LMX2582EVM
具有整合式 VCO 的 LMX2582EVM 高效能、寬頻頻率 PLLatinum 射頻合成器
LMX2582EVM
概覽
此評估模組適用於 LMX2582,可輸出具備業界領先相位雜訊的極高頻率訊號。整合式 VCO 讓設計只需極少的分立外部元件。PCB 已針對性能最佳化,並專為輕鬆自訂迴路濾波器而設計。LED 設計用於快速目視檢查 PLL 鎖定狀態。透過板載振盪器,設定過程僅需 3.3V 電源供應器及隨附的 USB2ANY 模組。本軟體使用直覺式且使用方便的 GUI,十分簡單。
特點
- 從 20 到 5500MHz 的極低相位雜訊輸出
- 可鎖定 5 到 1400MHz 的輸入訊號
- 單 3.3V 電源供應
- 兩個差動輸出搭配可編程輸出功率
- 此 EVM 具有用於合成器的完整電路,已針對性能進行最佳化與測試,並且包含 USB 編程模組
- LMX2582EVM
- USB2ANY
RF PLL 與合成器
開始使用
- 訂購 LMX2582EVM
- 下載並安裝 TICSPRO-SW 和 PLLATINUMSIM-SW
- 閱讀 LMX2582EVM 使用指南
- 在 TICSPRO-SW 上配置暫存器,在 PLLATINUMSIM-SW 上模擬性能
訂購並開始開發
開發板
LMX2582EVM — 具有整合式 VCO 的 LMX2582EVM 高效能、寬頻頻率 PLLatinum 射頻合成器
LMX2582EVM — 具有整合式 VCO 的 LMX2582EVM 高效能、寬頻頻率 PLLatinum 射頻合成器
支援軟體
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
支援產品和硬體
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.7.6 installer binary for Windows operating system
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
文件
TICS Pro 1.7.7.6 Software Manifest
TICS Pro 1.7.7.6 Release Notes
版本資訊
Added Features
LMK5Bxxyyy, LMK5Cxxyyy
- Warnings and errors improved, particularly corrective suggestions
- REFx_FREQ=0 automatically disables DPLL reference input selection for that input
- Input validation enabled and disabled by start page settings, including 1PPS
- APLL reference selection moved to Step 5, just before clock output definition
- Quick-set multiple outputs to the same settings on frequency planner
- BAW VCO allows some ppm deviation
- Force SYSREF option on OUT0/1
- Expose DPLLx_LCK_TIMER field
- Match LMK05318B EEPROM page design
- .EPR export option
- EEPROM SRAM programming generation support
- For complete changelist, see release notes
LMK3H0102
- Configuration search tool
- Wizard: voltage selection option
Bug Fixes
- LMK04832-SP, LMK04832-SEP, LMK04714-Q1, LMK04368-EP - PD_FIN0 corrected to FIN0_PD
- LMK3H0102 - Several wizard bugfixes
Known Issues
- LMK5C33216 - When cascading from VCO3 to DPLL input, the divide value must manually be entered into DPLLx_REF5_RDIV as ( VCO3 output frequency / DPLLx TDC frequency )
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | EVM User's guide | LMX2582EVM User's Guide | PDF | HTML | 2015/12/18 | ||
| 證書 | LMX2582EVM EU Declaration of Conformity (DoC) | 2019/1/2 | ||||
| 技術文章 | Don’t let bad reference signals destroy the phase noise in your PLL/synthesizer | PDF | HTML | 2017/1/10 |