LMX2572LPEVM
FSK 모듈레이션을 지원하는 2GHz 저전력 광대역 RF 신시사이저 평가 모듈
LMX2572LPEVM
개요
이 EVM(평가 모듈)은 내부 더블러를 사용하지 않고 12.5MHz~2GHz의 주파수를 생성할 수 있는 저전력 고성능 광대역 신시사이저인 LMX2572LEVM에 사용됩니다. PLL은 단일 3.3V 전원에서 70mA의 전력만 소비하면서 탁월한 성능을 제공합니다. 동기화 신호를 제공하여 사용자가 여러 LMX2572LP 장치 간에 출력 위상을 동기화할 수 있습니다. LMX2572LP는 이 평가 모듈에서 시연할 수 있는 주파수 램프도 생성할 수 있습니다. 또한 LMX2572LP는 직접 디지털 FSK 모듈레이션을 지원합니다. 직렬 인터페이스는 이러한 목적을 위해 SPI 또는 I2S 인터페이스로 구성할 수 있습니다. 모든 Refernce PRO 모듈은 깔끔한 참조 클록을 제공하고 LMX2572LP 평가 모듈을 프로그래밍하는 데 사용됩니다.
특징
- 12.5MHz~2GHz 출력 주파수
- 800MHz 캐리어가 있는 100kHz 오프셋에서 -124dBc/Hz 위상 잡음
- 한 개의 직접 VCO 출력으로 70mA 작동 전류
- 프로그래머블 출력 전원을 지원하는 2개의 차동 출력
- 이 EVM은 신시사이저에 대한 완벽한 회로를 가지고 있으며, 성능을 최적화하고, 테스트했으며, USB 프로그래밍 모듈을 포함하고 있습니다
Reference PRO(SV601349) IDC 케이블(M3DDA-1006J) USB 케이블(Q362-ND) 2x SMA 어댑터(132168)
RF PLL 및 신시사이저
시작하기
- LMX2572LPEVM 주문
- Ticspro-SW 및 PLLATINUMSIM-SW 다운로드 및 설치
- LMX2572LPEVM 사용 설명서 읽기
- TICSPRO-SW에 레지스터를 구성하고 PLLATINUMSIM-SW에서 성능 시뮬레이션
주문 및 개발 시작
LMX2572LPEVM — 2-GHz Low Power Wideband RF Synthesizer with FSK Modulation Evaluation Module
LMX2572LPEVM — 2-GHz Low Power Wideband RF Synthesizer with FSK Modulation Evaluation Module
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
출시 정보
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
새 소식
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
기술 자료
| 유형 | 직함 | 최신 영어 버전 다운로드 | 날짜 | ||
|---|---|---|---|---|---|
| * | EVM User's guide | LMX2572LPEVM Evaluation Instructions | 2018. 5. 24 | ||
| 인증서 | LMX2572LPEVM EU Declaration of Conformity (DoC) | 2019. 1. 2 |