sie Entwicklungszeit und gehen Sie schneller in die Produktion, indem Sie Model Based Design mit C2000 MCUs und MathWorks Software Tools verwenden.


MATLAB Coder™, Simulink (...)

Von: MathWorks, Inc.
Optionen anzeigen
Simulationsmodell

TMS320F28P55x BSDL Files

SPRM852.ZIP (14 KB) - BSDL Model
Herunterladen
Simulationsmodell

TMS320F28P55x IBIS Model

SPRM853.ZIP (827 KB) - IBIS Model
Herunterladen
Gehäuse Pins Herunterladen
LQFP (PM) 64 Optionen anzeigen
LQFP (PZ) 100 Optionen anzeigen
TQFP (PDT) 128 Optionen anzeigen
VQFN (RSH) 56 Optionen anzeigen
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos