首頁 射頻 (RF) 與微波 RF PLL 與合成器
首頁
射頻 (RF) 與微波
RF PLL 與合成器
最新

LMX1404-EP

現行

具有 SYSREF (支援 JESD204B/C) 和 FPGA 時脈的 15GHz 緩衝器/倍頻器/分頻器。

立即訂購
產品規格表

LMX1404-EP

現行
產品規格表 立即訂購

產品詳細資料

Frequency (max) (MHz) 12800 Frequency (min) (MHz) 300 Features Enhanced Product, Integrated multiplier and divider modes, JESD204B/C SYSREF support, Phase synchronization, RF clock distribution, Ultra-low additive jitter Current consumption (mA) 405 Integrated VCO No Operating temperature range (°C) -55 to 125 Rating HiRel Enhanced Product Lock time (µs) (typ) (s) Loop BW dependent
Frequency (max) (MHz) 12800 Frequency (min) (MHz) 300 Features Enhanced Product, Integrated multiplier and divider modes, JESD204B/C SYSREF support, Phase synchronization, RF clock distribution, Ultra-low additive jitter Current consumption (mA) 405 Integrated VCO No Operating temperature range (°C) -55 to 125 Rating HiRel Enhanced Product Lock time (µs) (typ) (s) Loop BW dependent
HTQFP (PAP) 64 144 mm² 12 x 12
  • VID #V62/24627
  • Clock buffer for 300MHz to 15GHz frequency
  • Ultra-Low Noise
    • Noise floor of –159dBc/Hz at 6GHz output
    • 36-fs additive jitter (100Hz to fCLK) at 6GHz output
    • 5fs additive jitter (100Hz - 100MHz)
  • 4 high-frequency clocks with corresponding SYSREF outputs
    • Shared divide by 1 (Buffer), 2, 3, 4, 5, 6, 7, and 8
    • Shared programmable multiplier x2, x3, and x4
  • Support pin mode options to configure the device without SPI
  • LOGICLK output with corresponding SYSREF output
    • On separate divide bank
    • 1, 2, 4 pre-divider
    • 1 (bypass), 2, …, 1023 post divider
  • 8 programmable output power levels
  • Synchronized SYSREF clock outputs
    • 508 delay step adjustments of less than 2.5ps each at 12.8GHz
    • Generator and repeater modes
    • Windowing feature for SYSREFREQ pins to optimize timing
  • SYNC feature to all divides and multiple devices
  • 2.5V operating voltage
  • –55ºC to 125ºC operating temperature
  • High Reliability
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Extended Product Life Cycle
    • Product Traceability
  • VID #V62/24627
  • Clock buffer for 300MHz to 15GHz frequency
  • Ultra-Low Noise
    • Noise floor of –159dBc/Hz at 6GHz output
    • 36-fs additive jitter (100Hz to fCLK) at 6GHz output
    • 5fs additive jitter (100Hz - 100MHz)
  • 4 high-frequency clocks with corresponding SYSREF outputs
    • Shared divide by 1 (Buffer), 2, 3, 4, 5, 6, 7, and 8
    • Shared programmable multiplier x2, x3, and x4
  • Support pin mode options to configure the device without SPI
  • LOGICLK output with corresponding SYSREF output
    • On separate divide bank
    • 1, 2, 4 pre-divider
    • 1 (bypass), 2, …, 1023 post divider
  • 8 programmable output power levels
  • Synchronized SYSREF clock outputs
    • 508 delay step adjustments of less than 2.5ps each at 12.8GHz
    • Generator and repeater modes
    • Windowing feature for SYSREFREQ pins to optimize timing
  • SYNC feature to all divides and multiple devices
  • 2.5V operating voltage
  • –55ºC to 125ºC operating temperature
  • High Reliability
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Extended Product Life Cycle
    • Product Traceability

The LMX1404-EP is an buffer, divider and multiplier that features high frequency, ultra-low jitter, and SYSREF outputs. This device combined with an ultra-low noise reference clock source is an exemplary design for clocking data converters, especially when sampling above 3GHz. Each of the 4 high frequency clock outputs and additional LOGICLK output is paired with a SYSREF output clock signal. The SYSREF signal for JESD interfaces can either be internally generated or passed in as an input and re-clocked to the device clocks. This device can distribute the multichannel, low skew, ultra-low noise local oscillator signals to multiple mixers by disabling the SYSREF outputs.

The LMX1404-EP is an buffer, divider and multiplier that features high frequency, ultra-low jitter, and SYSREF outputs. This device combined with an ultra-low noise reference clock source is an exemplary design for clocking data converters, especially when sampling above 3GHz. Each of the 4 high frequency clock outputs and additional LOGICLK output is paired with a SYSREF output clock signal. The SYSREF signal for JESD interfaces can either be internally generated or passed in as an input and re-clocked to the device clocks. This device can distribute the multichannel, low skew, ultra-low noise local oscillator signals to multiple mixers by disabling the SYSREF outputs.
filter 尋找其它 RF PLL 與合成器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
LMK04368-EP 現行 增強型產品超低雜訊 3.2-GHz JESD204C 抖動清除器 With JESD204 plus additional jitter cleaner and lower frequency
LMX1204 現行 具 JESD204B/C SYSREF 支援和相位同步的 12.8 GHz RF 緩衝器、倍頻器和分頻器 Lower temperature range and smaller package
LMX2694-EP 現行 具有相位同步功能的強化型產品 15 GHz 射頻合成器 Up to 15GHz synthesizer and JESD support

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet LMX1404-EP Low-Noise, High-Frequency JESD204B/C Buffer, Multiplier and Divider datasheet (Rev. A) PDF | HTML 2025年 6月 2日
Application note Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) PDF | HTML 2025年 4月 11日
Certificate LMX1404EPEVM EU Declaration of Conformity (DoC) 2024年 3月 4日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMX1404EPEVM — LMX1404-EP 評估模組

LMX1404-EP 評估模組 (EVM) 設計旨在評估 LMX1404-EP 的性能，其為四路輸出、超低附加抖動無線電頻率 (RF) 緩衝器、分頻器和倍頻器。此 EVM 可緩衝最多 15GHz 的射頻時鐘輸入，在 3.2GHz 至 6.4GHz 的輸出範圍內乘以 x2、x3 或 x4，並將輸入除最多八。

可程式設計邏輯閘陣列 (FPGA) 和邏輯時鐘中隨附獨立的輔助時鐘分頻器，而每個輸出均包含具皮秒精度及延遲微調功能的系統參考 (SYSREF) 補數。多個裝置可針對廣泛的時鐘分配樹狀結構進行同步化。

使用指南: PDF | HTML
要求
支援軟體

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

支援產品和硬體

支援產品和硬體
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PAP) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片