ADS1284

ACTIVO

ADC de ultra alta resolución, 4 kSPS y 2 canales con PGA y modo de baja potencia para exploración sí

Detalles del producto

Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 12 Analog supply voltage (min) (V) 0, 2.5 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 127 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 31 Sample rate (max) (ksps) 4 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 1.15, 3.75 Input voltage range (min) (V) -1.9, 0.7 Features PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 12 Analog supply voltage (min) (V) 0, 2.5 Analog supply voltage (max) (V) 2.5, 5 SNR (dB) 127 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
VQFN (RHF) 24 20 mm² (5 mm × 4 mm)
  • Selectable Operating Modes
  • Low-Power Mode:
    • 12 mW (PGA = 1, 2, 4 and 8)
    • 127 dB SNR (250 SPS, PGA = 1)
  • High-Resolution Mode:
    • 18 mW (PGA = 1, 2, 4 and 8)
    • 130 dB SNR (250 SPS, PGA = 1)
  • THD: –122 dB
  • CMRR: 110 dB
  • Two-Channel Multiplexer
  • Inherently-Stable Modulator
  • Fast Responding Overrange Detector
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Option
    • Programmable High-Pass Filter
  • Offset and Gain Calibration
  • SYNC Input
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 1.8 V to 3.3 V
  • Selectable Operating Modes
  • Low-Power Mode:
    • 12 mW (PGA = 1, 2, 4 and 8)
    • 127 dB SNR (250 SPS, PGA = 1)
  • High-Resolution Mode:
    • 18 mW (PGA = 1, 2, 4 and 8)
    • 130 dB SNR (250 SPS, PGA = 1)
  • THD: –122 dB
  • CMRR: 110 dB
  • Two-Channel Multiplexer
  • Inherently-Stable Modulator
  • Fast Responding Overrange Detector
  • Flexible Digital Filter:
    • Sinc + FIR + IIR (Selectable)
    • Linear or Minimum Phase Option
    • Programmable High-Pass Filter
  • Offset and Gain Calibration
  • SYNC Input
  • Analog Supply: 5 V or ±2.5 V
  • Digital Supply: 1.8 V to 3.3 V

The ADS1284 is a high-performance, single-chip, analog-to-digital converter (ADC). This device includes a low-noise programmable gain amplifier (PGA), delta-sigma (ΔΣ) modulator, and digital filter. The ADC supports two modes of operation with trade-offs between power and resolution.

The two-channel multiplexer has the inputs for signal measurement and an ADC signal test. A mode is available to short circuit the inputs and test for internal noise. The PGA has the high input impedance and low noise, which provides for the direct connection of geophone and hydrophone sensors.

The fourth-order, inherently stable modulator provides outstanding noise and linearity performance. The modulator output is filtered and decimated by the on-chip digital filter to yield the ADC conversion result.

The digital filter provides data rates from 250 to 4000 SPS. The high-pass filter (HPF) has a programmable corner frequency. On-chip gain and offset scale registers support system calibration.

The synchronization input controls the timing of the ADC conversion. The power-down input puts the ADC into power-down mode.

The ADS1284 is available in a compact 24-lead, 5-mm × 4-mm VQFN package, and is fully specified from –40°C to +85°C, with a maximum operating temperature range of –50°C to +125°C.

The ADS1284 is a high-performance, single-chip, analog-to-digital converter (ADC). This device includes a low-noise programmable gain amplifier (PGA), delta-sigma (ΔΣ) modulator, and digital filter. The ADC supports two modes of operation with trade-offs between power and resolution.

The two-channel multiplexer has the inputs for signal measurement and an ADC signal test. A mode is available to short circuit the inputs and test for internal noise. The PGA has the high input impedance and low noise, which provides for the direct connection of geophone and hydrophone sensors.

The fourth-order, inherently stable modulator provides outstanding noise and linearity performance. The modulator output is filtered and decimated by the on-chip digital filter to yield the ADC conversion result.

The digital filter provides data rates from 250 to 4000 SPS. The high-pass filter (HPF) has a programmable corner frequency. On-chip gain and offset scale registers support system calibration.

The synchronization input controls the timing of the ADC conversion. The power-down input puts the ADC into power-down mode.

The ADS1284 is available in a compact 24-lead, 5-mm × 4-mm VQFN package, and is fully specified from –40°C to +85°C, with a maximum operating temperature range of –50°C to +125°C.

Descargar Ver vídeo con transcripción Video
Solicitar más información

Los recursos de diseño adicionales están disponibles. Solicitar ahora

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
ADS1285 ACTIVO ADC sigma-delta de 32 bits y 2 canales de alta resolución para exploración sísmica y geoespacial< Higher dynamic range, lower power

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos ADS1284 High-Resolution, Analog-to-Digital Converter datasheet (Rev. A) PDF | HTML 27/08/2019
Nota sobre la aplicación Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) PDF | HTML 18/03/2024
Nota sobre la aplicación Digital Filter Types in Delta-Sigma ADCs (Rev. A) PDF | HTML 29/03/2023
Libro electrónico Fundamentals of Precision ADC Noise Analysis (Rev. A) 19/06/2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

Productos y hardware compatibles
Herramienta de diseño

ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.

The ADC-TO-VREF-SELECT tool enables the pairing of TI analog-to-digital converters (ADCs) and series voltage references. Users can select an ADC device and the desired reference voltage, and the tool will list up to two voltage reference recommendations.
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RHF) 24 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos