Product details

Vin (Min) (V) 3 Vin (Max) (V) 65 Features Enable, Linear control, Reverse current blocking, Reverse polarity protection Iq (Typ) (mA) 0.032 Iq (Max) (mA) 0.038 IGate source (Typ) (uA) 69 IGate sink (Typ) (mA) 2.1 IGate pulsed (Typ) (A) 2.1 Operating temperature range (C) -40 to 125 VSense reverse (Typ) (mV) -6.5 Design support EVM Rating Automotive Channel(s) controlled (#) 1 FET External VGS (Max) (V) 13
Vin (Min) (V) 3 Vin (Max) (V) 65 Features Enable, Linear control, Reverse current blocking, Reverse polarity protection Iq (Typ) (mA) 0.032 Iq (Max) (mA) 0.038 IGate source (Typ) (uA) 69 IGate sink (Typ) (mA) 2.1 IGate pulsed (Typ) (A) 2.1 Operating temperature range (C) -40 to 125 VSense reverse (Typ) (mV) -6.5 Design support EVM Rating Automotive Channel(s) controlled (#) 1 FET External VGS (Max) (V) 13
WSON (DRR) 12 9 mm² 3 x 3
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • 3-V to 65-V input range
  • Reverse input protection down to –65 V
  • Low quiescent current 35 µA (max) in operation
  • Low 3.3-µA (max) shutdown current (EN = Low)
  • Ideal diode operation with 13-mV A to C forward voltage drop regulation
  • Drives external back-to-back N-Channel MOSFETs
  • Integrated 30-mA boost regulator
  • Active rectification up to 200 KHz
  • Fast response to reverse current blocking: 0.5 µs
  • Fast forward GATE turn ON delay: 0.8 µs
  • Adjustable overvoltage protection
  • Meets automotive ISO7637 transient requirements with a suitable TVS diode
  • Available in space saving 12-pin WSON package
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • 3-V to 65-V input range
  • Reverse input protection down to –65 V
  • Low quiescent current 35 µA (max) in operation
  • Low 3.3-µA (max) shutdown current (EN = Low)
  • Ideal diode operation with 13-mV A to C forward voltage drop regulation
  • Drives external back-to-back N-Channel MOSFETs
  • Integrated 30-mA boost regulator
  • Active rectification up to 200 KHz
  • Fast response to reverse current blocking: 0.5 µs
  • Fast forward GATE turn ON delay: 0.8 µs
  • Adjustable overvoltage protection
  • Meets automotive ISO7637 transient requirements with a suitable TVS diode
  • Available in space saving 12-pin WSON package

The LM74722-Q1 ideal diode controller drives and controls external back-to-back N-Channel MOSFETs to emulate an ideal diode rectifier with power path ON/OFF control and overvoltage protection. The wide input supply of 3 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs. The device can withstand and protect the loads from negative supply voltages down to –65 V. An integrated ideal diode controller (GATE) drives the first MOSFET to replace a Schottky diode for reverse input protection and output voltage holdup. A strong boost regulator with fast turn ON/OFF comparators ensures robust and efficient MOSFET switching performance during automotive testing, such as ISO16750 or LV124, where an ECU is subjected to input short interruptions and AC superimpose input signals up to 200-kHz frequency. Low quiescent current 35-µA (maximum) in operation enables always ON system designs. With a second MOSFET in the power path, the device allows load disconnect control using EN pin. Quiescent current reduces to 3.3-µA (maximum) with EN low. The device features an adjustable overvoltage cut-off protection feature for load dump protection.

The LM74722-Q1 ideal diode controller drives and controls external back-to-back N-Channel MOSFETs to emulate an ideal diode rectifier with power path ON/OFF control and overvoltage protection. The wide input supply of 3 V to 65 V allows protection and control of 12-V and 24-V automotive battery powered ECUs. The device can withstand and protect the loads from negative supply voltages down to –65 V. An integrated ideal diode controller (GATE) drives the first MOSFET to replace a Schottky diode for reverse input protection and output voltage holdup. A strong boost regulator with fast turn ON/OFF comparators ensures robust and efficient MOSFET switching performance during automotive testing, such as ISO16750 or LV124, where an ECU is subjected to input short interruptions and AC superimpose input signals up to 200-kHz frequency. Low quiescent current 35-µA (maximum) in operation enables always ON system designs. With a second MOSFET in the power path, the device allows load disconnect control using EN pin. Quiescent current reduces to 3.3-µA (maximum) with EN low. The device features an adjustable overvoltage cut-off protection feature for load dump protection.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet LM74722-Q1 Low IQ Ideal Diode Controller With 200-KHz Active Rectification and Load Dump Protection datasheet 23 Sep 2021
Technical article 3 ways to design a low quiescent-current (Iq) automotive reverse battery protection system 18 Nov 2021
Application note Basics of Ideal Diodes (Rev. B) 05 Oct 2021
Application note Active Rectification and its Advantages in Automotive ECU Designs 29 Sep 2021
User guide LM7472EVM: Evaluation Module for LM74720-Q1 & LM74722-Q1 Ideal Diode Controllers 15 Sep 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LM7472EVM — LM74720-Q1 and LM74722-Q1 evaluation module for ideal diode controllers

TI's Evaluation Module LM7472EVM helps designers evaluate the operation and performance of the LM74720-Q1 and LM74722-Q1 ideal diode controllers in reverse battery protection applications. This evaluation module demonstrates how LM7472x-Q1 with integrated boost regulator for Low Iand fast (...)

In stock
Limit: 5
Simulation model

LM7472x-Q1 PSpice Transient Model

SLVMDO2.ZIP (84 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
WSON (DRR) 12 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos