Inicio Conectividad inalámbrica Otros productos inalámbricos
Inicio
Conectividad inalámbrica
Otros productos inalámbricos

CC2511

ACTIVO

Transceptor de radio de 2,4 GHz, MCU 8051, memoria Flash de 16 KB o 32 KB e interfaz USB de velocida

Haga su pedido ahora
Hoja de datos
Errata

CC2511

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Frequency range 2400-2483.5 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -50 to 150 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
Frequency range 2400-2483.5 MHz Standard Proprietary 2.4 GHz Operating temperature range (°C) -50 to 150 Rating Catalog Transmission principle 2-FSK, GFSK, MSK
VQFNP (RSP) 36 36 mm² 6 x 6
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC2500
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (−103 dBm at 2.4 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 1 dBm for all
      supported frequencies
    • Frequency range: 2400 - 2483.5 MHz
    • Digital RSSI / LQI support
  • Current Consumption
    • Low current consumption (RX: 17.1 mA @ 2.4 kBaud,
      TX: 16 mA @ −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller core.
    • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
    • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
    • I2S interface
    • 7 – 12 bit ADC with up to eight inputs
    • 128-bit AES security coprocessor
    • Powerful DMA functionality
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
  • General
    • Wide supply voltage range (2.0V - 3.6V)
    • Green package: RoHS compliant and no antimony or bromine,
      6×6mm QFN 36

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.
filter Buscar otro/a Otros productos inalámbricos
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 31
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet Low-Power SoC (System-on-Chip) with MCU, memory, 2.4 GHz RF Transceiver, and USB datasheet (Rev. G) 07 mar 2013
* Errata CC2510Fx, CC2511Fx Silicon Errata (Rev. D) 14 ago 2015
Application note DN507 -- FEC Decoding 21 mar 2019
Application note CRC Implementation (Rev. E) PDF | HTML 27 sep 2018
Application note Using AES Encryption in CC111xFx and CC251xFx (Rev. C) 13 mar 2015
Application note DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) 21 mar 2012
Application note AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) 08 sep 2011
Application note AN099 - Wireless Microphone with USB Interface 01 jun 2011
Application note DN034 -- YAGI 2.4 GHz PCB Antenna 14 oct 2010
Application note AN058 -- Antenna Selection Guide (Rev. B) 06 oct 2010
Application note DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 26 ago 2010
Application note DN505 -- RSSI interpretation and timing (Rev. D) 16 jun 2010
Application note DN509 -- Data Whitening and Random TX Mode 12 abr 2010
Application note DN107 -- DMA and Radio Configuration (Rev. A) 17 dic 2009
Application note DN117 -- SimpliciTI-compatible UART Driver 22 sep 2009
Application note AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 16 sep 2009
Application note DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) 11 ago 2009
Application note DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) 11 ago 2009
Application note DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices 03 ago 2009
User guide CC1111/CC2511 USB HW User's Guide (Rev. B) 31 jul 2009
Application note DN115 -- Using PWM for Dimmer Function in LED Lighting 16 jun 2009
Application note DN111 - Current Consumption for a Polling Receiver (Rev. A) 24 mar 2009
Application note DN300 -- SmartRF04EB Troubleshooting (Rev. B) 24 mar 2009
Application note AN043 -- Small Size 2.4 GHz PCB Antenna (Rev. D) 04 abr 2008
Application note DN021 - CC2500 and CC2510 Sensitivity versus Frequency Offset and Crystal Accura 10 mar 2008
Application note AN048 -- 2.4GHz Chip Antenna (Rev. B) 04 mar 2008
Application note DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) 22 oct 2007
Application note DN102 -- SoC Temperature Sensor (Rev. A) 22 oct 2007
Application note DN504 -- FEC Implementation (Rev. A) 22 oct 2007
Application note DN004 Folded Dipole Antenna for CCC25xx 05 dic 2006
More literature CC2511 RoHS Confirmation 27 oct 2006

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BOOSTXL-CC1120-90 — BoosterPack para aplicaciones de 902 MHz a 928 MHz

El módulo BoosterPack™ CC1120-CC1190 está diseñado para utilizarse con los kits de desarrollo LauchPad™ MSP-EXP430F5529 y MSP-EXP430G2553. Además, funcionan como módulo independiente con el uso del software de aplicación SmartRF Studio.  El módulo está equipado con una antena de trazado con PCB (...)

No disponible en TI.com
Placa de evaluación

BOOSTXL-CC1125 — BoosterPack para aplicaciones de 868/915 MHz CC1125

El módulo BoosterPack™ CC1125 está diseñado para utilizarse con los kits de desarrollo LaunchPad MSP-EXP430F5529 y MSP-EXP430G2553. Además, funciona como módulo independiente con el uso del software de aplicación SmartRF Studio.  El módulo cuenta con una antena de trazado con PCB integrada que (...)

No disponible en TI.com
Sonda de depuración

CC-DEBUGGER — Depurador y programador para sistema en chips RF

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)

Guía del usuario: PDF
No disponible en TI.com
Controlador o biblioteca

SIMPLICITI — Pila de protocolos compatibles con SimpliciTI

SimpliciTI is a simple low-power RF network protocol aimed at small RF networks. SimpliciTI was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1XXX/CC25XX/CC430 transceivers and SoCs.

Small RF networks (...)
View Options
Firmware

SWRC088 — CC USB Firmware Library and Examples

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
IDE, configuración, compilador o depurador

SWRC216 — CCUSB2 IAR workspace

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
IDE, configuración, compilador o depurador

SWRC217 — CC1110_AIC3104_16kHz16bits_96 IAR workspaces

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Soporte de software

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Soporte de software

SWRC062 — CC2511 USB-Dongle Reference Design 1.1

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Soporte de software

SWRC143 — CC2511 Reference Design

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Símbolo CAD/CAE

AN099_CAD_Files

SWRC218.ZIP (1714 KB)
Descargar
Herramienta de cálculo

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)

Productos y hardware compatibles

Productos y hardware compatibles
Opciones de descarga
Herramienta de diseño

SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos SimpleLink™ CC2xxx

El proceso de revisión del diseño de hardware de SimpleLink le ofrece la posibilidad de ponerse en contacto, de forma personalizada, con un experto en la materia que puede ayudarlo a revisar su diseño y proporcionarle valiosos comentarios. Aquí encontrará un sencillo proceso de 3 pasos para (...)
View Options
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFNP (RSP) 36 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos