LMX2595EVM
具有相位同步功能且符合 JESD204B 標準的 20 GHz 寬頻射頻合成器評估模組
LMX2595EVM
概覽
此評估模組適用於 LMX2595,此模組是業界首款採用整合 VCO 的 PLL,可獲得高達 15GHz 的基本 VCO 輸出,使用倍頻器後可高達 20GHz。領先業界的 PLL FOM 為 -236dBc/Hz 和 1/f 的 -129dBc/Hz。此裝置支援 JESD204B 標準(可產生或重複 SYSREF 訊號),因此最適合時鐘高速資料轉換器。EVM 測量的整合式抖動在 9GHz 載波頻率下低於 50fs。透過提供 SYNC 訊號,使用者可在多個 LMX2595 裝置中同步輸出相位。LMX2595 可產生頻率斜坡,可在此評估模組中示範。有了板載振盪器,設定程序僅需使用 3.3V 電源供應器和隨附的 Refernce Pro 模組(適用於 SPI 編程介面)。本軟體使用直覺式且使用方便的 GUI,十分簡單。
特點
- 10-MHz 至 20-GHz 輸出頻率
- 在 15-GHz 載波的 100-kHz 偏移時為 –110dBc/Hz 相位雜訊
- 在 7.5GHz(100Hz 至 100MHz)時為 45-fs rms 抖動
- 兩個差動輸出具可編程輸出功率,在 15GHz 時最高可達 7dBm
- 此 EVM 具有用於合成器的完整電路,已針對性能進行最佳化與測試,並且包含 USB 編程模組
- 參考專業
- USB2ANY
RF PLL 與合成器
開始使用
- 訂購 LMX2595EVM
- 下載並安裝 TICSPRO-SW 和 PLLATINUMSIM-SW
- 閱讀 LMX2595EVM 使用指南
- 在 TICSPRO-SW 上配置暫存器,在 PLLATINUMSIM-SW 上模擬性能
訂購並開始開發
開發板
LMX2595EVM — 具有相位同步功能且符合 JESD204B 標準的 20 GHz 寬頻射頻合成器評估模組
LMX2595EVM — 具有相位同步功能且符合 JESD204B 標準的 20 GHz 寬頻射頻合成器評估模組
支援軟體
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
支援產品和硬體
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
產品
RF PLL 與合成器
振盪器
時脈網路同步器
時鐘抖動清除器
時鐘產生器
時鐘緩衝器
硬體開發
開發板
文件
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
版本資訊
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
新功能
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
技術文件
=
TI 所選的重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | EVM User's guide | LMX2595 EVM Instructions – 20-GHz Wideband Low Noise PLL With Integrated VCO (Rev. B) | 2020/3/26 | |||
| 證書 | LMX2595EVM EU Declaration of Conformity (DoC) | 2019/1/2 |