LMX2594EVM
具有相位同步功能且符合 JESD204B 標準的 LMX2594EVM 15 GHz 寬頻射頻合成器評估模組
LMX2594EVM
概覽
LMX2594EVM 評估模組 (EVM) 是用於開發 LMX2594 的平台。LMX2594 是業界首款內建電壓控制振盪器 (VCO) 的 PLL,其基頻 VCO 輸出可達 15GHz。領先業界的 PLL 品質因數 (FOM) 為 –236dBc/Hz 和 1/f 的 –129dBc/Hz。此裝置支援 JESD204B 標準(可產生或重複 SYSREF 訊號),因此最適合時鐘高速資料轉換器。EVM 測量的整合式抖動在 9-GHz 載波頻率下低於 50 fs。透過提供 SYNC 訊號,使用者可在多個 LMX2594 裝置中同步輸出相位。LMX2594 裝置也可產生頻率斜率,可在此評估模組中示範。有了板載振盪器,設定程序僅需使用 3.3V 電源供應器和隨附的參考專業模組(適用於 SPI 編程介面)。本軟體使用直覺式且使用方便的 GUI,十分簡單。
特點
- 10-MHz 至 15-GHz 輸出頻率
- 在 15-GHz 載波的 100-kHz 偏移時為 –110dBc/Hz 相位雜訊
- 在 7.5GHz(100Hz 至 100MHz)時為 45-fs rms 抖動
- 兩個差動輸出具可編程輸出功率,在 15GHz 時最高可達 7dBm
- 合成器的完整電路,通過性能最佳化和測試,包括 USB 編程模組
- 參考專業
- LMX2594EVM
AC/DC 和 DC/DC 轉換器 (整合式 FET)
開始使用
- 訂購 LMX2594EVM
- 下載並安裝 TICSPRO-SW 和 PLLATINUMSIM-SW
- 閱讀 LMX2594EVM 使用指南
- 在 TICSPRO-SW 上配置暫存器,在 PLLATINUMSIM-SW 上模擬性能
訂購並開始開發
開發板
LMX2594EVM — LMX2594 evaluation module for 15-GHz wideband RF synthesizer with phase synchronization and JESD204B
LMX2594EVM — LMX2594 evaluation module for 15-GHz wideband RF synthesizer with phase synchronization and JESD204B
支援軟體
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
支援產品和硬體
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
文件
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
版本資訊
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
新功能
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
設計檔案
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | EVM User's guide | LMX2594EVM User's Guide (Rev. B) | PDF | HTML | 2021/8/27 | ||
| 資料表 | LMX2594 15-GHz Wideband PLLATINUM™ RF Synthesizer With Phase Synchronization and JESD204B Support datasheet (Rev. C) | PDF | HTML | 2019/4/17 | |||
| 證書 | LMX2594EVM EU Declaration of Conformity (DoC) (Rev. A) | 2019/1/2 |