LMK03806BEVAL
LMK03806B 평가 보드
LMK03806BEVAL
개요
LMK03806 평가 보드를 사용하면 LMK03806 초저지터 클록 발생기의 기능 및 성능 검증이 가능합니다.
특징
- 차동 출력을 통한 저지터 클록 생성
- 선택 가능한 차동 출력 유형(LVPECL, LVDS, LVCMOS), uWire 제어를 통해 클록 출력 쌍당 선택 가능
- 크리스탈 오실레이터 인터페이스 및 버퍼 오실레이터 출력
- 온보드 레귤레이터 옵션을 사용한 단일 3.3V 작동 또는 직접 공급 입력
- 제어된 임피던스 트레이스 및 에지 SMA 커넥터를 통한 유연한 입력/출력 인터페이스
목차:
- LMK03806EVAL
- LMK03806 사용자 가이드
클록 생성기
시작하기
- LMK03806BEVAL 주문
- TICSPRO-SW 다운로드 및 설치
- LMK03806BEVAL 사용 설명서 읽기
- TICSRPRO-SW에 레지스터 구성
주문 및 개발 시작
평가 보드
LMK03806BEVAL/NOPB — LMK03806B Evaluation Board
LMK03806BEVAL/NOPB — LMK03806B Evaluation Board
소프트웨어 프로그래밍 도구
CODELOADER — CodeLoader Device Register Programming v4.19.0
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
CODELOADER — CodeLoader Device Register Programming v4.19.0
제품
RF PLL 및 신시사이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
출시 정보
The design resource accessed as www.ti.com/lit/zip/snac014 or www.ti.com/lit/xx/snac014e/snac014e.zip has been migrated to a new user experience at www.ti.com/tool/download/SNAC014. Please update any bookmarks accordingly.
지원 소프트웨어
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
반도체
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
반도체
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
출시 정보
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
새 소식
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
기술 자료
=
TI에서 선정한 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
| 유형 | 직함 | 최신 영어 버전 다운로드 | 날짜 | ||
|---|---|---|---|---|---|
| * | EVM User's guide | LMK03806B Evaluation Board User Guide (Rev. A) | 2013. 11. 26 | ||
| 인증서 | LMK03806BEVAL/NOPB EU Declaration of Conformity (DoC) | 2019. 1. 2 |