Inicio Gestión de la energía Referencias de tensión Referencias de tensión en serie
Inicio
Gestión de la energía
Referencias de tensión
Referencias de tensión en serie

REF3425

ACTIVO

Referencia de tensión de serie de 2.5 V de baja deriva, baja potencia y huella pequeña

Haga su pedido ahora
Hoja de datos

REF3425

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

VO (V) 2.5 Initial accuracy (max) (%) 0.05 Temp coeff (max) (ppm/°C) 6 Vin (min) (V) 2.55 Vin (max) (V) 12 Iq (typ) (mA) 0.072 Rating Catalog Features 4-wire output, Enable pin LFN 0.1 to 10 Hz (typ) (µVPP) 12.5 Iout/Iz (max) (mA) 10 Operating temperature range (°C) -40 to 125 Shutdown current (ISD) (typ) (µA) 2.5
VO (V) 2.5 Initial accuracy (max) (%) 0.05 Temp coeff (max) (ppm/°C) 6 Vin (min) (V) 2.55 Vin (max) (V) 12 Iq (typ) (mA) 0.072 Rating Catalog Features 4-wire output, Enable pin LFN 0.1 to 10 Hz (typ) (µVPP) 12.5 Iout/Iz (max) (mA) 10 Operating temperature range (°C) -40 to 125 Shutdown current (ISD) (typ) (µA) 2.5
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • Initial accuracy: ±0.05% (maximum)
  • Temperature coefficient : 6 ppm/°C (maximum)
  • Operating temperature range: −40°C to +125°C
  • Output current: ±10 mA
  • Low quiescent current: 95 µA (maximum)
  • Ultra-low zero load dropout voltage: 100 mV (maximum)
  • Wide input voltage: 12 V
  • Output 1/f noise (0.1 Hz to 10 Hz): 3.8 µVp-p/V
  • Excellent long-term stability 25 ppm/1000 hrs
  • Multiple small footprint 6 pin SOT-23 package pinouts: REF34xx and REF34xxT
  • Initial accuracy: ±0.05% (maximum)
  • Temperature coefficient : 6 ppm/°C (maximum)
  • Operating temperature range: −40°C to +125°C
  • Output current: ±10 mA
  • Low quiescent current: 95 µA (maximum)
  • Ultra-low zero load dropout voltage: 100 mV (maximum)
  • Wide input voltage: 12 V
  • Output 1/f noise (0.1 Hz to 10 Hz): 3.8 µVp-p/V
  • Excellent long-term stability 25 ppm/1000 hrs
  • Multiple small footprint 6 pin SOT-23 package pinouts: REF34xx and REF34xxT

The REF34xx device is a low temperature drift (6 ppm/°C), low-power, high-precision CMOS voltage reference, featuring ±0.05% initial accuracy, low operating current with power consumption less than 95 µA. This device also offers very low output noise of 3.8 µVp-p /V, which enables its ability to maintain high signal integrity with high-resolution data converters in noise critical systems. With a small SOT-23 package, REF34xx offers enhanced specifications and pin-to-pin replacement for MAX607x, ADR34xx and LT1790 (REF34xxT, no EN pin). The REF34xx family is compatible to most of the ADC and DAC such as ADS1287, DAC8802 and ADS1112.

Stability and system reliability are further improved by the low output-voltage hysteresis of the device and low long-term output voltage drift. Furthermore, the small size and low operating current of the devices (95 µA) benefit portable and battery-powered applications.

REF34xx is specified for the wide temperature range of −40°C to +125°C.

The REF34xx device is a low temperature drift (6 ppm/°C), low-power, high-precision CMOS voltage reference, featuring ±0.05% initial accuracy, low operating current with power consumption less than 95 µA. This device also offers very low output noise of 3.8 µVp-p /V, which enables its ability to maintain high signal integrity with high-resolution data converters in noise critical systems. With a small SOT-23 package, REF34xx offers enhanced specifications and pin-to-pin replacement for MAX607x, ADR34xx and LT1790 (REF34xxT, no EN pin). The REF34xx family is compatible to most of the ADC and DAC such as ADS1287, DAC8802 and ADS1112.

Stability and system reliability are further improved by the low output-voltage hysteresis of the device and low long-term output voltage drift. Furthermore, the small size and low operating current of the devices (95 µA) benefit portable and battery-powered applications.

REF34xx is specified for the wide temperature range of −40°C to +125°C.

open-in-new Buscar otro/a Referencias de tensión en serie
Descargar Ver vídeo con transcripción Video
Information

Consulte el inventario de TI.com para ver productos similares

Productos con especificaciones similares, ordenados por inventario disponible en TI.com.

Ver ahora

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
REF34-Q1 ACTIVO Referencia de tensión de serie de baja deriva, baja potencia y huella pequeña para automoción AEC-Q100 qualified version of this device

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 15
Tipo Título Fecha
* Data sheet REF34xx Low-Drift, Low-Power, Small-Footprint Series Voltage Reference datasheet (Rev. F) PDF | HTML 10 may 2021
Application note Voltage Reference Selection and Design Tips For Data Converters (Rev. B) PDF | HTML 09 ene 2024
E-book Tips and tricks for designing with voltage references (Rev. A) 07 may 2021
Application note Long-Term Drift in Voltage References PDF | HTML 25 mar 2021
White paper Simplifying Signal Chain Design for High Performance in Small Systems 22 oct 2020
Application note Precision Current Sources and Sinks Using Voltage References 30 jun 2020
Application note Low-Noise Negative Reference Design with REF5025 01 dic 2019
Application brief Voltage Reference Solutions in Motor Control Drives 29 jul 2019
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 28 jun 2019
White paper Voltage reference selection basics white paper (Rev. A) 23 oct 2018
Application brief Choosing the Right Voltage Reference for Your Automotive Application 17 jul 2018
Application brief Level Shifting Signals With Differential Amplifiers (Rev. A) 02 abr 2018
Technical article Accurately measure vital signs with low Iq and a small form factor (Rev. B) PDF | HTML 28 mar 2018
Technical article How to ensure precision in automated processes PDF | HTML 07 nov 2017
Analog Design Journal Getting the most out of your instrumentation amplifier design 10 oct 2005

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DIP-ADAPTER-EVM — Módulo de evaluación de adaptador DIP

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

PSEMTHR24EVM-081 — Placa base para sistema PSE de 24 puertos compatible con IEEE 802.3bt

PSEMTHR24EVM-081 is the base board for the TPS23881 and TPS23882 PSE controllers. This board contains 24 2-Pair / 4-Pair ports that can that can be used to send up to 30W/port for IEEE 802.3at applications and up to 90W/port for IEEE 802.3bt applications.

Ver opciones
Modelo de simulación

REF3425 TINA-TI Reference Design

SBAM336.TSC (80 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

REF3425 TINA-TI Spice Model

SBAM421.ZIP (21 KB) - TINA-TI Spice Model
Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Diseños de referencia

TIDA-00300 — Diseño de referencia de arquitectura de potencia aislada para módulos de comunicación y entrada/sali

This reference design provides a means to isolate I2C or SPI communication lines. This is often required in grid infrastructure applications such as protection relays and circuit breakers where high voltages are involved. This reference design provides both power isolation and signal isolation.
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00420 — Diseño de referencia de entrada binaria de CA/CC de 16 canales, entrada amplia, aislado digitalmente

This reference design showcases a cost-optimized and scalable ADC-based AC/DC binary input module (BIM) architecture with reinforced isolation. The 16 channels of a 10- or 12-bit SAR ADC are used for sensing multiple binary inputs. The op amps, in addition to keeping the cost per-channel low, (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010065 — Diseño de referencia de módulo de entrada analógica basado en convertidor de CC/CC aislado de alta e

This reference design is a simplified architecture for generating an isolated power supply for isolated amplifiers for measuring isolated voltages and currents. A fully integrated DC/DC converter with reinforced isolation operating from a 5-V input with configurable 5-V or 5.4-V output (headroom (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00834 — Diseño de referencia del extremo frontal analógico de alta precisión con ADC SAR de 16 bits de rango

The TIDA-00834 reference design accurately measures voltage and current inputs using simultaneously sampled, 16-bit, ±10 V, bipolar input SAR ADC critical to identify power systems malfunction and power quality related failures accurately and quickly. This results in reduced power systems (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00835 — Diseño de referencia de medición de tensión aislada y corriente de ±0.5 % de alta precisión con ADC

The TIDA-00835 reference design allows for accurate voltage and current measurement using a bipolar input configuration by incorporating a four- channel, 24-bit simultaneously-sampling differential input Delta-Sigma ADC over wide dynamic range. The ADC is configured to measure ±2.5 V bipolar (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-050026-23881 — Diseño de referencia de equipos de fuente de alimentación de 24 puertos (PoE 2, 4 pares) para aplica

This reference design showcases a Type-4 (PoE 2, 4-Pair) 24-port Ethernet switch for Power over Ethernet (PoE) applications which can send up to 90W per port for for IEEE 802.3bt (PoE 2) applications and up to 120W per port for non-standard applications. Based on the MSP430F523x family, our (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-050026-23882 — Diseño de referencia de equipos de fuente de alimentación de 24 puertos (PoE 2, 2 pares) para aplica

This reference design showcases a Type-3, 30W, 2-Pair 24-port Ethernet switch for Power over Ethernet (PoE) applications which can send up to 30W per port for IEEE 802.3bt Type 3 applications and up to 60W per port for non-standard applications. Based on the MSP430F523x family, TI's TPS2388x (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010055 — Diseño de referencia de arquitectura de alimentación no aislada con diagnóstico para módulos de relé

This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-060020 — Diseño de referencia de módulo de entrada analógica de PLC compatible con HART

This reference design is a single-channel, 4-mA to 20-mA analog input module that supports the highway addressable remote transducer (HART) communication protocol, enabling bidirectional digital communication between field transmitters and programmable logic controllers (PLCs). The loop current, (...)
Design guide: PDF
Esquema: PDF
Paquete Pasadores Descargar
SOT-23 (DBV) 6 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos