XMICR-3P-LMX2492
개요
X-MWblocks consist of RF and Microwave “Drop-In” components that can be used individually for prototyping or in production assemblies. X-MWblocks are easy to test, integrate, align, and configure to 60 GHz and beyond. No messy Sweat Soldering or Silver Epoxy processes are required. X-MWblocks are highly characterized with S-Parameter models and connect with a patented solder-less interconnect technology.
This X-MWblock incorporates the LMX2492 phased lock loop. The LMX2492 is a 500MHz to 14GHz wideband, low noise fractional-N PLL with ramp/chirp generation capability.
RF PLL 및 신시사이저
주문 및 개발 시작
XM-C6K5-0409D — Phase lock loops
XM-C6K5-0409D — Phase lock loops
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
제품
RF PLL 및 신시사이저
오실레이터
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
출시 정보
Added cascaded phase noise analysis
새 소식
- Added cascaded phase noise analysis
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.7.6 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
TICS Pro 1.7.7.6 Software Manifest
TICS Pro 1.7.7.6 Release Notes
출시 정보
Added Features
LMK5Bxxyyy, LMK5Cxxyyy
- Warnings and errors improved, particularly corrective suggestions
- REFx_FREQ=0 automatically disables DPLL reference input selection for that input
- Input validation enabled and disabled by start page settings, including 1PPS
- APLL reference selection moved to Step 5, just before clock output definition
- Quick-set multiple outputs to the same settings on frequency planner
- BAW VCO allows some ppm deviation
- Force SYSREF option on OUT0/1
- Expose DPLLx_LCK_TIMER field
- Match LMK05318B EEPROM page design
- .EPR export option
- EEPROM SRAM programming generation support
- For complete changelist, see release notes
LMK3H0102
- Configuration search tool
- Wizard: voltage selection option
Bug Fixes
- LMK04832-SP, LMK04832-SEP, LMK04714-Q1, LMK04368-EP - PD_FIN0 corrected to FIN0_PD
- LMK3H0102 - Several wizard bugfixes
Known Issues
- LMK5C33216 - When cascading from VCO3 to DPLL input, the divide value must manually be entered into DPLLx_REF5_RDIV as ( VCO3 output frequency / DPLLx TDC frequency )
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
관련 설계 리소스
하드웨어 개발
평가 보드
소프트웨어 개발
애플리케이션 소프트웨어 및 프레임워크
지원 및 교육
비디오 시리즈
모든 비디오 보기동영상
고지 사항
위의 특정 정보 및 리소스(비-TI 사이트 링크 포함)는 타사 파트너가 제공할 수 있으며 편의를 위해 여기에 포함되어 있습니다. TI는 이러한 정보 및 리소스의 콘텐츠를 제공할 책임이 없으며, 의도한 용도 및 사용자를 대신하여 신중하게 평가해야 합니다. 이러한 정보 및 리소스를 여기에 포함한다는 것은 TI가 타사를 보증한다는 의미가 아니며, 타사 제품 또는 서비스의 적합성과 관련된 보증이나 표현으로 해석해서는 안 됩니다.