この製品には新バージョンがあります
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
CC2510
- Radio
- High-performance RF transceiver based on the
market-leading CC2500 - Excellent receiver selectivity and blocking
performance - High sensitivity (−103 dBm at 2.4 kBaud)
- Programmable data rate up to 500 kBaud
- Programmable output power up to 1 dBm for all
supported frequencies - Frequency range: 2400 - 2483.5 MHz
- Digital RSSI / LQI support
- High-performance RF transceiver based on the
- Current Consumption
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
TX: 16 mA @ −6 dBm output power) - 0.3 µA in PM3 (the operating mode with the lowest power consumption)
- Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
- MCU, Memory, and Peripherals
- High performance and low power 8051 microcontroller core.
- 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
- Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
- I2S interface
- 7 12 bit ADC with up to eight inputs
- 128-bit AES security coprocessor
- Powerful DMA functionality
- Two USARTs
- 16-bit timer with DSM mode
- Three 8-bit timers
- Hardware debug support
- 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
- General
- Wide supply voltage range (2.0V - 3.6V)
- Green package: RoHS compliant and no antimony or bromine,
6×6mm QFN 36
The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.
The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
RDCR-3P-RADIO-MOD — Radiocrafts Embedded radio modules
CC-DEBUGGER — デバッガおよびプログラマ、RF システム・オン・チップ用
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
SWRC085 — CC1110/CC2510 Example Software Supported on IAR Embedded Workbench
SWRC117 — CC1110, CC2510 Basic Software Examples
SWRC133 — CC1110 and CC2510 Mini DK Software Example
SIMPLICITI — SimpliciTI 準拠のプロトコル・スタック
注: 最新情報に含まれている「リリース・ノート」を必ずお読みください。
SimpliciTI は、小規模な(256 未満)RF ネットワークを対象にした、シンプルなローパワー RF (...)
SWRC058 — CC2510 Example Library
SWRC088 — CC USB Firmware Library and Examples
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
SmartRF Packet Sniffer 2
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet (...)
SWRC046 — SmartRF(TM) Studio 6.13.1
SWRC062 — CC2511 USB-Dongle Reference Design 1.1
SMARTRF-STUDIO-7 — SmartRF スタジオ
SmartRF™ Studio は、RF システムの設計者が TI の CC1xxx と CC2xxx の各低消費電力 RF デバイス全般を設計するプロセスの初期段階で無線を簡単に評価するのに役立つ Windows アプリケーションです。構成レジスタの値とコマンドの生成、さらに RF システムの実用的なテストとデバッグを簡素化できます。
SmartRF Studio は、以下の TI デバイスをサポートしています。
リソース
3P-WIRELESS-MODULES — サードパーティ無線モジュール検索ツール
サード パーティーのワイヤレス モジュール検索ツールを使用すると、開発中の最終製品の仕様を満たす製品を特定し、製造に対応したワイヤレス モジュールを調達することができます。この検索ツールに掲載されているサード パーティーのモジュール ベンダ各社は、TI のワイヤレス コネクティビティ製品を活用したワイヤレス モジュールの設計や製造に関する専門知識がある独立系サード パーティー企業です。
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimplElink™ CC2xxx デバイス向けハードウェア設計レビュー
SimpleLink ハードウェアの設計レビュー プロセスは、問い合わせの手段を提供します。その後、関連する設計に関するエキスパートと 1 対 1 で連絡、エキスパートはお客様の設計に対するレビューを実施し、役に立つフィードバックをお知らせします。レビューの依頼に関する 3 ステップのシンプルなプロセスと、関連する技術資料やリソースへのリンクは、こちらで見つかります。
開始
2.4GHz ハードウェア設計レビューを依頼する前に、設計に関する一般的な質問は TI の E2E forum に投稿してください。
Hardware Design Review Request Form (...)
CC2510EM_REFDES — CC2510EM リファレンス デザイン
CC2510EM リファレンス デザインには、CC2510-CC2511DK 開発キットで使用する CC2510EM 評価基板に対応した回路図とレイアウト ファイルが付属しています。
また、このリファレンス デザインは、CC2510 のデカップリングと RF レイアウトに関するいくつかの良好な手法を提示します。最適な RF 性能を実現するには、これらのパーツを正確にコピーする必要があります。これは、ディスクリート バランと SMA アンテナ コネクタを採用した 2 層のリファレンス デザインであり、シングル エンドの 50Ω アンテナ向けの設計を採用しています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN (RHH) | 36 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。