SPRUJ42 User guide

SPRUJ42E March 2022 – October 2024 AM2631 , AM2631-Q1 , AM2632 , AM2632-Q1 , AM2634 , AM2634-Q1

PRODUCTION DATA

3.2.2.57 ADC_CFG_ADCSOCFLG1 Register

2.2.57.1 ADC_CFG_ADCSOCFLG1 Register (Offset = 18h) [reset = 0h]

ADC SOC Flag 1 Register.

Table 3-117 Instance Table

Instance Name	Physical Address
ADC0_G0_G5	502C 0018h
ADC1_G0_G5	502C 1018h
ADC2_G0_G5	502C 2018h
ADC3_G0_G5	502C 3018h
ADC4_G0_G5	502C 4018h

Figure 3-57 ADC_CFG_ADCSOCFLG1 Name Register

15	14	13	12	11	10	9	8
SOC15	SOC14	SOC13	SOC12	SOC11	SOC10	SOC9	SOC8
R	R	R	R	R	R	R	R
0h	0h	0h	0h	0h	0h	0h	0h
7	6	5	4	3	2	1	0
SOC7	SOC6	SOC5	SOC4	SOC3	SOC2	SOC1	SOC0
R	R	R	R	R	R	R	R
0h	0h	0h	0h	0h	0h	0h	0h

Table 3-118 ADC_CFG_ADCSOCFLG1 Register Field Descriptions

Bit	Field	Type	Reset	Description
15	SOC15	R	0h	SOC15 Start of Conversion Flag. Indicates the state of SOC15 conversions. 0 No sample pending for SOC15. 1 Trigger has been received and sample is pending for SOC15. This bit will be automatically cleared when the SOC15 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
14	SOC14	R	0h	SOC14 Start of Conversion Flag. Indicates the state of SOC14 conversions. 0 No sample pending for SOC14. 1 Trigger has been received and sample is pending for SOC14. This bit will be automatically cleared when the SOC14 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
13	SOC13	R	0h	SOC13 Start of Conversion Flag. Indicates the state of SOC13 conversions. 0 No sample pending for SOC13. 1 Trigger has been received and sample is pending for SOC13. This bit will be automatically cleared when the SOC13 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
12	SOC12	R	0h	SOC12 Start of Conversion Flag. Indicates the state of SOC12 conversions. 0 No sample pending for SOC12. 1 Trigger has been received and sample is pending for SOC12. This bit will be automatically cleared when the SOC12 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
11	SOC11	R	0h	SOC11 Start of Conversion Flag. Indicates the state of SOC11 conversions. 0 No sample pending for SOC11. 1 Trigger has been received and sample is pending for SOC11. This bit will be automatically cleared when the SOC11 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
10	SOC10	R	0h	SOC10 Start of Conversion Flag. Indicates the state of SOC10 conversions. 0 No sample pending for SOC10. 1 Trigger has been received and sample is pending for SOC10. This bit will be automatically cleared when the SOC10 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
9	SOC9	R	0h	SOC9 Start of Conversion Flag. Indicates the state of SOC9 conversions. 0 No sample pending for SOC9. 1 Trigger has been received and sample is pending for SOC9. This bit will be automatically cleared when the SOC9 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
8	SOC8	R	0h	SOC8 Start of Conversion Flag. Indicates the state of SOC8 conversions. 0 No sample pending for SOC8. 1 Trigger has been received and sample is pending for SOC8. This bit will be automatically cleared when the SOC8 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
7	SOC7	R	0h	SOC7 Start of Conversion Flag. Indicates the state of SOC7 conversions. 0 No sample pending for SOC7. 1 Trigger has been received and sample is pending for SOC7. This bit will be automatically cleared when the SOC7 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
6	SOC6	R	0h	SOC6 Start of Conversion Flag. Indicates the state of SOC6 conversions. 0 No sample pending for SOC6. 1 Trigger has been received and sample is pending for SOC6. This bit will be automatically cleared when the SOC6 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
5	SOC5	R	0h	SOC5 Start of Conversion Flag. Indicates the state of SOC5 conversions. 0 No sample pending for SOC5. 1 Trigger has been received and sample is pending for SOC5. This bit will be automatically cleared when the SOC5 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
4	SOC4	R	0h	SOC4 Start of Conversion Flag. Indicates the state of SOC4 conversions. 0 No sample pending for SOC4. 1 Trigger has been received and sample is pending for SOC4. This bit will be automatically cleared when the SOC4 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
3	SOC3	R	0h	SOC3 Start of Conversion Flag. Indicates the state of SOC3 conversions. 0 No sample pending for SOC3. 1 Trigger has been received and sample is pending for SOC3. This bit will be automatically cleared when the SOC3 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
2	SOC2	R	0h	SOC2 Start of Conversion Flag. Indicates the state of SOC2 conversions. 0 No sample pending for SOC2. 1 Trigger has been received and sample is pending for SOC2. This bit will be automatically cleared when the SOC2 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
1	SOC1	R	0h	SOC1 Start of Conversion Flag. Indicates the state of SOC1 conversions. 0 No sample pending for SOC1. 1 Trigger has been received and sample is pending for SOC1. This bit will be automatically cleared when the SOC1 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.
0	SOC0	R	0h	SOC0 Start of Conversion Flag. Indicates the state of SOC0 conversions. 0 No sample pending for SOC0. 1 Trigger has been received and sample is pending for SOC0. This bit will be automatically cleared when the SOC0 conversion is started. If contention exists where this bit receives both a request to set and a request to clear on the same cycle, regardless of the source of either, this bit will be set and the request to clear will be ignored. In this case the overflow bit in the ADCSOCOVF1 register will not be affected regardless of whether this bit was previously set or not.