CC2541-Q1
- RF
- 2.4-GHz Low Energy Compliant and Proprietary RF Wireless MCU
- Supports Data Rates of 250 kbps, 500 kbps, 1 Mbps, and 2 Mbps
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent
Receiver Sensitivity (–94 dBm at
1 Mbps), Selectivity, and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- 6 mm × 6 mm QFN-40 Package
- Low Power
- Active-Mode RX Down to: 18.3 mA
- Active-Mode TX (0 dBm): 18.6 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V to 3.6 V)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core With Code Prefetch
- 256KB In-System Programmable Flash
- 8KB of RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment and Address Decoding
- Retention of All Relevant Registers in All Power Modes
- Peripherals
- Powerful Five-Channel DMA
- IR Generation Circuitry
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-Performance Comparator
- Development
Tools
- CC2541 Evaluation Module
- SmartRF™ Software
- IAR Embedded Workbench™ Available
- v4.0 Compliant Protocol Stack for Single-Mode BLE
Solution
- Complete Power-Optimized Stack, Including Controller and
Host
- GAP – Central, Peripheral, Observer, or Broadcaster (Including Combination Roles)
- ATT / GATT – Client and Server
- SMP – AES-128 Encryption and Decryption
- L2CAP
- Sample
Applications and Profiles
- Generic Applications for GAP Central and Peripheral Roles
- Proximity, Accelerometer, Simple Keys, and Battery GATT Services
- More Applications Supported in BLE Software Stack
- Multiple Configuration
Options
- Single-Chip Configuration, Allowing Applications to Run on CC2541-Q1
- Network Processor Interface for Applications Running on an External Microcontroller
- BTool–Windows PC Application for Evaluation, Development, and Test
- Over the Air Update Capable
- Complete Power-Optimized Stack, Including Controller and
Host
The CC2541-Q1 is a power-optimized true Wireless MCU solution for both low energy and proprietary 2.4-GHz applications. This device enables the building of robust nework nodes with low total bill-of-material costs. The CC2541-Q1 combines the excellent performance of a leading RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8KB of RAM, and many other powerful supporting features and peripherals. The CC2541-Q1 is highly suited for systems in which ultralow power consumption is required, which is specified by various operating modes. Short transition times between operating modes further enable low power consumption.
The CC2541-Q1 comes in a 6 mm x 6 mm QFN40 package.
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
CC2541DK-MINI — CC2541 ミニ開発キット
CC-DEBUGGER — デバッガおよびプログラマ、RF システム・オン・チップ用
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
SWRC257 — CC2541/43/44/45 Peripherals Software Examples
BLE-STACK — Bluetooth Low Energy ソフトウェア スタック
ARM® Cortex®-M3 ベースの各種ワイヤレス マイコン (MCU) で構成された TI の SimpleLink™ Bluetooth® Low Energy ファミリのこのロイヤリティ フリーの BLE-Stack には、Bluetooth 4.2 と Bluetooth 5 向けのフル機能の認証済みスタックが付属しているほか、シングル モード Bluetooth Low Energy (BLE) アプリケーションの開発をすぐに開始するのに必要なソフトウェアすべて、サンプル アプリケーション、資料も付属しています。
特長
- Bluetooth 5 で、2Mbps (...)
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
SmartRF Packet Sniffer 2
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet (...)
SWRC251 — CC254x Proprietary Mode Packet Error Rate Test
SWRC258 — BLE Device Monitor (v2.9.0)
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices
SMARTRF-STUDIO-7 — SmartRF スタジオ
SmartRF™ Studio は、RF システムの設計者が TI の CC1xxx と CC2xxx の各低消費電力 RF デバイス全般を設計するプロセスの初期段階で無線を簡単に評価するのに役立つ Windows アプリケーションです。構成レジスタの値とコマンドの生成、さらに RF システムの実用的なテストとデバッグを簡素化できます。
SmartRF Studio は、以下の TI デバイスをサポートしています。
リソース
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimplElink™ CC2xxx デバイス向けハードウェア設計レビュー
SimpleLink ハードウェアの設計レビュー プロセスは、問い合わせの手段を提供します。その後、関連する設計に関するエキスパートと 1 対 1 で連絡、エキスパートはお客様の設計に対するレビューを実施し、役に立つフィードバックをお知らせします。レビューの依頼に関する 3 ステップのシンプルなプロセスと、関連する技術資料やリソースへのリンクは、こちらで見つかります。
開始
2.4GHz ハードウェア設計レビューを依頼する前に、設計に関する一般的な質問は TI の E2E forum に投稿してください。
Hardware Design Review Request Form (...)
CC2541KEYFOB-RD — CC2541 Keyfob リファレンス・デザイン
Bluetooth Smart キーフォブは、ボタン、ブザー、LED、および加速度計を備えた、小型フォーム・ファクタのコインセル駆動モバイル・アクセサリであり、近接およびバッテリ・サービス・プロファイルなどの、複数の BLE GATT サービス・プロファイルの使用例を示します。
TIDA-00358 — 小型フォーム ファクタ Bluetooth 低エネルギ (BLE) リファレンス デザイン
Bluetooth® low energy (BLE) ワイヤレス マイコン (MCU) の CC254x ファミリと、既存の PCB にハンダ付けできるコンパクトな曲折型 F アンテナを組み合わせたリファレンス デザインです。このリファレンス デザインは、BLE ワイヤレス マイコンのすべての I/O ピンにアクセスでき、既存のシステムで BLE コネクティビティの評価が可能です。サンプル アプリケーションを含むロイヤリティ フリーのテキサス インスツルメンツの BLE stack との互換性があり、より迅速な評価が可能です。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN (RHA) | 40 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。