Home Schnittstelle Highspeed-SerDes V3Link-SerDes
Home
Schnittstelle
Highspeed-SerDes
V3Link-SerDes

TDES9640

AKTIV

Deserialisierer-Vierfach-Hub, MIPI® CSI-2 V³Link™, 7,55 Gbit/s, für Highspeed-Sensoren

Jetzt bestellen
Datenblatt

TDES9640

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Applications Camera SerDes Color depth (bpp) 24 Function Deserializer Input compatibility V3Link Pixel clock frequency (max) (MHz) 100 Output compatibility MIPI CSI-2 Features Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Port Replication Mode, Ultra-Low Data and Control Path Latency Signal conditioning Adaptive Equalizer, Programmable Equalizer EMI reduction LVDS, SSC Compatible Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
Applications Camera SerDes Color depth (bpp) 24 Function Deserializer Input compatibility V3Link Pixel clock frequency (max) (MHz) 100 Output compatibility MIPI CSI-2 Features Coax or STP, Flexible GPIOs, Internal Programmable Precision Frame Sync Generator, Line Fault Detection, Pattern Generation, Port Replication Mode, Ultra-Low Data and Control Path Latency Signal conditioning Adaptive Equalizer, Programmable Equalizer EMI reduction LVDS, SSC Compatible Diagnostics BIST Rating Catalog Operating temperature range (°C) -20 to 85
VQFNP (RUR) 88 144 mm² 12 x 12
  • Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
    • Supports 8MP+ imagers
    • Single-ended coaxial or shielded twisted-pair (STP) cable
    • Power-over-coax (PoC) support
  • Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
  • CSI v2.1 compliant system interface
  • Supports up to 2 MIPI CSI-2 output ports and 1 replication port
    • CSI Port 0: MIPI CSI-2 output port
    • CSI Port 1: MIPI CSI-2 output port
    • CSI Port 2: replication port (D-PHY only)
    • 16 Virtual channels and VC-ID remapping
    • MIPI D-PHY and C-PHY configurable
  • MIPI D-PHY v2.1 compatible
    • Up to 4 data lanes with 2 clocks per port
    • Up to 2.5 Gbps per lane, 10 Gbps per port
  • MIPI C-PHY v1.1 compatible
    • Up to 4 trios per port
    • Up to 5.7 Gbps per trio, 22.8 Gbps per port
  • Quad CMLOUT output ports for off-board processing
    • 4 x CMLOUT ports replicated from 4 x V 3Link RX ports
    • Capable of driving another deserializer at the same line rate
  • 10 GPIO pins for sensor synchronization and diagnostics
  • Dual I2C ports
  • Frozen frame detection
  • Automatic receiver equalization
  • Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
  • Low power sleep mode with GPIO-state retention
  • Wide temperature range: -20°C to 85°C
  • Quad 7.55 Gbps deserializer hub aggregates data from up to 4 sensors simultaneously
    • Supports 8MP+ imagers
    • Single-ended coaxial or shielded twisted-pair (STP) cable
    • Power-over-coax (PoC) support
  • Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps
  • CSI v2.1 compliant system interface
  • Supports up to 2 MIPI CSI-2 output ports and 1 replication port
    • CSI Port 0: MIPI CSI-2 output port
    • CSI Port 1: MIPI CSI-2 output port
    • CSI Port 2: replication port (D-PHY only)
    • 16 Virtual channels and VC-ID remapping
    • MIPI D-PHY and C-PHY configurable
  • MIPI D-PHY v2.1 compatible
    • Up to 4 data lanes with 2 clocks per port
    • Up to 2.5 Gbps per lane, 10 Gbps per port
  • MIPI C-PHY v1.1 compatible
    • Up to 4 trios per port
    • Up to 5.7 Gbps per trio, 22.8 Gbps per port
  • Quad CMLOUT output ports for off-board processing
    • 4 x CMLOUT ports replicated from 4 x V 3Link RX ports
    • Capable of driving another deserializer at the same line rate
  • 10 GPIO pins for sensor synchronization and diagnostics
  • Dual I2C ports
  • Frozen frame detection
  • Automatic receiver equalization
  • Compatible with TSER9615, TSER953, and with the TSER4905 (when used in Enhanced Vision mode)
  • Low power sleep mode with GPIO-state retention
  • Wide temperature range: -20°C to 85°C

The TDES9640 is a V 3Link Enhanced Vision deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps bidirectional control channel for connecting up to 4 data sensors to the processing unit over a coaxial or STP cable. When paired with the TSER9615 or the TSER4905 serializers, the TDES9640 receives video data from image sensors or video sources supporting ultra-high resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2 D-PHY or C-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication in D-PHY mode only. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.

The TDES9640 supports advanced data protection and diagnostic features, as well as multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt, which helps achieve robust sensor module and link operation in the end application.

The TDES9640 is a V 3Link Enhanced Vision deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps bidirectional control channel for connecting up to 4 data sensors to the processing unit over a coaxial or STP cable. When paired with the TSER9615 or the TSER4905 serializers, the TDES9640 receives video data from image sensors or video sources supporting ultra-high resolutions or multiple sensors in various topologies.

Data is received and aggregated into two MIPI CSI-2 D-PHY or C-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication in D-PHY mode only. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.

The TDES9640 supports advanced data protection and diagnostic features, as well as multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt, which helps achieve robust sensor module and link operation in the end application.
filter Andere V3Link-SerDes suchen
Herunterladen Video mit Transkript ansehen Video
Weitere Informationen anfordern

Das vollständige Datenblatt und weitere Designressourcen sind verfügbar. Jetzt anfordern

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet TDES9640 V3LinkTMDeserializer Hub With CSI-2 Output Ports for 8-MP+ Cameras and Other Sensors datasheet (Rev. A) PDF | HTML 16 Nov 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DS90UB9702-Q1EVM — DS90UB9702-Q1-Evaluierungsmodul

Das Evaluierungsmodul (EVM) DS90UB9702-Q1EVM ist ein funktionsfähiges Platinendesign zur Evaluierung des Deserializer-Hubs DS90UB9702-Q1 FPD-Link IV. Der DS90UB9702-Q1 ist ein vielseitiger Deserializer, der Daten von bis zu vier unabhängigen Videoquellen über FPD-Link III- und FPD-Link (...)
Anfordern
Anwendungssoftware und Frameworks

ALP — Analog LaunchPad Framework Utility

Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

  • Local and remote device access
  • (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Support-Software

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

  • Local and remote device access
  • (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware
Herunterladen
Simulationsmodell

TDES9640 IBIS AMI Models

SNLM271.ZIP (207370 KB) - IBIS-AMI Model
lock = Nur mit Exportgenehmigung (1 Minute)
lock Herunterladen
Simulationsmodell

TDES9640 IBIS Model

SNLM268.ZIP (6040 KB) - IBIS Model
lock = Nur mit Exportgenehmigung (1 Minute)
lock Herunterladen
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese Design- und Simulationssuite mit vollem Funktionsumfang verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFNP (RUR) 88 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos