FPD-Link III deserializer evaluation module
DS90UB914A-CXEVM
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
This product has been released to the market and is available for purchase. For some products, newer alternatives may be available.
Description
The DS90UB914A_CXEVM evaluation module (EVM) helps you evaluate the operation and performance of the DS90UB914A-Q1 25-MHz to 100-MHz FPD-Link III deserializer (DES). The device translates a high-speed serialized FPD-Link III interface transported over a single 50-Ω coax cable into 10 or 12 bits of LVCMOS data.
The DS90UB914A-CXEVM board features an SMB at the FPD-Link III input and a 0.1-inch IDC connector interface connector for the LVCMOS outputs.
Included with the EVM is a USB2ANY interface adaptor. The USB2ANY interface adaptor can be used to communicate with the DS90UB914A-CXEVM board or a paired serializer through I2C. This adaptor dongle connects to a PC through a standard USB interface and should be used in conjunction with our analog framework utility for the TI LaunchPad™ development kit (ALP) software.
The EVM has one deserializer device and one USB2ANY dongle.
Features
- Programmable data payload: 10-bit payload up to 100 MHz; 12-bit payload up to 75 MHz
- PCLK from imager or external oscillator mode
- Continuous low-latency bidirectional control interface channel with I2C support at 400 KHz
- Four dedicated general-purpose input-outputs (GPIOs)
