LMK04832SEPEVM
초저 잡음, 3.2GHz, 15 출력, 클록 지터 클리너용 LMK04832-SEP 평가 모듈
LMK04832SEPEVM
개요
LMK04832-SEP 평가 모듈(EVM)은 우주 항공 등급 초저잡음, JESD204B/C, 듀얼 루프 클록 지터 클리너인 LMK04832-SEP의 성능과 기능을 평가하는 플랫폼입니다.
각 EVM의 LMK04832-SEP 디바이스는 엔지니어링 평가 전용으로 설계된 엔지니어링 모델입니다. 이 디바이스와 EVM은
자격, 생산, 방사선 테스트 또는 비행 용도로 적합하지 않습니다.
특징
- SEL(단일 이벤트 래치업) 및 SEFI(단일 이벤트 기능 인터럽트) 내성 > 43MeV.cm2/mg
- 시스템 레퍼런스(SYSREF)가 필요한 우주 애플리케이션에 대해 JESD204B/C 지원
- 6GHz 외부 VCO(전압 제어 오실레이터) 또는 분배 입력
- 다중 모드
- 듀얼 위상 동기 루프(PLL)
- 단일 PLL
- 클록 분배
- 성능에 맞게 최적화 및 테스트된 듀얼 루프 클록 지터 클리너에 대한 전체 회로
클록 지터 클리너
주문 및 개발 시작
평가 보드
LMK04832SEPEVM — LMK04832-SEP evaluation module for ultra-low-noise, 3.2-GHz, 15-output, clock jitter cleaner
LMK04832SEPEVM — LMK04832-SEP evaluation module for ultra-low-noise, 3.2-GHz, 15-output, clock jitter cleaner
지원 소프트웨어
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.7.6 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
TICS Pro 1.7.7.6 Software Manifest
TICS Pro 1.7.7.6 Release Notes
출시 정보
Added Features
LMK5Bxxyyy, LMK5Cxxyyy
- Warnings and errors improved, particularly corrective suggestions
- REFx_FREQ=0 automatically disables DPLL reference input selection for that input
- Input validation enabled and disabled by start page settings, including 1PPS
- APLL reference selection moved to Step 5, just before clock output definition
- Quick-set multiple outputs to the same settings on frequency planner
- BAW VCO allows some ppm deviation
- Force SYSREF option on OUT0/1
- Expose DPLLx_LCK_TIMER field
- Match LMK05318B EEPROM page design
- .EPR export option
- EEPROM SRAM programming generation support
- For complete changelist, see release notes
LMK3H0102
- Configuration search tool
- Wizard: voltage selection option
Bug Fixes
- LMK04832-SP, LMK04832-SEP, LMK04714-Q1, LMK04368-EP - PD_FIN0 corrected to FIN0_PD
- LMK3H0102 - Several wizard bugfixes
Known Issues
- LMK5C33216 - When cascading from VCO3 to DPLL input, the divide value must manually be entered into DPLLx_REF5_RDIV as ( VCO3 output frequency / DPLLx TDC frequency )
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
기술 자료
=
TI에서 선정한 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | EVM User's guide | LMK04832SEPEVM User’s Guide | PDF | HTML | 2022. 9. 28 | |
| 인증서 | LMK04832SEPEVM EU RoHS Declaration of Conformity (DoC) | 2022. 9. 6 |