3D DMD 機械幾何
產品規格表
DLP9500UV
- 0.95-Inch diagonal micromirror array
- 1920 × 1080 array of aluminum, micrometer-sized mirrors (1080p resolution)
- 10.8µm micromirror pitch
- ±12° micromirror tilt angle (relative to flat state)
- Designed for corner illumination
- Designed for use with UV light (363nm to 420nm):
- Window transmission 98% (Single Pass, Through Two Window Surfaces) (nominal)
- Micromirror reflectivity 88% (Nominal)
- Array diffraction efficiency 85% (Nominal)
- Array fill factor 94% (Nominal)
- Four 16-bit, low-voltage differential signaling (LVDS), double data rate (DDR) input data buses
- Up to 400MHz input data clock rate
- 42.2mm × 42.2mm × 7mm package footprint
- Hermetic package
DLP9500UV is a digitally controlled micro-electromechanical system (MEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP9500UV can be used to modulate the amplitude, direction, and/or phase of incoming light.
The DLP95000UV chipset is a new digital micromirror device (DMD) addition to the DLP Discovery™ 4100 platform, which enables high resolution and high-performance spatial light modulation beyond the visible spectrum into the UVA spectrum (363nm to 420nm). The DLP9500UV DMD is designed with a special window that is optimized for UV transmission.
The DLP9500UV is the 0.95 1080p DMD, with a hermetic package, that is sold with a dedicated DLPC410 controller required for high-speed pattern rates of >23000Hz (1-bit binary) and >1700Hz (8-bit gray), one unit DLPR410 (DLP Discovery 4100 Configuration PROM), and two units DLPA200 (DMD micromirror drivers). Refer to the DLPC410, DLPA200, DLPR410, and DLP9500UV Functional Block Diagram.
Reliable function and operation of the DLP9500UV requires that it be used in conjunction with the other components of the chipset. A dedicated chipset provides developers with easier access to the DMD as well as high-speed, independent micromirror control.
DLP9500UV is a digitally controlled micro-electromechanical system (MEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP9500UV can be used to modulate the amplitude, direction, and/or phase of incoming light.
您可能會感興趣的類似產品
功能與所比較的裝置相似
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 16 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DLPLCR95UVEVM — DLP9500UV DMD 評估板
此 DLP 評估模組 (EVM) 內建 DLP9500UV，是一款 0.95 UV 1080p 2x LVDS A 型 DMD，適用於使用 363 – 420 nm 紫外線 (UV) 照明光源的應用。DLPLCR95UVEVM 內含超過兩百萬微鏡片，是一款便利的高解析度系統設計選擇，適合微影、3D 列印、標記、燒蝕和其他 UV 光曝光應用。與 DLPLCRC410EVM 配對時，使用者可透過高達 23,148 Hz 的 1 位元模式速率掌控像素準確度。
開發板
DLPLCRC410EVM — DLPLCRC410 評估模組
DLPLCRC410EVM 是一個評估平台，與其他五種 DMD 架構的 EVM 之一搭配使用，可為微影、3D 列印 (SLS 和 SLA)、機器視覺以及標記和編碼等應用展示先進的光學控制。此 EVM 可評估新客戶照明光源、光學元件、演算法和曝光程序，以加快 DLP 技術的潛在評估、客戶學習週期與上市時間。
開發板
DLI-3P-DLI41XX — 用於 DLP Discovery 晶片組的 DLi D4100、D4120、D4130 開發套件
DLi kits for DLP® Discovery™ chipsets (DLPC410 with DLP7000, DLP7000UV, DLP9500 or DLP9500UV DMDs) support custom interface development for industrial and medical systems and instrumentation. Choose among kit options based on desired hardware and software support. DLi4120 kits include (...)
開發板
VISI-3P-LRS-HD-UV — Visitech LUXBEAM 快速系統 HD UV
The LUXBEAM® Rapid System LRS-HD is a DLP® technology based stereolithography sub-system, specifically designed for single head scrolling motion 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9500 chip, the LRS-HD variants UV, Hybrid (HY), (...)
從：VISITECH
開發板
VISI-3P-LRS-MCX-HD-UV — Visitech LUXBEAM 快速系統 MCx HD UV
Offering the same performance as the LRS-HD light engines, the LUXBEAM® Rapid System LRS-MCx offers stackability of modules for stitched images down to 50 micron pixel pitch in image. This allows for highest manufacturing throughput for 3D printing with single pass linear motion systems. (...)
從：VISITECH
開發板
WDST-3P-W4100 — Wintech W4100 高速開發套件
The Wintech W4100 development kit provides users with an alternative to Texas Instruments DLP® Discovery™ 4100 development platform. It utilizes the same FPGA platform and same data interfaces for frame rates up to 32,552 Hz and grayscale operation. The W4100 is compatible with the (...)
開發套件
VIALUX-3P-V-MODULES-410 — 適用於 DLPC410 的 ViALUX V 模組
ViALUX V 模組為完整子系統，內含 DLPC410 的控制器電路板、數位微鏡裝置 (DLP650LNIR、DLP7000、DLP7000UV、DLP9500、DLP9500UV)，以及經過實證的 ALP 控制器套件軟體。工業級模組支援高性能像素級控制，可立即使用。這些 DLP® 子系統專爲新興應用而設計，具備功能豐富的編程介面，可讓新產品快速上市。V 模組具有不同的介面 (USB 2.0、USB 3.0 和 PCIe)，且形狀和尺寸各不相同。
從：ViALUX
光學模組
VIALUX-3P-DLP9500UV-I — 適合使用 DLP9500UV 之工業的 ViALUX GmbH 光學模組
ViALUX GmbH 是獨立的第三方公司，擁有設計和製造光學模組 (包含數位微鏡裝置、照明光源、光學元件和相關機械的精巧組件) 的專業知識，並且適用於使用 DLP9500UV 的工業應用。光學模組及其規格均由第三方公司生產和管理，而非德州儀器，因此預期此清單中所包含的模組目前正由第三方公司生產。
從：ViALUX
光學模組
VISI-3P-LITHOGRAPHY — VISITECH LUXBEAM 微影系統
LUXBEAM LITHOGRAPHY SYTEMS (LLS) is a sub system for direct imaging lithography machines including fully automated in-line machines for 24/7 manufacturing. The system comes with a documented interface and on-site support for easy hardware and software integration. Several photo head options are (...)
從：VISITECH
光學模組
VISI-3P-LUXBEAM-RAPID — Visitech Luxbeam® 快速系統 LRS
The LUXBEAM RAPID SYSTEM LRS-UV/HY/VIS is a 3D printer subsystem with flexible build area and high throughput, high resolution manufacturing. It enables smart functions such as sub-pixelation (SPX) for resolution enhancement, and pixel power control (PPC) to equalize energy per pixel. It also (...)
從：VISITECH
光學模組
VISI-3P-LUXBEAM4600 — VISITECH LUXBEAM 4600 DLP 格式器板
The LUXBEAM 4600 serves high-speed industrial applications requiring high resolution, fast frame rates, and single pixel control. It includes a DMD board connected with a flex cable and VISITECH’s LUXWARE firmware for memory management, sequencing and I/O signaling. The board also has a (...)
從：VISITECH
應用軟體及架構
VIALUX-3P-ALP-4 — 用於 DLPLCRC410 的 ViALUX ALP-4.1 控制器軟體套件評估模組
ViALUX’ ALP-4.1 is an accessory software package compatible with the DLPLCRC410 evaluation module from Texas Instruments. It supports the built-in hardware components and contains the corresponding driver and controller firmware as well as ViALUX’ FPGA logic design for the EVM board. (...)
從：ViALUX
CAD/CAE 符號
DLP9000 DLP9500 Type A Mounting Concept with Tight Part Tolerances (Rev. A)
DLPR014A.ZIP (1002 KB)
計算工具
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
DMD 安裝設計
DLPR106 — TypeA 9Size Traditional DMD Mounting and Electrical Interconnect Information
支援產品和硬體
設計工具
DLI-3P-ACCESSORIES — 適用於 DLP® 產品的 DLi 配件和組件
Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
- (...)
設計工具
DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
設計工具
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
模擬工具
DLPR410-IBIS — DLPR410 IBIS 機型
IBIS file for the DLPR410 PROM device which supports the DLPC410, DLP650LNIR, DLP7000, DLP7000UV, DLP9500 and DLP9500UV.
從：Xilinx
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DLP-TYPEA.9 (FLN) | 355 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點