LMK05028EVM
LMK05028 網路時鐘產生器和同步器評估模組
LMK05028EVM
概覽
LMK05028EVM 是適用於 LMK05028 網路時鐘產生器和同步器的評估模組。EVM 可用於裝置評估、合規測試和系統原型設計。
LMK05028 整合了兩個數位 PLL (DPLL) 與可編程頻寬,可用於輸入漂移和抖動衰減。EVM 包括 SMA 連接器,用於時鐘輸入、振盪器輸入和時鐘輸出,以便與 50-Ω 測試設備介接。板載 XO 和 TCXO 選項可用來對 LMK05028 操作時的自由運轉、鎖定或維持模式進行評估。EVM 可透過板載 USB 微控制器 (MCU) 介面,使用配備 TI TICS Pro 軟體圖形使用者介面 (GUI) 的 PC 進行配置。TiCS Pro 可用於將 LMK05028 暫存器程式化,並將設定儲存在晶片 EEPROM 中,以在開機時啟用自訂時鐘配置。
特點
- 具有可編程頻寬的雙 DPLL,以及適用於頻率轉換的類比 PLL
- 4 個時鐘輸入,支援無衝擊切換及維持
- 8 個差動或 16 個 LVCMOS 輸出時鐘,或兩者的組合
- 用於自訂啟動時鐘的晶片內建 EEPROM
- 彈性振盪器選項:板載 XO、TCXO 或外部 SMA 輸入
- 使用 TiCS Pro GUI 且適用於 I2C/SPI 和 GPIO 針腳控制的 USB MCU 介面
3 英尺迷你 USB 傳輸線 (MPN 3021003-03)
振盪器
開始使用
- 訂購 CDCE6214-Q1EVM
- 下載並安裝 TICSPRO-SW
- 閱讀 CDCE6214-Q1EVM 使用指南
- 在 TICSRPRO-SW 上配置暫存器
訂購並開始開發
開發板
LMK05028EVM — LMK05028 Network Clock Generator and Synchronizer Evaluation Module
LMK05028EVM — LMK05028 Network Clock Generator and Synchronizer Evaluation Module
支援軟體
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
支援產品和硬體
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
文件
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
版本資訊
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
新功能
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | EVM User's guide | LMK05028EVM User's Guide | PDF | HTML | 2018/1/19 | ||
| 資料表 | LMK05028 Low-Jitter Dual-Channel Network Synchronizer Clock With EEPROM datasheet (Rev. B) | PDF | HTML | 2025/2/14 | |||
| 證書 | LMK05028EVM EU Declaration of Conformity (DoC) | 2019/1/2 |