The Texas Instruments DS90UB940-Q1EVM evaluation module (EVM) converts FPD-Link III to MIPI CSI-2.
This kit will demonstrate the functionality and operation of the DS90UB940-Q1. The DS90UB940-Q1 is a FPD-Link III Deserializer which, in conjunction with the DS90UB949/929/947-Q1 Serializers, it recovers the data from one or two FPD-Link III serial streams and translates it into Camera Serial Interface (CSI-2) format compatible with Mobile Industry Processor Interface (MIPI) specifications. It supports video resolutions up to WUXGA and 1080p60 with 24-bit color depth.
The recovered data is packetized and serialized over four CSI-2 data lanes strobed by a half-rate serial clock compliant with the MIPI DPHY / CSI-2 specifications, each lane running up to 1.3 Gbps. The CSI-2 output serial bus greatly reduces the interconnect and signal count to a graphic processing unit (GPU) and eases system designs for video streams from multiple automotive driver assist cameras.
The FPD-Link III interface supports video and audio data transmission and full duplex control, including GPIOs, I2C, and SPI communication, over the same differential link. In backward compatible mode, the device supports up to WXGA and 720p resolutions with 24-bit color depth over a single differential link.
The device supports up to 7.1 audio channels. Audio data received from the FPD-Link III stream is decrypted and regenerated up to 8-channel I2S interface with maximum bit rate of 192 kHz.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | EVM User's guide | DS90Ux940-EVM User’s Guide | 23 Jun 2014 | |
| Certificate | DS90UB940-Q1EVM EU Declaration of Conformity (DoC) | 02 Jan 2019 |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.