SWCU195A December   2024  – May 2025 CC2744R7-Q1 , CC2745P10-Q1 , CC2745R10-Q1 , CC2745R7-Q1 , CC2755R10

 

  1.   1
  2.   Read This First
    1.     About This Manual
    2.     Devices
    3.     Register, Field, and Bit Calls
    4.     Related Documentation
    5.     Trademarks
  3. 1 Architectural Overview
    1. 1.1  Target Applications
    2. 1.2  Introduction
    3. 1.3  Arm Cortex M33
      1. 1.3.1 Processor Core
      2. 1.3.2 SysTick Timer
      3. 1.3.3 Nested Vectored Interrupt Controller
      4. 1.3.4 System Control Block (SCB)
      5. 1.3.5 TI Machine Learning Instruction Extensions
    4. 1.4  On-Chip Memory
      1. 1.4.1 SRAM
      2. 1.4.2 FLASH
      3. 1.4.3 ROM
    5. 1.5  Power Supply System
      1. 1.5.1 VDDS
      2. 1.5.2 VDDIO
      3. 1.5.3 VDDR
      4. 1.5.4 VDDD Digital Core Supply
      5. 1.5.5 DC/DC Converter
    6. 1.6  Radio
    7. 1.7  Hardware Security Module
    8. 1.8  AES 128-Bit Cryptographic Accelerator
    9. 1.9  System Timer (SYSTIM)
    10. 1.10 General Purpose Timers (LGPT)
    11. 1.11 Always-ON (AON) or Ultra-Low Leakage (ULL) Domain
      1. 1.11.1 Watchdog Timer
      2. 1.11.2 Battery and Temperature Monitor
      3. 1.11.3 Voltage Glitch Monitor (VGM)
      4. 1.11.4 Real-Time Clock (RTC)
      5. 1.11.5 Low Power Comparator
    12. 1.12 Direct Memory Access
    13. 1.13 System Control and Clock
    14. 1.14 Communication Peripherals
      1. 1.14.1 UART
      2. 1.14.2 I2C
      3. 1.14.3 SPI
      4. 1.14.4 CAN-FD
      5. 1.14.5 I2S
    15. 1.15 Programmable I/Os
    16. 1.16 Algorithm Processing Unit (APU)
    17. 1.17 Serial Wire Debug (SWD)
  4. 2 Arm® Cortex®-M33 Processor
    1. 2.1 Arm® Cortex®-M33 Processor Introduction
    2. 2.2 M33 Instantiation Parameters
    3. 2.3 Arm® Cortex®-M33 System Peripheral Details
      1. 2.3.1 Floating Point Unit (FPU)
      2. 2.3.2 Memory Protection Unit (MPU)
      3. 2.3.3 Digital Signal Processing (DSP)
      4. 2.3.4 Security Attribution Unit (SAU)
      5. 2.3.5 System Timer (SysTick)
      6. 2.3.6 Nested Vectored Interrupt Controller (NVIC)
      7. 2.3.7 System Control Block (SCB)
      8. 2.3.8 System Control Space (SCS)
    4. 2.4 CPU Sub-System Peripheral Details
      1. 2.4.1 Trace Port Interface Unit (TPIU)
      2. 2.4.2 DAP Bridge and Debug Authentication
      3. 2.4.3 Implementation Defined Attribution Unit (IDAU)
      4. 2.4.4 Custom Datapath Extension (CDE)
    5. 2.5 Programming Model
      1. 2.5.1 Modes of Operation and Execution
        1. 2.5.1.1 Security States
        2. 2.5.1.2 Operating Modes
        3. 2.5.1.3 Operating States
        4. 2.5.1.4 Privileged Access and Unprivileged User Access
      2. 2.5.2 Instruction Set Summary
      3. 2.5.3 Memory Model
        1. 2.5.3.1 Private Peripheral Bus
        2. 2.5.3.2 Unaligned Accesses
      4. 2.5.4 Processor Core Registers Summary
      5. 2.5.5 Exceptions
        1. 2.5.5.1 Exception Handling and Prioritization
    6. 2.6 TrustZone-M
      1. 2.6.1 Overview
      2. 2.6.2 M33 Configuration
      3. 2.6.3 Description of Elements
        1. 2.6.3.1 IDAU (Implementation Defined Attribution Unit)
          1. 2.6.3.1.1 Expected Use
        2. 2.6.3.2 Gaskets
          1. 2.6.3.2.1 Periphery Gasket
          2. 2.6.3.2.2 Controller Gasket
        3. 2.6.3.3 Memories
        4. 2.6.3.4 TCM
      4. 2.6.4 TCM Registers
    7. 2.7 Arm® Cortex®-M33 Registers
      1. 2.7.1  CPU_ROM_TABLE Registers
      2. 2.7.2  TPIU Registers
      3. 2.7.3  DCB Registers
      4. 2.7.4  DIB Registers
      5. 2.7.5  DWT Registers
      6. 2.7.6  FPB Registers
      7. 2.7.7  FPE Registers
      8. 2.7.8  ICB Registers
      9. 2.7.9  ITM Registers
      10. 2.7.10 MPU Registers
      11. 2.7.11 NVIC Registers
      12. 2.7.12 SAU Registers
      13. 2.7.13 SCB Registers
      14. 2.7.14 SYSTIMER Registers
      15. 2.7.15 SYSTICK Registers
      16. 2.7.16 Clock Control
      17. 2.7.17 Protocol Descriptions
      18. 2.7.18 Reset Considerations
        1. 2.7.18.1 Hardware Reset Considerations
      19. 2.7.19 Initialization
      20. 2.7.20 Interrupt and Event Support
        1. 2.7.20.1 Connection to Event Fabric
      21. 2.7.21 Power Management
  5. 3 Memory Map
    1. 3.1 Memory Map
  6. 4 Interrupts and Events
    1. 4.1 Exception Model
      1. 4.1.1 Exception States
      2. 4.1.2 Exception Types
      3. 4.1.3 Exception Handlers
      4. 4.1.4 Vector Table
      5. 4.1.5 Exception Priorities
      6. 4.1.6 Interrupt Priority Grouping
      7. 4.1.7 Exception Entry and Return
        1. 4.1.7.1 Exception Entry
        2. 4.1.7.2 Exception Return
    2. 4.2 Fault Handling
      1. 4.2.1 Fault Types
      2. 4.2.2 Fault Escalation to HardFault
      3. 4.2.3 Fault Status Registers and Fault Address Registers
      4. 4.2.4 Lockup
    3. 4.3 Security State Switches
    4. 4.4 Event Fabric
      1. 4.4.1 Introduction
      2. 4.4.2 Overview
      3. 4.4.3 Registers
      4. 4.4.4 AON Event Fabric
        1. 4.4.4.1 AON Common Input Events List
        2. 4.4.4.2 AON Event Subscribers
        3. 4.4.4.3 Power Management Controller (PMCTL)
        4. 4.4.4.4 Real Time Clock (RTC)
        5. 4.4.4.5 AON to MCU Event Fabric
      5. 4.4.5 MCU Event Fabric
        1. 4.4.5.1 Common Input Event List
        2. 4.4.5.2 MCU Event Subscribers
          1. 4.4.5.2.1 System CPU
          2. 4.4.5.2.2 Non-Maskable Interrupt (NMI)
    5. 4.5 Digital Test Bus (DTB)
    6. 4.6 EVTSVT Registers
    7. 4.7 EVTULL Registers
  7. 5 Debug Subsystem
    1. 5.1  Introduction
    2. 5.2  Block Diagram
    3. 5.3  Overview
      1. 5.3.1 Physical Interface
      2. 5.3.2 Debug Access Ports
    4. 5.4  Debug Features
      1. 5.4.1 Processor Debug
      2. 5.4.2 Breakpoint Unit (BPU)
      3. 5.4.3 Peripheral Debug
    5. 5.5  Behavior in Low Power Modes
    6. 5.6  Restricting Debug Access
    7. 5.7  Mailbox (DSSM)
    8. 5.8  Mailbox Events
      1. 5.8.1 CPU Interrupt Event (AON_DBG_COMB)
    9. 5.9  Software Considerations
    10. 5.10 DBGSS Registers
  8. 6 Power, Reset, and Clocking
    1. 6.1 Introduction
    2. 6.2 System CPU Modes
    3. 6.3 Supply System
      1. 6.3.1 Internal DC/DC Converter and Global LDO
    4. 6.4 Power States
      1. 6.4.1 RESET
      2. 6.4.2 SHUTDOWN
      3. 6.4.3 ACTIVE
      4. 6.4.4 IDLE
      5. 6.4.5 STANDBY
      6. 6.4.6 PMCTL Registers
    5. 6.5 Digital Power Partitioning
    6. 6.6 Clocks
      1. 6.6.1 Block Diagram
      2. 6.6.2 LF clock
        1. 6.6.2.1 LFINC Measurement Mechanism
        2. 6.6.2.2 LFINC Filtering
      3. 6.6.3 HFOSC
        1. 6.6.3.1 HFOSC Control and Qualification
        2. 6.6.3.2 HFOSC Tracking Loop
      4. 6.6.4 AFOSC
        1. 6.6.4.1 AFOSC Control and Qualification
        2. 6.6.4.2 AFOSC Tracking Loop
        3. 6.6.4.3 AFOSC Ratio
      5. 6.6.5 CLKSVT
      6. 6.6.6 CLKULL
      7. 6.6.7 CKM Registers
      8. 6.6.8 CKMD Registers
      9. 6.6.9 CLKCTL Registers
    7. 6.7 Resets
      1. 6.7.1 Watchdog Timer (WDT)
      2. 6.7.2 RTC Reset
      3. 6.7.3 LF Loss Detection
    8. 6.8 AON (REG3V3) Register Bank
  9. 7 Internal Memory
    1. 7.1 SRAM
      1. 7.1.1 Overview
        1. 7.1.1.1 Purpose of the Peripheral
        2. 7.1.1.2 Features
        3. 7.1.1.3 Functional Block Diagram
      2. 7.1.2 Peripheral Functional Description
        1. 7.1.2.1 Parity Error Detection
          1. 7.1.2.1.1 Parity Error Debug Register
        2. 7.1.2.2 Extension Mode
        3. 7.1.2.3 Initialization
        4. 7.1.2.4 TrustZone Watermarking
      3. 7.1.3 SRAM Registers
      4. 7.1.4 SRAMCTRL Registers
    2. 7.2 VIMS
      1. 7.2.1 Overview
        1. 7.2.1.1 Purpose of the Peripheral
        2. 7.2.1.2 Features
        3. 7.2.1.3 Functional Block Diagram
      2. 7.2.2 Peripheral Functional Description
        1. 7.2.2.1 Dedicated 8KB CPU Cache
        2. 7.2.2.2 Dedicated 2KB HSM Cache
        3. 7.2.2.3 Dedicated 128-Bit Line Buffer
        4. 7.2.2.4 ROM
        5. 7.2.2.5 Flash
        6. 7.2.2.6 Auxiliary Regions
        7. 7.2.2.7 Flash Partition and Protection
          1. 7.2.2.7.1 Main Region
          2. 7.2.2.7.2 Read Protection
          3. 7.2.2.7.3 Sticky Write/Erase Protection
        8. 7.2.2.8 TrustZoneTM Watermark
        9. 7.2.2.9 Debug Access
      3. 7.2.3 VIMS Registers
    3. 7.3 FLASH
      1. 7.3.1 FLASH Registers
  10. 8 Hardware Security Module (HSM)
    1. 8.1 Introduction
    2. 8.2 Overview
    3. 8.3 One-Time-Programmable (OTP) Controller
      1. 8.3.1 High-Level Sequence to Handle OTP Requests
    4. 8.4 Mailbox and Register Access Firewall
    5. 8.5 DMA Firewall
    6. 8.6 Coprocessor
    7. 8.7 HSM FW
      1. 8.7.1 Acquiring the Latest HSM FW
      2. 8.7.2 Programming HSM FW
      3. 8.7.3 Optional Customer Signing of HSM FW
    8. 8.8 HSM Registers
    9. 8.9 HSMCRYPTO Registers
  11. 9 Device Boot and Bootloader
    1. 9.1 Device Boot and Programming
      1. 9.1.1 Boot Flow
      2. 9.1.2 Boot Status
      3. 9.1.3 Boot Protection/Locking Mechanisms
      4. 9.1.4 Debug and Active SWD Connections at Boot
        1. 9.1.4.1 Secure Debug and Persistent Debug
      5. 9.1.5 Flashless Test Mode and Tools Client Mode
        1. 9.1.5.1 Flashless Test Mode
        2. 9.1.5.2 Tools Client Mode
      6. 9.1.6 Retest Mode and Return-to-Factory Procedure
      7. 9.1.7 Disabling SWD Debug Port
    2. 9.2 Flash Programming
      1. 9.2.1 CCFG
      2. 9.2.2 CCFG Permissions/Restrictions that Affect Flash Programming
      3. 9.2.3 SACI Flash Programming Commands
      4. 9.2.4 Flash Programming Flows
        1. 9.2.4.1 Initial Programming of a New Device
        2. 9.2.4.2 Reprogramming of Previously Programmed Device
        3. 9.2.4.3 Add User Record on Already Programmed Device as Part of Commissioning Step
        4. 9.2.4.4 Incrementally Program Ancillary Data to MAIN Flash Sectors of a Previously Programmed Device
        5. 9.2.4.5 Reprogramming of Only the Main Flash Application of a Previously Programmed Device
    3. 9.3 Device Management Command Interface
      1. 9.3.1 SACI Communication Protocol
        1. 9.3.1.1 Host Side Protocol
        2. 9.3.1.2 Command Format
        3. 9.3.1.3 Response Format
        4. 9.3.1.4 Response Result Field
        5. 9.3.1.5 Command Sequence Tag
        6. 9.3.1.6 Host Side Timeout
      2. 9.3.2 SACI Commands
        1. 9.3.2.1 Miscellaneous Commands
          1. 9.3.2.1.1 SACI_CMD_MISC_NO_OPERATION
          2. 9.3.2.1.2 SACI_CMD_MISC_GET_DIE_ID
          3. 9.3.2.1.3 SACI_CMD_MISC_GET_CCFG_USER_REC
          4. 9.3.2.1.4 SACI_CMD_GET_SECBOOT_HSMFW_UPDATE_STATUS
          5. 9.3.2.1.5 SACI_CMD_HSM_GET_SYS_INFO
        2. 9.3.2.2 Debug Commands
          1. 9.3.2.2.1 SACI_CMD_DEBUG_EXIT_SACI_HALT
          2. 9.3.2.2.2 SACI_CMD_DEBUG_EXIT_SACI_SHUTDOWN
          3. 9.3.2.2.3 SACI_CMD_DEBUG_REQ_KEY_ID
          4. 9.3.2.2.4 SACI_CMD_DEBUG_REQ_CHALLENGE
          5. 9.3.2.2.5 SACI_CMD_DEBUG_SUBMIT_CHALLENGE_RESP
          6. 9.3.2.2.6 SACI_CMD_DEBUG_CLOSE_SESSION
          7. 9.3.2.2.7 SACI_CMD_BLDR_APP_RESET_DEVICE
          8. 9.3.2.2.8 SACI_CMD_BLDR_APP_EXIT_SACI_RUN
        3. 9.3.2.3 Flash Programming Commands
          1. 9.3.2.3.1  SACI_CMD_FLASH_ERASE_CHIP
          2. 9.3.2.3.2  SACI_CMD_FLASH_ERASE_MAIN_APP
          3. 9.3.2.3.3  SACI_CMD_FLASH_PROG_CCFG_SECTOR
          4. 9.3.2.3.4  SACI_CMD_FLASH_PROG_CCFG_USER_REC
          5. 9.3.2.3.5  SACI_CMD_FLASH_PROG_SCFG_SECTOR
          6. 9.3.2.3.6  SACI_CMD_FLASH_PROG_MAIN_SECTOR
          7. 9.3.2.3.7  SACI_CMD_FLASH_PROG_MAIN_PIPELINED
          8. 9.3.2.3.8  SACI_CMD_FLASH_VERIFY_MAIN_SECTORS
          9. 9.3.2.3.9  SACI_CMD_FLASH_VERIFY_CCFG_SECTOR
          10. 9.3.2.3.10 SACI_CMD_FLASH_VERIFY_SCFG_SECTOR
    4. 9.4 Bootloader Support
      1. 9.4.1 Bootloader v.s Secure Boot
    5. 9.5 ROM Serial Bootloader
      1. 9.5.1 ROM Serial Bootloader Interfaces
        1. 9.5.1.1 Packet Handling
          1. 9.5.1.1.1 Packet Acknowledge and Not-Acknowledge Bytes
        2. 9.5.1.2 Transport Layer
          1. 9.5.1.2.1 UART Transport
            1. 9.5.1.2.1.1 UART Baud Rate Automatic Detection
          2. 9.5.1.2.2 SPI Transport
      2. 9.5.2 ROM Serial Bootloader Parameters
      3. 9.5.3 ROM Serial Bootloader Commands
        1. 9.5.3.1 BLDR_CMD_PING
        2. 9.5.3.2 BLDR_CMD_GET_STATUS
        3. 9.5.3.3 BLDR_CMD_GET_PART_ID
        4. 9.5.3.4 BLDR_CMD_RESET
        5. 9.5.3.5 BLDR_CMD_CHIP_ERASE
        6. 9.5.3.6 BLDR_CMD_CRC32
        7. 9.5.3.7 BLDR_CMD_DOWNLOAD
        8. 9.5.3.8 BLDR_CMD_DOWNLOAD_CRC
        9. 9.5.3.9 BLDR_CMD_SEND_DATA
      4. 9.5.4 Bootloader Firmware Update Example
  12. 10Device Configuration
    1. 10.1 Guidelines for Securely Configuring Your Device
      1. 10.1.1 Enabling and Configuring Secure Boot
      2. 10.1.2 Configure Debug Access
      3. 10.1.3 Configure Flash Protections
      4. 10.1.4 Configure Device Permissions
      5. 10.1.5 Configure HSM FW Update Keys
      6. 10.1.6 Configure emSensor
    2. 10.2 Factory Configuration (FCFG)
    3. 10.3 Customer Configuration (CCFG)
    4. 10.4 Security Configuration (SCFG)
  13. 11Secure Boot
    1. 11.1  Secure Boot
    2. 11.2  Execution Flow
    3. 11.3  ROM API
      1. 11.3.1 HAPI (Hardware API)
      2. 11.3.2 Registers
    4. 11.4  Configuration
      1. 11.4.1 Slot Configuration
      2. 11.4.2 Policy
        1. 11.4.2.1 Authentication Method
        2. 11.4.2.2 Authentication Algorithm
        3. 11.4.2.3 Update Mode
          1. 11.4.2.3.1 Overwrite
          2. 11.4.2.3.2 XIP Revert Enabled/Disabled
      3. 11.4.3 Key Update Key Hash
      4. 11.4.4 Key Ring
      5. 11.4.5 Boot Seed
    5. 11.5  Generic Image Format
    6. 11.6  Application Update
      1. 11.6.1 Image Format
    7. 11.7  Secondary Secure Bootloader Update
      1. 11.7.1 Image Format
      2. 11.7.2 Update Pattern
    8. 11.8  Key Update
      1. 11.8.1 Image Format
    9. 11.9  Antirollback
    10. 11.10 Version Log (VLOG)
      1. 11.10.1 Record structure
    11. 11.11 Fallback
    12. 11.12 ROM Panic
  14. 12General Purpose Timers (LGPT)
    1. 12.1 Overview
    2. 12.2 Block Diagram
    3. 12.3 Functional Description
      1. 12.3.1  Prescaler
      2. 12.3.2  Counter
      3. 12.3.3  Target
      4. 12.3.4  Channel Input Logic
      5. 12.3.5  Channel Output Logic
      6. 12.3.6  Channel Actions
        1. 12.3.6.1 Period and Pulse Width Measurement
        2. 12.3.6.2 Clear on Zero, Toggle on Compare Repeatedly
        3. 12.3.6.3 Set on Zero, Toggle on Compare Repeatedly
      7. 12.3.7  Channel Capture Configuration
      8. 12.3.8  Channel Filters
        1. 12.3.8.1 Setting up the Channel Filters
      9. 12.3.9  Synchronize Multiple LGPT Timers
      10. 12.3.10 Interrupts, ADC Trigger, and DMA Request
    4. 12.4 Timer Modes
      1. 12.4.1 Quadrature Decoder
      2. 12.4.2 DMA
      3. 12.4.3 IR Generation
      4. 12.4.4 Fault and Park
      5. 12.4.5 Deadband
      6. 12.4.6 Deadband, Fault, and Park
      7. 12.4.7 Example Application: Brushless DC (BLDC) Motor
    5. 12.5 LGPT0 Registers
    6. 12.6 LGPT1 Registers
    7. 12.7 LGPT2 Registers
    8. 12.8 LGPT3 Registers
  15. 13Algorithm Processing Unit (APU)
    1. 13.1 Introduction
    2. 13.2 APU Related Collateral
    3. 13.3 Functional Description
    4. 13.4 APU Operation
    5. 13.5 Interrupts and Events
    6. 13.6 Data Representation
    7. 13.7 Data Memory
    8. 13.8 Software
    9. 13.9 APU Registers
  16. 14Voltage Glitch Monitor (VGM)
    1. 14.1 Overview
    2. 14.2 Features and Operation
  17. 15System Timer (SYSTIM)
    1. 15.1 Overview
    2. 15.2 Block Diagram
    3. 15.3 Functional Description
      1. 15.3.1 Common Channel Features
        1. 15.3.1.1 Compare Mode
        2. 15.3.1.2 Capture Mode
        3. 15.3.1.3 Additional Channel Arming Methods
      2. 15.3.2 Interrupts and Events
    4. 15.4 SYSTIM Registers
  18. 16Real Time Clock (RTC)
    1. 16.1 Introduction
    2. 16.2 Block Diagram
    3. 16.3 Interrupts and Events
      1. 16.3.1 Input Event
      2. 16.3.2 Output Event
      3. 16.3.3 Arming and Disarming Channels
    4. 16.4 CAPTURE and COMPARE Configurations
      1. 16.4.1 CHANNEL 0 - COMPARE CHANNEL
      2. 16.4.2 CHANNEL 1—CAPTURE CHANNEL
    5. 16.5 RTC Registers
  19. 17Low Power Comparator (SYS0)
    1. 17.1 Introduction
    2. 17.2 Block Diagram
    3. 17.3 Functional Description
      1. 17.3.1 Input Selection
      2. 17.3.2 Voltage Divider
      3. 17.3.3 Hysteresis
      4. 17.3.4 Wake-Up
    4. 17.4 SYS0 Registers
  20. 18Battery Monitor, Temperature Sensor, and DCDC Controller (PMUD)
    1. 18.1 Introduction
    2. 18.2 Functional Description
      1. 18.2.1 BATMON
      2. 18.2.2 DCDC
    3. 18.3 PMUD Registers
  21. 19Micro Direct Memory Access (µDMA)
    1. 19.1 Introduction
    2. 19.2 Block Diagram
    3. 19.3 Functional Description
      1. 19.3.1  Channel Assignments
      2. 19.3.2  Priority
      3. 19.3.3  Arbitration Size
      4. 19.3.4  Request Types
        1. 19.3.4.1 Single Request
        2. 19.3.4.2 Burst Request
      5. 19.3.5  Channel Configuration
      6. 19.3.6  Transfer Modes
        1. 19.3.6.1 Stop Mode
        2. 19.3.6.2 Basic Mode
        3. 19.3.6.3 Auto Mode
        4. 19.3.6.4 Ping-Pong Mode
        5. 19.3.6.5 Memory Scatter-Gather Mode
        6. 19.3.6.6 Peripheral Scatter-Gather Mode
      7. 19.3.7  Transfer Size and Increments
      8. 19.3.8  Peripheral Interface
      9. 19.3.9  Software Request
      10. 19.3.10 Interrupts and Errors
      11. 19.3.11 Initialization and Configuration
        1. 19.3.11.1 Module Initialization
        2. 19.3.11.2 Configuring a Memory-to-Memory Transfer
        3. 19.3.11.3 Configure the Channel Attributes
        4. 19.3.11.4 Configure the Channel Control Structure
        5. 19.3.11.5 Start the Transfer
        6. 19.3.11.6 Software Considerations
    4. 19.4 DMA Registers
  22. 20Advanced Encryption Standard (AES)
    1. 20.1 Introduction
      1. 20.1.1 AES Performance
    2. 20.2 Functional Description
      1. 20.2.1 Reset Considerations
      2. 20.2.2 Interrupt and Event Support
        1. 20.2.2.1 Interrupt Events and Requests
        2. 20.2.2.2 Connection to Event Fabric
      3. 20.2.3 µDMA
        1. 20.2.3.1 µDMA Example
    3. 20.3 Encryption and Decryption Configuration
      1. 20.3.1  CBC-MAC (Cipher Block Chaining-Message Authentication Code)
      2. 20.3.2  CBC (Cipher Block Chaining) Encryption
      3. 20.3.3  CBC Decryption
      4. 20.3.4  CTR (Counter) Encryption/Decryption
      5. 20.3.5  ECB (Electronic Code Book) Encryption
      6. 20.3.6  ECB Decryption
      7. 20.3.7  CFB (Cipher Feedback) Encryption
      8. 20.3.8  CFB Decryption
      9. 20.3.9  OFB (Open Feedback) Encryption
      10. 20.3.10 OFB Decryption
      11. 20.3.11 PCBC (Propagating Cipher Block Chaining) Encryption
      12. 20.3.12 PCBC Decryption
      13. 20.3.13 CTR-DRBG (Counter-Deterministic Random Bit Generator)
      14. 20.3.14 CCM
    4. 20.4 AES Registers
    5. 20.5 CRYPTO Registers
  23. 21Analog to Digital Converter (ADC)
    1. 21.1 Overview
    2. 21.2 Block Diagram
    3. 21.3 Functional Description
      1. 21.3.1  ADC Core
      2. 21.3.2  Voltage Reference Options
      3. 21.3.3  Resolution Modes
      4. 21.3.4  ADC Clocking
      5. 21.3.5  Power Down Behavior
      6. 21.3.6  Sampling Trigger Sources and Sampling Modes
        1. 21.3.6.1 AUTO Sampling Mode
        2. 21.3.6.2 MANUAL Sampling Mode
      7. 21.3.7  Sampling Period
      8. 21.3.8  Conversion Modes
      9. 21.3.9  ADC Data Format
      10. 21.3.10 Status Register
      11. 21.3.11 ADC Events
        1. 21.3.11.1 CPU Interrupt Event Publisher (INT_EVENT0)
        2. 21.3.11.2 Generic Event Publisher (INT_EVENT1)
        3. 21.3.11.3 DMA Trigger Event Publisher (INT_EVENT2)
        4. 21.3.11.4 Generic Event Subscriber
    4. 21.4 Advanced Features
      1. 21.4.1 Window Comparator
      2. 21.4.2 DMA & FIFO Operation
        1. 21.4.2.1 DMA/CPU Operation in Non-FIFO Mode (FIFOEN=0)
        2. 21.4.2.2 DMA/CPU Operation in FIFO Mode (FIFOEN=1)
        3. 21.4.2.3 DMA/CPU Operation Summary Matrix
      3. 21.4.3 Ad-hoc Single Conversion
    5. 21.5 ADC Registers
  24. 22I/O Controller (IOC)
    1. 22.1  Introduction
    2. 22.2  Block Diagram
    3. 22.3  I/O Mapping and Configuration
      1. 22.3.1 Basic I/O Mapping
      2. 22.3.2 Radio GPO
      3. 22.3.3 Pin Mapping
      4. 22.3.4 DTB Muxing
    4. 22.4  Edge Detection
    5. 22.5  GPIO
    6. 22.6  I/O Pins
    7. 22.7  Unused Pins
    8. 22.8  Debug Configuration
    9. 22.9  IOC Registers
    10. 22.10 GPIO Registers
  25. 23Universal Asynchronous Receiver/Transmitter (UART-LIN)
    1. 23.1 Introduction
    2. 23.2 Block Diagram
    3. 23.3 UART Functional Description
      1. 23.3.1 Transmit and Receive Logic
      2. 23.3.2 Baud Rate Generation
      3. 23.3.3 FIFO Operation
        1. 23.3.3.1 FIFO Remapping
      4. 23.3.4 Data Transmission
      5. 23.3.5 Flow Control
      6. 23.3.6 IrDA Encoding and Decoding
      7. 23.3.7 Interrupts
      8. 23.3.8 Loopback Operation
    4. 23.4 UART-LIN Specification
      1. 23.4.1 Break transmission in UART mode
      2. 23.4.2 Break reception in UART mode
      3. 23.4.3 Break/Synch transmission in LIN mode
      4. 23.4.4 Break/Synch reception in LIN mode
      5. 23.4.5 Dormant mode operation
      6. 23.4.6 Wakeup signal generation
      7. 23.4.7 Wakeup signal detection when device is in active/idle modes
      8. 23.4.8 Wakeup signal detection when device is in standby mode
    5. 23.5 Interface to µDMA
    6. 23.6 Initialization and Configuration
    7. 23.7 UART Registers
  26. 24Serial Peripheral Interface (SPI)
    1. 24.1 Overview
      1. 24.1.1 Features
      2. 24.1.2 Block Diagram
    2. 24.2 Signal Description
    3. 24.3 Functional Description
      1. 24.3.1  Clock Control
      2. 24.3.2  FIFO Operation
        1. 24.3.2.1 Transmit FIFO
        2. 24.3.2.2 Repeated Transmit Operation
        3. 24.3.2.3 Receive FIFO
        4. 24.3.2.4 FIFO Flush
      3. 24.3.3  Interrupts
      4. 24.3.4  Data Format
      5. 24.3.5  Delayed Data Sampling
      6. 24.3.6  Chip Select Control
      7. 24.3.7  Command Data Control
      8. 24.3.8  Protocol Descriptions
        1. 24.3.8.1 Motorola SPI Frame Format
        2. 24.3.8.2 Texas Instruments Synchronous Serial Frame Format
        3. 24.3.8.3 MICROWIRE Frame Format
      9. 24.3.9  CRC Configuration
      10. 24.3.10 Auto CRC Functionality
      11. 24.3.11 Auto Header Functionality
      12. 24.3.12 SPI Status
      13. 24.3.13 Debug Halt
    4. 24.4 µDMA Operation
    5. 24.5 Initialization and Configuration
    6. 24.6 SPI Registers
  27. 25Inter-Integrated Circuit (I2C)
    1. 25.1 Introduction
    2. 25.2 Block Diagram
    3. 25.3 Functional Description
      1. 25.3.1 Functional Overview
        1. 25.3.1.1 Start and Stop Conditions
        2. 25.3.1.2 Data Format with 7-Bit Address
        3. 25.3.1.3 Data Validity
        4. 25.3.1.4 Acknowledge
        5. 25.3.1.5 Arbitration
      2. 25.3.2 Available Speed Modes
      3. 25.3.3 Interrupts
        1. 25.3.3.1 I2C Controller Interrupts
        2. 25.3.3.2 I2C Target Interrupts
      4. 25.3.4 Loopback Operation
      5. 25.3.5 Command Sequence Flowcharts
        1. 25.3.5.1 I2C Controller Command Sequences
        2. 25.3.5.2 I2C Target Command Sequences
    4. 25.4 Initialization and Configuration
    5. 25.5 I2C Registers
  28. 26Inter-IC Sound (I2S)
    1. 26.1  Introduction
    2. 26.2  Block Diagram
    3. 26.3  Clock Architecture
    4. 26.4  Signal Descriptions
    5. 26.5  Functional Description
      1. 26.5.1 Pin Configuration
      2. 26.5.2 Serial Format Configuration
      3. 26.5.3 I2S Format Schematic
        1. 26.5.3.1 Register Configuration
      4. 26.5.4 Left-Justified (LJF)
        1. 26.5.4.1 Register Configuration
      5. 26.5.5 Right-Justified (RJF)
        1. 26.5.5.1 Register Configuration
      6. 26.5.6 DSP
        1. 26.5.6.1 Register Configuration
      7. 26.5.7 Clock Configuration
    6. 26.6  Memory Interface
      1. 26.6.1 Sample Word Length
      2. 26.6.2 Padding Mechanism
      3. 26.6.3 Channel Mapping
      4. 26.6.4 Sample Storage in Memory
      5. 26.6.5 DMA Operation
        1. 26.6.5.1 Start-Up
        2. 26.6.5.2 Operation
        3. 26.6.5.3 Shutdown
    7. 26.7  Samplestamp Generator
      1. 26.7.1 Samplestamp Counters
      2. 26.7.2 Start-Up Triggers
      3. 26.7.3 Samplestamp Capture
      4. 26.7.4 Achieving Constant Audio Latency
    8. 26.8  Error Detection
    9. 26.9  Usage
      1. 26.9.1 Start-Up Sequence
      2. 26.9.2 Shutdown Sequence
    10. 26.10 I2S Configuration Guideline
    11. 26.11 I2S Registers
  29. 27CAN-FD
    1. 27.1 Introduction
    2. 27.2 Functions
    3. 27.3 MCAN Subsystem
    4. 27.4 MCAN Functional Description
      1. 27.4.1 Operating Modes
        1. 27.4.1.1 Software Initialization
        2. 27.4.1.2 Normal Operation
        3. 27.4.1.3 CAN FD Operation
        4. 27.4.1.4 Transmitter Delay Compensation
          1. 27.4.1.4.1 Description
          2. 27.4.1.4.2 Transmitter Delay Compensation Measurement
        5. 27.4.1.5 Restricted Operation Mode
        6. 27.4.1.6 Bus Monitoring Mode
        7. 27.4.1.7 Disabled Automatic Retransmission
          1. 27.4.1.7.1 Frame Transmission in DAR Mode
        8. 27.4.1.8 Power Down (Sleep Mode)
          1. 27.4.1.8.1 MCAN Clock Stop and Wake Operations
          2. 27.4.1.8.2 MCAN Debug Suspend Operation
        9. 27.4.1.9 Test Modes
          1. 27.4.1.9.1 External Loop Back Mode
          2. 27.4.1.9.2 Internal Loop Back Mode
      2. 27.4.2 Timestamp Generation
        1. 27.4.2.1 External Timestamp Counter
        2. 27.4.2.2 Block Diagram
      3. 27.4.3 Timeout Counter
      4. 27.4.4 Rx Handling
        1. 27.4.4.1 Acceptance Filtering
          1. 27.4.4.1.1 Range Filter
          2. 27.4.4.1.2 Filter for specific IDs
          3. 27.4.4.1.3 Classic Bit Mask Filter
          4. 27.4.4.1.4 Standard Message ID Filtering
          5. 27.4.4.1.5 Extended Message ID Filtering
        2. 27.4.4.2 Rx FIFOs
          1. 27.4.4.2.1 Rx FIFO Blocking Mode
          2. 27.4.4.2.2 Rx FIFO Overwrite Mode
        3. 27.4.4.3 Dedicated Rx Buffers
          1. 27.4.4.3.1 Rx Buffer Handling
        4. 27.4.4.4 Debug on CAN Support
          1. 27.4.4.4.1 Filtering for Debug Messages
          2. 27.4.4.4.2 Debug Message Handling
      5. 27.4.5 Tx Handling
        1. 27.4.5.1 Transmit Pause
        2. 27.4.5.2 Dedicated Tx Buffers
        3. 27.4.5.3 Tx FIFO
        4. 27.4.5.4 Tx Queue
        5. 27.4.5.5 Mixed Dedicated Tx Buffers / Tx FIFO
        6. 27.4.5.6 Mixed Dedicated Tx Buffers / Tx Queue
        7. 27.4.5.7 Transmit Cancellation
        8. 27.4.5.8 Tx Event Handling
      6. 27.4.6 FIFO Acknowledge Handling
      7. 27.4.7 MCAN Message RAM
        1. 27.4.7.1 Message RAM Configuration
        2. 27.4.7.2 Rx Buffer and FIFO Element
        3. 27.4.7.3 Tx Buffer Element
        4. 27.4.7.4 Tx Event FIFO Element
        5. 27.4.7.5 Standard Message ID Filter Element
        6. 27.4.7.6 Extended Message ID Filter Element
      8. 27.4.8 Interrupt Requests
    5. 27.5 CC27xx MCAN Wrapper
    6. 27.6 MCAN Clock Enable
    7. 27.7 Additional Notes
    8. 27.8 CANFD Registers
  30. 28Radio
    1. 28.1  Introduction
    2. 28.2  Block Diagram
    3. 28.3  Overview
      1. 28.3.1 Radio Sub-Domains
      2. 28.3.2 Radio RAMs
      3. 28.3.3 Doorbell (DBELL)
        1. 28.3.3.1 Interrupts
        2. 28.3.3.2 GPIO Control
        3. 28.3.3.3 SYSTIM Interface
    4. 28.4  Radio Usage Model
      1. 28.4.1 CRC and Whitening
    5. 28.5  LRFDDBELL Registers
    6. 28.6  LRFDMDM32 Registers
    7. 28.7  LRFDPBE Registers
    8. 28.8  LRFDPBE32 Registers
    9. 28.9  LRFDRFE Registers
    10. 28.10 LRFDRFE32 Registers
    11. 28.11 LRFDRXF Registers
    12. 28.12 LRFDS2R Registers
    13. 28.13 LRFDTRC Registers
    14. 28.14 LRFDTXF Registers
  31. 29Revision History

2.7.9 ITM Registers

Table 2-147 lists the memory-mapped registers for the ITM registers. All register offset addresses not listed in Table 2-147 should be considered as reserved locations and the register contents should not be modified.

Table 2-147 ITM Registers
OffsetAcronymRegister NameSection
0hITM Stimulus Port Register 0Provides the interface for generating Instrumentation packetsSection 2.7.9.1
4hITM Stimulus Port Register 1Provides the interface for generating Instrumentation packetsSection 2.7.9.2
8hITM Stimulus Port Register 2Provides the interface for generating Instrumentation packetsSection 2.7.9.3
ChITM Stimulus Port Register 3Provides the interface for generating Instrumentation packetsSection 2.7.9.4
10hITM Stimulus Port Register 4Provides the interface for generating Instrumentation packetsSection 2.7.9.5
14hITM Stimulus Port Register 5Provides the interface for generating Instrumentation packetsSection 2.7.9.6
18hITM Stimulus Port Register 6Provides the interface for generating Instrumentation packetsSection 2.7.9.7
1ChITM Stimulus Port Register 7Provides the interface for generating Instrumentation packetsSection 2.7.9.8
20hITM Stimulus Port Register 8Provides the interface for generating Instrumentation packetsSection 2.7.9.9
24hITM Stimulus Port Register 9Provides the interface for generating Instrumentation packetsSection 2.7.9.10
28hITM Stimulus Port Register 10Provides the interface for generating Instrumentation packetsSection 2.7.9.11
2ChITM Stimulus Port Register 11Provides the interface for generating Instrumentation packetsSection 2.7.9.12
30hITM Stimulus Port Register 12Provides the interface for generating Instrumentation packetsSection 2.7.9.13
34hITM Stimulus Port Register 13Provides the interface for generating Instrumentation packetsSection 2.7.9.14
38hITM Stimulus Port Register 14Provides the interface for generating Instrumentation packetsSection 2.7.9.15
3ChITM Stimulus Port Register 15Provides the interface for generating Instrumentation packetsSection 2.7.9.16
40hITM Stimulus Port Register 16Provides the interface for generating Instrumentation packetsSection 2.7.9.17
44hITM Stimulus Port Register 17Provides the interface for generating Instrumentation packetsSection 2.7.9.18
48hITM Stimulus Port Register 18Provides the interface for generating Instrumentation packetsSection 2.7.9.19
4ChITM Stimulus Port Register 19Provides the interface for generating Instrumentation packetsSection 2.7.9.20
50hITM Stimulus Port Register 20Provides the interface for generating Instrumentation packetsSection 2.7.9.21
54hITM Stimulus Port Register 21Provides the interface for generating Instrumentation packetsSection 2.7.9.22
58hITM Stimulus Port Register 22Provides the interface for generating Instrumentation packetsSection 2.7.9.23
5ChITM Stimulus Port Register 23Provides the interface for generating Instrumentation packetsSection 2.7.9.24
60hITM Stimulus Port Register 24Provides the interface for generating Instrumentation packetsSection 2.7.9.25
64hITM Stimulus Port Register 25Provides the interface for generating Instrumentation packetsSection 2.7.9.26
68hITM Stimulus Port Register 26Provides the interface for generating Instrumentation packetsSection 2.7.9.27
6ChITM Stimulus Port Register 27Provides the interface for generating Instrumentation packetsSection 2.7.9.28
70hITM Stimulus Port Register 28Provides the interface for generating Instrumentation packetsSection 2.7.9.29
74hITM Stimulus Port Register 29Provides the interface for generating Instrumentation packetsSection 2.7.9.30
78hITM Stimulus Port Register 30Provides the interface for generating Instrumentation packetsSection 2.7.9.31
7ChITM Stimulus Port Register 31Provides the interface for generating Instrumentation packetsSection 2.7.9.32
80hITM Stimulus Port Register 32Provides the interface for generating Instrumentation packetsSection 2.7.9.33
84hITM Stimulus Port Register 33Provides the interface for generating Instrumentation packetsSection 2.7.9.34
88hITM Stimulus Port Register 34Provides the interface for generating Instrumentation packetsSection 2.7.9.35
8ChITM Stimulus Port Register 35Provides the interface for generating Instrumentation packetsSection 2.7.9.36
90hITM Stimulus Port Register 36Provides the interface for generating Instrumentation packetsSection 2.7.9.37
94hITM Stimulus Port Register 37Provides the interface for generating Instrumentation packetsSection 2.7.9.38
98hITM Stimulus Port Register 38Provides the interface for generating Instrumentation packetsSection 2.7.9.39
9ChITM Stimulus Port Register 39Provides the interface for generating Instrumentation packetsSection 2.7.9.40
A0hITM Stimulus Port Register 40Provides the interface for generating Instrumentation packetsSection 2.7.9.41
A4hITM Stimulus Port Register 41Provides the interface for generating Instrumentation packetsSection 2.7.9.42
A8hITM Stimulus Port Register 42Provides the interface for generating Instrumentation packetsSection 2.7.9.43
AChITM Stimulus Port Register 43Provides the interface for generating Instrumentation packetsSection 2.7.9.44
B0hITM Stimulus Port Register 44Provides the interface for generating Instrumentation packetsSection 2.7.9.45
B4hITM Stimulus Port Register 45Provides the interface for generating Instrumentation packetsSection 2.7.9.46
B8hITM Stimulus Port Register 46Provides the interface for generating Instrumentation packetsSection 2.7.9.47
BChITM Stimulus Port Register 47Provides the interface for generating Instrumentation packetsSection 2.7.9.48
C0hITM Stimulus Port Register 48Provides the interface for generating Instrumentation packetsSection 2.7.9.49
C4hITM Stimulus Port Register 49Provides the interface for generating Instrumentation packetsSection 2.7.9.50
C8hITM Stimulus Port Register 50Provides the interface for generating Instrumentation packetsSection 2.7.9.51
CChITM Stimulus Port Register 51Provides the interface for generating Instrumentation packetsSection 2.7.9.52
D0hITM Stimulus Port Register 52Provides the interface for generating Instrumentation packetsSection 2.7.9.53
D4hITM Stimulus Port Register 53Provides the interface for generating Instrumentation packetsSection 2.7.9.54
D8hITM Stimulus Port Register 54Provides the interface for generating Instrumentation packetsSection 2.7.9.55
DChITM Stimulus Port Register 55Provides the interface for generating Instrumentation packetsSection 2.7.9.56
E0hITM Stimulus Port Register 56Provides the interface for generating Instrumentation packetsSection 2.7.9.57
E4hITM Stimulus Port Register 57Provides the interface for generating Instrumentation packetsSection 2.7.9.58
E8hITM Stimulus Port Register 58Provides the interface for generating Instrumentation packetsSection 2.7.9.59
EChITM Stimulus Port Register 59Provides the interface for generating Instrumentation packetsSection 2.7.9.60
F0hITM Stimulus Port Register 60Provides the interface for generating Instrumentation packetsSection 2.7.9.61
F4hITM Stimulus Port Register 61Provides the interface for generating Instrumentation packetsSection 2.7.9.62
F8hITM Stimulus Port Register 62Provides the interface for generating Instrumentation packetsSection 2.7.9.63
FChITM Stimulus Port Register 63Provides the interface for generating Instrumentation packetsSection 2.7.9.64
100hITM Stimulus Port Register 64Provides the interface for generating Instrumentation packetsSection 2.7.9.65
104hITM Stimulus Port Register 65Provides the interface for generating Instrumentation packetsSection 2.7.9.66
108hITM Stimulus Port Register 66Provides the interface for generating Instrumentation packetsSection 2.7.9.67
10ChITM Stimulus Port Register 67Provides the interface for generating Instrumentation packetsSection 2.7.9.68
110hITM Stimulus Port Register 68Provides the interface for generating Instrumentation packetsSection 2.7.9.69
114hITM Stimulus Port Register 69Provides the interface for generating Instrumentation packetsSection 2.7.9.70
118hITM Stimulus Port Register 70Provides the interface for generating Instrumentation packetsSection 2.7.9.71
11ChITM Stimulus Port Register 71Provides the interface for generating Instrumentation packetsSection 2.7.9.72
120hITM Stimulus Port Register 72Provides the interface for generating Instrumentation packetsSection 2.7.9.73
124hITM Stimulus Port Register 73Provides the interface for generating Instrumentation packetsSection 2.7.9.74
128hITM Stimulus Port Register 74Provides the interface for generating Instrumentation packetsSection 2.7.9.75
12ChITM Stimulus Port Register 75Provides the interface for generating Instrumentation packetsSection 2.7.9.76
130hITM Stimulus Port Register 76Provides the interface for generating Instrumentation packetsSection 2.7.9.77
134hITM Stimulus Port Register 77Provides the interface for generating Instrumentation packetsSection 2.7.9.78
138hITM Stimulus Port Register 78Provides the interface for generating Instrumentation packetsSection 2.7.9.79
13ChITM Stimulus Port Register 79Provides the interface for generating Instrumentation packetsSection 2.7.9.80
140hITM Stimulus Port Register 80Provides the interface for generating Instrumentation packetsSection 2.7.9.81
144hITM Stimulus Port Register 81Provides the interface for generating Instrumentation packetsSection 2.7.9.82
148hITM Stimulus Port Register 82Provides the interface for generating Instrumentation packetsSection 2.7.9.83
14ChITM Stimulus Port Register 83Provides the interface for generating Instrumentation packetsSection 2.7.9.84
150hITM Stimulus Port Register 84Provides the interface for generating Instrumentation packetsSection 2.7.9.85
154hITM Stimulus Port Register 85Provides the interface for generating Instrumentation packetsSection 2.7.9.86
158hITM Stimulus Port Register 86Provides the interface for generating Instrumentation packetsSection 2.7.9.87
15ChITM Stimulus Port Register 87Provides the interface for generating Instrumentation packetsSection 2.7.9.88
160hITM Stimulus Port Register 88Provides the interface for generating Instrumentation packetsSection 2.7.9.89
164hITM Stimulus Port Register 89Provides the interface for generating Instrumentation packetsSection 2.7.9.90
168hITM Stimulus Port Register 90Provides the interface for generating Instrumentation packetsSection 2.7.9.91
16ChITM Stimulus Port Register 91Provides the interface for generating Instrumentation packetsSection 2.7.9.92
170hITM Stimulus Port Register 92Provides the interface for generating Instrumentation packetsSection 2.7.9.93
174hITM Stimulus Port Register 93Provides the interface for generating Instrumentation packetsSection 2.7.9.94
178hITM Stimulus Port Register 94Provides the interface for generating Instrumentation packetsSection 2.7.9.95
17ChITM Stimulus Port Register 95Provides the interface for generating Instrumentation packetsSection 2.7.9.96
180hITM Stimulus Port Register 96Provides the interface for generating Instrumentation packetsSection 2.7.9.97
184hITM Stimulus Port Register 97Provides the interface for generating Instrumentation packetsSection 2.7.9.98
188hITM Stimulus Port Register 98Provides the interface for generating Instrumentation packetsSection 2.7.9.99
18ChITM Stimulus Port Register 99Provides the interface for generating Instrumentation packetsSection 2.7.9.100
190hITM Stimulus Port Register 100Provides the interface for generating Instrumentation packetsSection 2.7.9.101
194hITM Stimulus Port Register 101Provides the interface for generating Instrumentation packetsSection 2.7.9.102
198hITM Stimulus Port Register 102Provides the interface for generating Instrumentation packetsSection 2.7.9.103
19ChITM Stimulus Port Register 103Provides the interface for generating Instrumentation packetsSection 2.7.9.104
1A0hITM Stimulus Port Register 104Provides the interface for generating Instrumentation packetsSection 2.7.9.105
1A4hITM Stimulus Port Register 105Provides the interface for generating Instrumentation packetsSection 2.7.9.106
1A8hITM Stimulus Port Register 106Provides the interface for generating Instrumentation packetsSection 2.7.9.107
1AChITM Stimulus Port Register 107Provides the interface for generating Instrumentation packetsSection 2.7.9.108
1B0hITM Stimulus Port Register 108Provides the interface for generating Instrumentation packetsSection 2.7.9.109
1B4hITM Stimulus Port Register 109Provides the interface for generating Instrumentation packetsSection 2.7.9.110
1B8hITM Stimulus Port Register 110Provides the interface for generating Instrumentation packetsSection 2.7.9.111
1BChITM Stimulus Port Register 111Provides the interface for generating Instrumentation packetsSection 2.7.9.112
1C0hITM Stimulus Port Register 112Provides the interface for generating Instrumentation packetsSection 2.7.9.113
1C4hITM Stimulus Port Register 113Provides the interface for generating Instrumentation packetsSection 2.7.9.114
1C8hITM Stimulus Port Register 114Provides the interface for generating Instrumentation packetsSection 2.7.9.115
1CChITM Stimulus Port Register 115Provides the interface for generating Instrumentation packetsSection 2.7.9.116
1D0hITM Stimulus Port Register 116Provides the interface for generating Instrumentation packetsSection 2.7.9.117
1D4hITM Stimulus Port Register 117Provides the interface for generating Instrumentation packetsSection 2.7.9.118
1D8hITM Stimulus Port Register 118Provides the interface for generating Instrumentation packetsSection 2.7.9.119
1DChITM Stimulus Port Register 119Provides the interface for generating Instrumentation packetsSection 2.7.9.120
1E0hITM Stimulus Port Register 120Provides the interface for generating Instrumentation packetsSection 2.7.9.121
1E4hITM Stimulus Port Register 121Provides the interface for generating Instrumentation packetsSection 2.7.9.122
1E8hITM Stimulus Port Register 122Provides the interface for generating Instrumentation packetsSection 2.7.9.123
1EChITM Stimulus Port Register 123Provides the interface for generating Instrumentation packetsSection 2.7.9.124
1F0hITM Stimulus Port Register 124Provides the interface for generating Instrumentation packetsSection 2.7.9.125
1F4hITM Stimulus Port Register 125Provides the interface for generating Instrumentation packetsSection 2.7.9.126
1F8hITM Stimulus Port Register 126Provides the interface for generating Instrumentation packetsSection 2.7.9.127
1FChITM Stimulus Port Register 127Provides the interface for generating Instrumentation packetsSection 2.7.9.128
200hITM Stimulus Port Register 128Provides the interface for generating Instrumentation packetsSection 2.7.9.129
204hITM Stimulus Port Register 129Provides the interface for generating Instrumentation packetsSection 2.7.9.130
208hITM Stimulus Port Register 130Provides the interface for generating Instrumentation packetsSection 2.7.9.131
20ChITM Stimulus Port Register 131Provides the interface for generating Instrumentation packetsSection 2.7.9.132
210hITM Stimulus Port Register 132Provides the interface for generating Instrumentation packetsSection 2.7.9.133
214hITM Stimulus Port Register 133Provides the interface for generating Instrumentation packetsSection 2.7.9.134
218hITM Stimulus Port Register 134Provides the interface for generating Instrumentation packetsSection 2.7.9.135
21ChITM Stimulus Port Register 135Provides the interface for generating Instrumentation packetsSection 2.7.9.136
220hITM Stimulus Port Register 136Provides the interface for generating Instrumentation packetsSection 2.7.9.137
224hITM Stimulus Port Register 137Provides the interface for generating Instrumentation packetsSection 2.7.9.138
228hITM Stimulus Port Register 138Provides the interface for generating Instrumentation packetsSection 2.7.9.139
22ChITM Stimulus Port Register 139Provides the interface for generating Instrumentation packetsSection 2.7.9.140
230hITM Stimulus Port Register 140Provides the interface for generating Instrumentation packetsSection 2.7.9.141
234hITM Stimulus Port Register 141Provides the interface for generating Instrumentation packetsSection 2.7.9.142
238hITM Stimulus Port Register 142Provides the interface for generating Instrumentation packetsSection 2.7.9.143
23ChITM Stimulus Port Register 143Provides the interface for generating Instrumentation packetsSection 2.7.9.144
240hITM Stimulus Port Register 144Provides the interface for generating Instrumentation packetsSection 2.7.9.145
244hITM Stimulus Port Register 145Provides the interface for generating Instrumentation packetsSection 2.7.9.146
248hITM Stimulus Port Register 146Provides the interface for generating Instrumentation packetsSection 2.7.9.147
24ChITM Stimulus Port Register 147Provides the interface for generating Instrumentation packetsSection 2.7.9.148
250hITM Stimulus Port Register 148Provides the interface for generating Instrumentation packetsSection 2.7.9.149
254hITM Stimulus Port Register 149Provides the interface for generating Instrumentation packetsSection 2.7.9.150
258hITM Stimulus Port Register 150Provides the interface for generating Instrumentation packetsSection 2.7.9.151
25ChITM Stimulus Port Register 151Provides the interface for generating Instrumentation packetsSection 2.7.9.152
260hITM Stimulus Port Register 152Provides the interface for generating Instrumentation packetsSection 2.7.9.153
264hITM Stimulus Port Register 153Provides the interface for generating Instrumentation packetsSection 2.7.9.154
268hITM Stimulus Port Register 154Provides the interface for generating Instrumentation packetsSection 2.7.9.155
26ChITM Stimulus Port Register 155Provides the interface for generating Instrumentation packetsSection 2.7.9.156
270hITM Stimulus Port Register 156Provides the interface for generating Instrumentation packetsSection 2.7.9.157
274hITM Stimulus Port Register 157Provides the interface for generating Instrumentation packetsSection 2.7.9.158
278hITM Stimulus Port Register 158Provides the interface for generating Instrumentation packetsSection 2.7.9.159
27ChITM Stimulus Port Register 159Provides the interface for generating Instrumentation packetsSection 2.7.9.160
280hITM Stimulus Port Register 160Provides the interface for generating Instrumentation packetsSection 2.7.9.161
284hITM Stimulus Port Register 161Provides the interface for generating Instrumentation packetsSection 2.7.9.162
288hITM Stimulus Port Register 162Provides the interface for generating Instrumentation packetsSection 2.7.9.163
28ChITM Stimulus Port Register 163Provides the interface for generating Instrumentation packetsSection 2.7.9.164
290hITM Stimulus Port Register 164Provides the interface for generating Instrumentation packetsSection 2.7.9.165
294hITM Stimulus Port Register 165Provides the interface for generating Instrumentation packetsSection 2.7.9.166
298hITM Stimulus Port Register 166Provides the interface for generating Instrumentation packetsSection 2.7.9.167
29ChITM Stimulus Port Register 167Provides the interface for generating Instrumentation packetsSection 2.7.9.168
2A0hITM Stimulus Port Register 168Provides the interface for generating Instrumentation packetsSection 2.7.9.169
2A4hITM Stimulus Port Register 169Provides the interface for generating Instrumentation packetsSection 2.7.9.170
2A8hITM Stimulus Port Register 170Provides the interface for generating Instrumentation packetsSection 2.7.9.171
2AChITM Stimulus Port Register 171Provides the interface for generating Instrumentation packetsSection 2.7.9.172
2B0hITM Stimulus Port Register 172Provides the interface for generating Instrumentation packetsSection 2.7.9.173
2B4hITM Stimulus Port Register 173Provides the interface for generating Instrumentation packetsSection 2.7.9.174
2B8hITM Stimulus Port Register 174Provides the interface for generating Instrumentation packetsSection 2.7.9.175
2BChITM Stimulus Port Register 175Provides the interface for generating Instrumentation packetsSection 2.7.9.176
2C0hITM Stimulus Port Register 176Provides the interface for generating Instrumentation packetsSection 2.7.9.177
2C4hITM Stimulus Port Register 177Provides the interface for generating Instrumentation packetsSection 2.7.9.178
2C8hITM Stimulus Port Register 178Provides the interface for generating Instrumentation packetsSection 2.7.9.179
2CChITM Stimulus Port Register 179Provides the interface for generating Instrumentation packetsSection 2.7.9.180
2D0hITM Stimulus Port Register 180Provides the interface for generating Instrumentation packetsSection 2.7.9.181
2D4hITM Stimulus Port Register 181Provides the interface for generating Instrumentation packetsSection 2.7.9.182
2D8hITM Stimulus Port Register 182Provides the interface for generating Instrumentation packetsSection 2.7.9.183
2DChITM Stimulus Port Register 183Provides the interface for generating Instrumentation packetsSection 2.7.9.184
2E0hITM Stimulus Port Register 184Provides the interface for generating Instrumentation packetsSection 2.7.9.185
2E4hITM Stimulus Port Register 185Provides the interface for generating Instrumentation packetsSection 2.7.9.186
2E8hITM Stimulus Port Register 186Provides the interface for generating Instrumentation packetsSection 2.7.9.187
2EChITM Stimulus Port Register 187Provides the interface for generating Instrumentation packetsSection 2.7.9.188
2F0hITM Stimulus Port Register 188Provides the interface for generating Instrumentation packetsSection 2.7.9.189
2F4hITM Stimulus Port Register 189Provides the interface for generating Instrumentation packetsSection 2.7.9.190
2F8hITM Stimulus Port Register 190Provides the interface for generating Instrumentation packetsSection 2.7.9.191
2FChITM Stimulus Port Register 191Provides the interface for generating Instrumentation packetsSection 2.7.9.192
300hITM Stimulus Port Register 192Provides the interface for generating Instrumentation packetsSection 2.7.9.193
304hITM Stimulus Port Register 193Provides the interface for generating Instrumentation packetsSection 2.7.9.194
308hITM Stimulus Port Register 194Provides the interface for generating Instrumentation packetsSection 2.7.9.195
30ChITM Stimulus Port Register 195Provides the interface for generating Instrumentation packetsSection 2.7.9.196
310hITM Stimulus Port Register 196Provides the interface for generating Instrumentation packetsSection 2.7.9.197
314hITM Stimulus Port Register 197Provides the interface for generating Instrumentation packetsSection 2.7.9.198
318hITM Stimulus Port Register 198Provides the interface for generating Instrumentation packetsSection 2.7.9.199
31ChITM Stimulus Port Register 199Provides the interface for generating Instrumentation packetsSection 2.7.9.200
320hITM Stimulus Port Register 200Provides the interface for generating Instrumentation packetsSection 2.7.9.201
324hITM Stimulus Port Register 201Provides the interface for generating Instrumentation packetsSection 2.7.9.202
328hITM Stimulus Port Register 202Provides the interface for generating Instrumentation packetsSection 2.7.9.203
32ChITM Stimulus Port Register 203Provides the interface for generating Instrumentation packetsSection 2.7.9.204
330hITM Stimulus Port Register 204Provides the interface for generating Instrumentation packetsSection 2.7.9.205
334hITM Stimulus Port Register 205Provides the interface for generating Instrumentation packetsSection 2.7.9.206
338hITM Stimulus Port Register 206Provides the interface for generating Instrumentation packetsSection 2.7.9.207
33ChITM Stimulus Port Register 207Provides the interface for generating Instrumentation packetsSection 2.7.9.208
340hITM Stimulus Port Register 208Provides the interface for generating Instrumentation packetsSection 2.7.9.209
344hITM Stimulus Port Register 209Provides the interface for generating Instrumentation packetsSection 2.7.9.210
348hITM Stimulus Port Register 210Provides the interface for generating Instrumentation packetsSection 2.7.9.211
34ChITM Stimulus Port Register 211Provides the interface for generating Instrumentation packetsSection 2.7.9.212
350hITM Stimulus Port Register 212Provides the interface for generating Instrumentation packetsSection 2.7.9.213
354hITM Stimulus Port Register 213Provides the interface for generating Instrumentation packetsSection 2.7.9.214
358hITM Stimulus Port Register 214Provides the interface for generating Instrumentation packetsSection 2.7.9.215
35ChITM Stimulus Port Register 215Provides the interface for generating Instrumentation packetsSection 2.7.9.216
360hITM Stimulus Port Register 216Provides the interface for generating Instrumentation packetsSection 2.7.9.217
364hITM Stimulus Port Register 217Provides the interface for generating Instrumentation packetsSection 2.7.9.218
368hITM Stimulus Port Register 218Provides the interface for generating Instrumentation packetsSection 2.7.9.219
36ChITM Stimulus Port Register 219Provides the interface for generating Instrumentation packetsSection 2.7.9.220
370hITM Stimulus Port Register 220Provides the interface for generating Instrumentation packetsSection 2.7.9.221
374hITM Stimulus Port Register 221Provides the interface for generating Instrumentation packetsSection 2.7.9.222
378hITM Stimulus Port Register 222Provides the interface for generating Instrumentation packetsSection 2.7.9.223
37ChITM Stimulus Port Register 223Provides the interface for generating Instrumentation packetsSection 2.7.9.224
380hITM Stimulus Port Register 224Provides the interface for generating Instrumentation packetsSection 2.7.9.225
384hITM Stimulus Port Register 225Provides the interface for generating Instrumentation packetsSection 2.7.9.226
388hITM Stimulus Port Register 226Provides the interface for generating Instrumentation packetsSection 2.7.9.227
38ChITM Stimulus Port Register 227Provides the interface for generating Instrumentation packetsSection 2.7.9.228
390hITM Stimulus Port Register 228Provides the interface for generating Instrumentation packetsSection 2.7.9.229
394hITM Stimulus Port Register 229Provides the interface for generating Instrumentation packetsSection 2.7.9.230
398hITM Stimulus Port Register 230Provides the interface for generating Instrumentation packetsSection 2.7.9.231
39ChITM Stimulus Port Register 231Provides the interface for generating Instrumentation packetsSection 2.7.9.232
3A0hITM Stimulus Port Register 232Provides the interface for generating Instrumentation packetsSection 2.7.9.233
3A4hITM Stimulus Port Register 233Provides the interface for generating Instrumentation packetsSection 2.7.9.234
3A8hITM Stimulus Port Register 234Provides the interface for generating Instrumentation packetsSection 2.7.9.235
3AChITM Stimulus Port Register 235Provides the interface for generating Instrumentation packetsSection 2.7.9.236
3B0hITM Stimulus Port Register 236Provides the interface for generating Instrumentation packetsSection 2.7.9.237
3B4hITM Stimulus Port Register 237Provides the interface for generating Instrumentation packetsSection 2.7.9.238
3B8hITM Stimulus Port Register 238Provides the interface for generating Instrumentation packetsSection 2.7.9.239
3BChITM Stimulus Port Register 239Provides the interface for generating Instrumentation packetsSection 2.7.9.240
3C0hITM Stimulus Port Register 240Provides the interface for generating Instrumentation packetsSection 2.7.9.241
3C4hITM Stimulus Port Register 241Provides the interface for generating Instrumentation packetsSection 2.7.9.242
3C8hITM Stimulus Port Register 242Provides the interface for generating Instrumentation packetsSection 2.7.9.243
3CChITM Stimulus Port Register 243Provides the interface for generating Instrumentation packetsSection 2.7.9.244
3D0hITM Stimulus Port Register 244Provides the interface for generating Instrumentation packetsSection 2.7.9.245
3D4hITM Stimulus Port Register 245Provides the interface for generating Instrumentation packetsSection 2.7.9.246
3D8hITM Stimulus Port Register 246Provides the interface for generating Instrumentation packetsSection 2.7.9.247
3DChITM Stimulus Port Register 247Provides the interface for generating Instrumentation packetsSection 2.7.9.248
3E0hITM Stimulus Port Register 248Provides the interface for generating Instrumentation packetsSection 2.7.9.249
3E4hITM Stimulus Port Register 249Provides the interface for generating Instrumentation packetsSection 2.7.9.250
3E8hITM Stimulus Port Register 250Provides the interface for generating Instrumentation packetsSection 2.7.9.251
3EChITM Stimulus Port Register 251Provides the interface for generating Instrumentation packetsSection 2.7.9.252
3F0hITM Stimulus Port Register 252Provides the interface for generating Instrumentation packetsSection 2.7.9.253
3F4hITM Stimulus Port Register 253Provides the interface for generating Instrumentation packetsSection 2.7.9.254
3F8hITM Stimulus Port Register 254Provides the interface for generating Instrumentation packetsSection 2.7.9.255
3FChITM Stimulus Port Register 255Provides the interface for generating Instrumentation packetsSection 2.7.9.256
E00hITM Trace Enable Register 0Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.257
E04hITM Trace Enable Register 1Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.258
E08hITM Trace Enable Register 2Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.259
E0ChITM Trace Enable Register 3Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.260
E10hITM Trace Enable Register 4Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.261
E14hITM Trace Enable Register 5Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.262
E18hITM Trace Enable Register 6Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.263
E1ChITM Trace Enable Register 7Provide an individual enable bit for each ITM_STIM registerSection 2.7.9.264
E40hITM Trace Privilege RegisterControls which stimulus ports can be accessed by unprivileged codeSection 2.7.9.265
E80hITM Trace Control RegisterConfigures and controls transfers through the ITM interfaceSection 2.7.9.266
EF0hINT_ATREADYIntegration Mode: Read ATB ReadySection 2.7.9.267
EF8hINT_ATVALIDIntegration Mode: Write ATB ValidSection 2.7.9.268
F00hITM_ITCTRLIntegration Mode Control RegisterSection 2.7.9.269
FBChITM Device Architecture RegisterProvides CoreSight discovery information for the ITMSection 2.7.9.270
FCChITM Device Type RegisterProvides CoreSight discovery information for the ITMSection 2.7.9.271
FD0hITM Peripheral Identification Register 4Provides CoreSight discovery information for the ITMSection 2.7.9.272
FD4hITM Peripheral Identification Register 5Provides CoreSight discovery information for the ITMSection 2.7.9.273
FD8hITM Peripheral Identification Register 6Provides CoreSight discovery information for the ITMSection 2.7.9.274
FDChITM Peripheral Identification Register 7Provides CoreSight discovery information for the ITMSection 2.7.9.275
FE0hITM Peripheral Identification Register 0Provides CoreSight discovery information for the ITMSection 2.7.9.276
FE4hITM Peripheral Identification Register 1Provides CoreSight discovery information for the ITMSection 2.7.9.277
FE8hITM Peripheral Identification Register 2Provides CoreSight discovery information for the ITMSection 2.7.9.278
FEChITM Peripheral Identification Register 3Provides CoreSight discovery information for the ITMSection 2.7.9.279
FF0hITM Component Identification Register 0Provides CoreSight discovery information for the ITMSection 2.7.9.280
FF4hITM Component Identification Register 1Provides CoreSight discovery information for the ITMSection 2.7.9.281
FF8hITM Component Identification Register 2Provides CoreSight discovery information for the ITMSection 2.7.9.282
FFChITM Component Identification Register 3Provides CoreSight discovery information for the ITMSection 2.7.9.283

Complex bit access types are encoded to fit into small table cells. Table 2-148 shows the codes that are used for access types in this section.

Table 2-148 ITM Access Type Codes
Access TypeCodeDescription
Read Type
RRRead
Write Type
WWWrite
Reset or Default Value
-nValue after reset or the default value

2.7.9.1 ITM Stimulus Port Register 0 (Offset = 0h) [Reset = 00000002h]

ITM Stimulus Port Register 0 is shown in Table 2-149.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-149 ITM Stimulus Port Register 0 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.2 ITM Stimulus Port Register 1 (Offset = 4h) [Reset = 00000002h]

ITM Stimulus Port Register 1 is shown in Table 2-150.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-150 ITM Stimulus Port Register 1 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.3 ITM Stimulus Port Register 2 (Offset = 8h) [Reset = 00000002h]

ITM Stimulus Port Register 2 is shown in Table 2-151.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-151 ITM Stimulus Port Register 2 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.4 ITM Stimulus Port Register 3 (Offset = Ch) [Reset = 00000002h]

ITM Stimulus Port Register 3 is shown in Table 2-152.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-152 ITM Stimulus Port Register 3 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.5 ITM Stimulus Port Register 4 (Offset = 10h) [Reset = 00000002h]

ITM Stimulus Port Register 4 is shown in Table 2-153.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-153 ITM Stimulus Port Register 4 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.6 ITM Stimulus Port Register 5 (Offset = 14h) [Reset = 00000002h]

ITM Stimulus Port Register 5 is shown in Table 2-154.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-154 ITM Stimulus Port Register 5 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.7 ITM Stimulus Port Register 6 (Offset = 18h) [Reset = 00000002h]

ITM Stimulus Port Register 6 is shown in Table 2-155.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-155 ITM Stimulus Port Register 6 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.8 ITM Stimulus Port Register 7 (Offset = 1Ch) [Reset = 00000002h]

ITM Stimulus Port Register 7 is shown in Table 2-156.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-156 ITM Stimulus Port Register 7 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.9 ITM Stimulus Port Register 8 (Offset = 20h) [Reset = 00000002h]

ITM Stimulus Port Register 8 is shown in Table 2-157.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-157 ITM Stimulus Port Register 8 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.10 ITM Stimulus Port Register 9 (Offset = 24h) [Reset = 00000002h]

ITM Stimulus Port Register 9 is shown in Table 2-158.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-158 ITM Stimulus Port Register 9 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.11 ITM Stimulus Port Register 10 (Offset = 28h) [Reset = 00000002h]

ITM Stimulus Port Register 10 is shown in Table 2-159.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-159 ITM Stimulus Port Register 10 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.12 ITM Stimulus Port Register 11 (Offset = 2Ch) [Reset = 00000002h]

ITM Stimulus Port Register 11 is shown in Table 2-160.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-160 ITM Stimulus Port Register 11 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.13 ITM Stimulus Port Register 12 (Offset = 30h) [Reset = 00000002h]

ITM Stimulus Port Register 12 is shown in Table 2-161.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-161 ITM Stimulus Port Register 12 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.14 ITM Stimulus Port Register 13 (Offset = 34h) [Reset = 00000002h]

ITM Stimulus Port Register 13 is shown in Table 2-162.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-162 ITM Stimulus Port Register 13 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.15 ITM Stimulus Port Register 14 (Offset = 38h) [Reset = 00000002h]

ITM Stimulus Port Register 14 is shown in Table 2-163.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-163 ITM Stimulus Port Register 14 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.16 ITM Stimulus Port Register 15 (Offset = 3Ch) [Reset = 00000002h]

ITM Stimulus Port Register 15 is shown in Table 2-164.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-164 ITM Stimulus Port Register 15 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.17 ITM Stimulus Port Register 16 (Offset = 40h) [Reset = 00000002h]

ITM Stimulus Port Register 16 is shown in Table 2-165.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-165 ITM Stimulus Port Register 16 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.18 ITM Stimulus Port Register 17 (Offset = 44h) [Reset = 00000002h]

ITM Stimulus Port Register 17 is shown in Table 2-166.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-166 ITM Stimulus Port Register 17 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.19 ITM Stimulus Port Register 18 (Offset = 48h) [Reset = 00000002h]

ITM Stimulus Port Register 18 is shown in Table 2-167.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-167 ITM Stimulus Port Register 18 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.20 ITM Stimulus Port Register 19 (Offset = 4Ch) [Reset = 00000002h]

ITM Stimulus Port Register 19 is shown in Table 2-168.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-168 ITM Stimulus Port Register 19 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.21 ITM Stimulus Port Register 20 (Offset = 50h) [Reset = 00000002h]

ITM Stimulus Port Register 20 is shown in Table 2-169.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-169 ITM Stimulus Port Register 20 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.22 ITM Stimulus Port Register 21 (Offset = 54h) [Reset = 00000002h]

ITM Stimulus Port Register 21 is shown in Table 2-170.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-170 ITM Stimulus Port Register 21 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.23 ITM Stimulus Port Register 22 (Offset = 58h) [Reset = 00000002h]

ITM Stimulus Port Register 22 is shown in Table 2-171.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-171 ITM Stimulus Port Register 22 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.24 ITM Stimulus Port Register 23 (Offset = 5Ch) [Reset = 00000002h]

ITM Stimulus Port Register 23 is shown in Table 2-172.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-172 ITM Stimulus Port Register 23 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.25 ITM Stimulus Port Register 24 (Offset = 60h) [Reset = 00000002h]

ITM Stimulus Port Register 24 is shown in Table 2-173.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-173 ITM Stimulus Port Register 24 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.26 ITM Stimulus Port Register 25 (Offset = 64h) [Reset = 00000002h]

ITM Stimulus Port Register 25 is shown in Table 2-174.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-174 ITM Stimulus Port Register 25 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.27 ITM Stimulus Port Register 26 (Offset = 68h) [Reset = 00000002h]

ITM Stimulus Port Register 26 is shown in Table 2-175.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-175 ITM Stimulus Port Register 26 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.28 ITM Stimulus Port Register 27 (Offset = 6Ch) [Reset = 00000002h]

ITM Stimulus Port Register 27 is shown in Table 2-176.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-176 ITM Stimulus Port Register 27 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.29 ITM Stimulus Port Register 28 (Offset = 70h) [Reset = 00000002h]

ITM Stimulus Port Register 28 is shown in Table 2-177.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-177 ITM Stimulus Port Register 28 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.30 ITM Stimulus Port Register 29 (Offset = 74h) [Reset = 00000002h]

ITM Stimulus Port Register 29 is shown in Table 2-178.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-178 ITM Stimulus Port Register 29 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.31 ITM Stimulus Port Register 30 (Offset = 78h) [Reset = 00000002h]

ITM Stimulus Port Register 30 is shown in Table 2-179.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-179 ITM Stimulus Port Register 30 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.32 ITM Stimulus Port Register 31 (Offset = 7Ch) [Reset = 00000002h]

ITM Stimulus Port Register 31 is shown in Table 2-180.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-180 ITM Stimulus Port Register 31 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR1hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW2hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.33 ITM Stimulus Port Register 32 (Offset = 80h) [Reset = 00000000h]

ITM Stimulus Port Register 32 is shown in Table 2-181.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-181 ITM Stimulus Port Register 32 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.34 ITM Stimulus Port Register 33 (Offset = 84h) [Reset = 00000000h]

ITM Stimulus Port Register 33 is shown in Table 2-182.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-182 ITM Stimulus Port Register 33 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.35 ITM Stimulus Port Register 34 (Offset = 88h) [Reset = 00000000h]

ITM Stimulus Port Register 34 is shown in Table 2-183.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-183 ITM Stimulus Port Register 34 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.36 ITM Stimulus Port Register 35 (Offset = 8Ch) [Reset = 00000000h]

ITM Stimulus Port Register 35 is shown in Table 2-184.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-184 ITM Stimulus Port Register 35 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.37 ITM Stimulus Port Register 36 (Offset = 90h) [Reset = 00000000h]

ITM Stimulus Port Register 36 is shown in Table 2-185.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-185 ITM Stimulus Port Register 36 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.38 ITM Stimulus Port Register 37 (Offset = 94h) [Reset = 00000000h]

ITM Stimulus Port Register 37 is shown in Table 2-186.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-186 ITM Stimulus Port Register 37 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.39 ITM Stimulus Port Register 38 (Offset = 98h) [Reset = 00000000h]

ITM Stimulus Port Register 38 is shown in Table 2-187.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-187 ITM Stimulus Port Register 38 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.40 ITM Stimulus Port Register 39 (Offset = 9Ch) [Reset = 00000000h]

ITM Stimulus Port Register 39 is shown in Table 2-188.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-188 ITM Stimulus Port Register 39 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.41 ITM Stimulus Port Register 40 (Offset = A0h) [Reset = 00000000h]

ITM Stimulus Port Register 40 is shown in Table 2-189.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-189 ITM Stimulus Port Register 40 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.42 ITM Stimulus Port Register 41 (Offset = A4h) [Reset = 00000000h]

ITM Stimulus Port Register 41 is shown in Table 2-190.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-190 ITM Stimulus Port Register 41 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.43 ITM Stimulus Port Register 42 (Offset = A8h) [Reset = 00000000h]

ITM Stimulus Port Register 42 is shown in Table 2-191.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-191 ITM Stimulus Port Register 42 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.44 ITM Stimulus Port Register 43 (Offset = ACh) [Reset = 00000000h]

ITM Stimulus Port Register 43 is shown in Table 2-192.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-192 ITM Stimulus Port Register 43 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.45 ITM Stimulus Port Register 44 (Offset = B0h) [Reset = 00000000h]

ITM Stimulus Port Register 44 is shown in Table 2-193.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-193 ITM Stimulus Port Register 44 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.46 ITM Stimulus Port Register 45 (Offset = B4h) [Reset = 00000000h]

ITM Stimulus Port Register 45 is shown in Table 2-194.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-194 ITM Stimulus Port Register 45 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.47 ITM Stimulus Port Register 46 (Offset = B8h) [Reset = 00000000h]

ITM Stimulus Port Register 46 is shown in Table 2-195.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-195 ITM Stimulus Port Register 46 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.48 ITM Stimulus Port Register 47 (Offset = BCh) [Reset = 00000000h]

ITM Stimulus Port Register 47 is shown in Table 2-196.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-196 ITM Stimulus Port Register 47 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.49 ITM Stimulus Port Register 48 (Offset = C0h) [Reset = 00000000h]

ITM Stimulus Port Register 48 is shown in Table 2-197.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-197 ITM Stimulus Port Register 48 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.50 ITM Stimulus Port Register 49 (Offset = C4h) [Reset = 00000000h]

ITM Stimulus Port Register 49 is shown in Table 2-198.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-198 ITM Stimulus Port Register 49 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.51 ITM Stimulus Port Register 50 (Offset = C8h) [Reset = 00000000h]

ITM Stimulus Port Register 50 is shown in Table 2-199.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-199 ITM Stimulus Port Register 50 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.52 ITM Stimulus Port Register 51 (Offset = CCh) [Reset = 00000000h]

ITM Stimulus Port Register 51 is shown in Table 2-200.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-200 ITM Stimulus Port Register 51 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.53 ITM Stimulus Port Register 52 (Offset = D0h) [Reset = 00000000h]

ITM Stimulus Port Register 52 is shown in Table 2-201.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-201 ITM Stimulus Port Register 52 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.54 ITM Stimulus Port Register 53 (Offset = D4h) [Reset = 00000000h]

ITM Stimulus Port Register 53 is shown in Table 2-202.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-202 ITM Stimulus Port Register 53 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.55 ITM Stimulus Port Register 54 (Offset = D8h) [Reset = 00000000h]

ITM Stimulus Port Register 54 is shown in Table 2-203.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-203 ITM Stimulus Port Register 54 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.56 ITM Stimulus Port Register 55 (Offset = DCh) [Reset = 00000000h]

ITM Stimulus Port Register 55 is shown in Table 2-204.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-204 ITM Stimulus Port Register 55 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.57 ITM Stimulus Port Register 56 (Offset = E0h) [Reset = 00000000h]

ITM Stimulus Port Register 56 is shown in Table 2-205.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-205 ITM Stimulus Port Register 56 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.58 ITM Stimulus Port Register 57 (Offset = E4h) [Reset = 00000000h]

ITM Stimulus Port Register 57 is shown in Table 2-206.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-206 ITM Stimulus Port Register 57 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.59 ITM Stimulus Port Register 58 (Offset = E8h) [Reset = 00000000h]

ITM Stimulus Port Register 58 is shown in Table 2-207.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-207 ITM Stimulus Port Register 58 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.60 ITM Stimulus Port Register 59 (Offset = ECh) [Reset = 00000000h]

ITM Stimulus Port Register 59 is shown in Table 2-208.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-208 ITM Stimulus Port Register 59 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.61 ITM Stimulus Port Register 60 (Offset = F0h) [Reset = 00000000h]

ITM Stimulus Port Register 60 is shown in Table 2-209.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-209 ITM Stimulus Port Register 60 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.62 ITM Stimulus Port Register 61 (Offset = F4h) [Reset = 00000000h]

ITM Stimulus Port Register 61 is shown in Table 2-210.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-210 ITM Stimulus Port Register 61 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.63 ITM Stimulus Port Register 62 (Offset = F8h) [Reset = 00000000h]

ITM Stimulus Port Register 62 is shown in Table 2-211.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-211 ITM Stimulus Port Register 62 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.64 ITM Stimulus Port Register 63 (Offset = FCh) [Reset = 00000000h]

ITM Stimulus Port Register 63 is shown in Table 2-212.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-212 ITM Stimulus Port Register 63 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.65 ITM Stimulus Port Register 64 (Offset = 100h) [Reset = 00000000h]

ITM Stimulus Port Register 64 is shown in Table 2-213.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-213 ITM Stimulus Port Register 64 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.66 ITM Stimulus Port Register 65 (Offset = 104h) [Reset = 00000000h]

ITM Stimulus Port Register 65 is shown in Table 2-214.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-214 ITM Stimulus Port Register 65 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.67 ITM Stimulus Port Register 66 (Offset = 108h) [Reset = 00000000h]

ITM Stimulus Port Register 66 is shown in Table 2-215.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-215 ITM Stimulus Port Register 66 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.68 ITM Stimulus Port Register 67 (Offset = 10Ch) [Reset = 00000000h]

ITM Stimulus Port Register 67 is shown in Table 2-216.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-216 ITM Stimulus Port Register 67 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.69 ITM Stimulus Port Register 68 (Offset = 110h) [Reset = 00000000h]

ITM Stimulus Port Register 68 is shown in Table 2-217.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-217 ITM Stimulus Port Register 68 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.70 ITM Stimulus Port Register 69 (Offset = 114h) [Reset = 00000000h]

ITM Stimulus Port Register 69 is shown in Table 2-218.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-218 ITM Stimulus Port Register 69 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.71 ITM Stimulus Port Register 70 (Offset = 118h) [Reset = 00000000h]

ITM Stimulus Port Register 70 is shown in Table 2-219.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-219 ITM Stimulus Port Register 70 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.72 ITM Stimulus Port Register 71 (Offset = 11Ch) [Reset = 00000000h]

ITM Stimulus Port Register 71 is shown in Table 2-220.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-220 ITM Stimulus Port Register 71 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.73 ITM Stimulus Port Register 72 (Offset = 120h) [Reset = 00000000h]

ITM Stimulus Port Register 72 is shown in Table 2-221.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-221 ITM Stimulus Port Register 72 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.74 ITM Stimulus Port Register 73 (Offset = 124h) [Reset = 00000000h]

ITM Stimulus Port Register 73 is shown in Table 2-222.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-222 ITM Stimulus Port Register 73 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.75 ITM Stimulus Port Register 74 (Offset = 128h) [Reset = 00000000h]

ITM Stimulus Port Register 74 is shown in Table 2-223.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-223 ITM Stimulus Port Register 74 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.76 ITM Stimulus Port Register 75 (Offset = 12Ch) [Reset = 00000000h]

ITM Stimulus Port Register 75 is shown in Table 2-224.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-224 ITM Stimulus Port Register 75 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.77 ITM Stimulus Port Register 76 (Offset = 130h) [Reset = 00000000h]

ITM Stimulus Port Register 76 is shown in Table 2-225.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-225 ITM Stimulus Port Register 76 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.78 ITM Stimulus Port Register 77 (Offset = 134h) [Reset = 00000000h]

ITM Stimulus Port Register 77 is shown in Table 2-226.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-226 ITM Stimulus Port Register 77 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.79 ITM Stimulus Port Register 78 (Offset = 138h) [Reset = 00000000h]

ITM Stimulus Port Register 78 is shown in Table 2-227.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-227 ITM Stimulus Port Register 78 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.80 ITM Stimulus Port Register 79 (Offset = 13Ch) [Reset = 00000000h]

ITM Stimulus Port Register 79 is shown in Table 2-228.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-228 ITM Stimulus Port Register 79 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.81 ITM Stimulus Port Register 80 (Offset = 140h) [Reset = 00000000h]

ITM Stimulus Port Register 80 is shown in Table 2-229.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-229 ITM Stimulus Port Register 80 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.82 ITM Stimulus Port Register 81 (Offset = 144h) [Reset = 00000000h]

ITM Stimulus Port Register 81 is shown in Table 2-230.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-230 ITM Stimulus Port Register 81 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.83 ITM Stimulus Port Register 82 (Offset = 148h) [Reset = 00000000h]

ITM Stimulus Port Register 82 is shown in Table 2-231.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-231 ITM Stimulus Port Register 82 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.84 ITM Stimulus Port Register 83 (Offset = 14Ch) [Reset = 00000000h]

ITM Stimulus Port Register 83 is shown in Table 2-232.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-232 ITM Stimulus Port Register 83 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.85 ITM Stimulus Port Register 84 (Offset = 150h) [Reset = 00000000h]

ITM Stimulus Port Register 84 is shown in Table 2-233.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-233 ITM Stimulus Port Register 84 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.86 ITM Stimulus Port Register 85 (Offset = 154h) [Reset = 00000000h]

ITM Stimulus Port Register 85 is shown in Table 2-234.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-234 ITM Stimulus Port Register 85 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.87 ITM Stimulus Port Register 86 (Offset = 158h) [Reset = 00000000h]

ITM Stimulus Port Register 86 is shown in Table 2-235.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-235 ITM Stimulus Port Register 86 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.88 ITM Stimulus Port Register 87 (Offset = 15Ch) [Reset = 00000000h]

ITM Stimulus Port Register 87 is shown in Table 2-236.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-236 ITM Stimulus Port Register 87 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.89 ITM Stimulus Port Register 88 (Offset = 160h) [Reset = 00000000h]

ITM Stimulus Port Register 88 is shown in Table 2-237.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-237 ITM Stimulus Port Register 88 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.90 ITM Stimulus Port Register 89 (Offset = 164h) [Reset = 00000000h]

ITM Stimulus Port Register 89 is shown in Table 2-238.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-238 ITM Stimulus Port Register 89 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.91 ITM Stimulus Port Register 90 (Offset = 168h) [Reset = 00000000h]

ITM Stimulus Port Register 90 is shown in Table 2-239.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-239 ITM Stimulus Port Register 90 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.92 ITM Stimulus Port Register 91 (Offset = 16Ch) [Reset = 00000000h]

ITM Stimulus Port Register 91 is shown in Table 2-240.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-240 ITM Stimulus Port Register 91 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.93 ITM Stimulus Port Register 92 (Offset = 170h) [Reset = 00000000h]

ITM Stimulus Port Register 92 is shown in Table 2-241.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-241 ITM Stimulus Port Register 92 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.94 ITM Stimulus Port Register 93 (Offset = 174h) [Reset = 00000000h]

ITM Stimulus Port Register 93 is shown in Table 2-242.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-242 ITM Stimulus Port Register 93 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.95 ITM Stimulus Port Register 94 (Offset = 178h) [Reset = 00000000h]

ITM Stimulus Port Register 94 is shown in Table 2-243.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-243 ITM Stimulus Port Register 94 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.96 ITM Stimulus Port Register 95 (Offset = 17Ch) [Reset = 00000000h]

ITM Stimulus Port Register 95 is shown in Table 2-244.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-244 ITM Stimulus Port Register 95 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.97 ITM Stimulus Port Register 96 (Offset = 180h) [Reset = 00000000h]

ITM Stimulus Port Register 96 is shown in Table 2-245.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-245 ITM Stimulus Port Register 96 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.98 ITM Stimulus Port Register 97 (Offset = 184h) [Reset = 00000000h]

ITM Stimulus Port Register 97 is shown in Table 2-246.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-246 ITM Stimulus Port Register 97 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.99 ITM Stimulus Port Register 98 (Offset = 188h) [Reset = 00000000h]

ITM Stimulus Port Register 98 is shown in Table 2-247.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-247 ITM Stimulus Port Register 98 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.100 ITM Stimulus Port Register 99 (Offset = 18Ch) [Reset = 00000000h]

ITM Stimulus Port Register 99 is shown in Table 2-248.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-248 ITM Stimulus Port Register 99 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.101 ITM Stimulus Port Register 100 (Offset = 190h) [Reset = 00000000h]

ITM Stimulus Port Register 100 is shown in Table 2-249.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-249 ITM Stimulus Port Register 100 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.102 ITM Stimulus Port Register 101 (Offset = 194h) [Reset = 00000000h]

ITM Stimulus Port Register 101 is shown in Table 2-250.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-250 ITM Stimulus Port Register 101 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.103 ITM Stimulus Port Register 102 (Offset = 198h) [Reset = 00000000h]

ITM Stimulus Port Register 102 is shown in Table 2-251.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-251 ITM Stimulus Port Register 102 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.104 ITM Stimulus Port Register 103 (Offset = 19Ch) [Reset = 00000000h]

ITM Stimulus Port Register 103 is shown in Table 2-252.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-252 ITM Stimulus Port Register 103 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.105 ITM Stimulus Port Register 104 (Offset = 1A0h) [Reset = 00000000h]

ITM Stimulus Port Register 104 is shown in Table 2-253.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-253 ITM Stimulus Port Register 104 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.106 ITM Stimulus Port Register 105 (Offset = 1A4h) [Reset = 00000000h]

ITM Stimulus Port Register 105 is shown in Table 2-254.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-254 ITM Stimulus Port Register 105 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.107 ITM Stimulus Port Register 106 (Offset = 1A8h) [Reset = 00000000h]

ITM Stimulus Port Register 106 is shown in Table 2-255.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-255 ITM Stimulus Port Register 106 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.108 ITM Stimulus Port Register 107 (Offset = 1ACh) [Reset = 00000000h]

ITM Stimulus Port Register 107 is shown in Table 2-256.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-256 ITM Stimulus Port Register 107 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.109 ITM Stimulus Port Register 108 (Offset = 1B0h) [Reset = 00000000h]

ITM Stimulus Port Register 108 is shown in Table 2-257.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-257 ITM Stimulus Port Register 108 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.110 ITM Stimulus Port Register 109 (Offset = 1B4h) [Reset = 00000000h]

ITM Stimulus Port Register 109 is shown in Table 2-258.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-258 ITM Stimulus Port Register 109 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.111 ITM Stimulus Port Register 110 (Offset = 1B8h) [Reset = 00000000h]

ITM Stimulus Port Register 110 is shown in Table 2-259.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-259 ITM Stimulus Port Register 110 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.112 ITM Stimulus Port Register 111 (Offset = 1BCh) [Reset = 00000000h]

ITM Stimulus Port Register 111 is shown in Table 2-260.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-260 ITM Stimulus Port Register 111 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.113 ITM Stimulus Port Register 112 (Offset = 1C0h) [Reset = 00000000h]

ITM Stimulus Port Register 112 is shown in Table 2-261.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-261 ITM Stimulus Port Register 112 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.114 ITM Stimulus Port Register 113 (Offset = 1C4h) [Reset = 00000000h]

ITM Stimulus Port Register 113 is shown in Table 2-262.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-262 ITM Stimulus Port Register 113 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.115 ITM Stimulus Port Register 114 (Offset = 1C8h) [Reset = 00000000h]

ITM Stimulus Port Register 114 is shown in Table 2-263.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-263 ITM Stimulus Port Register 114 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.116 ITM Stimulus Port Register 115 (Offset = 1CCh) [Reset = 00000000h]

ITM Stimulus Port Register 115 is shown in Table 2-264.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-264 ITM Stimulus Port Register 115 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.117 ITM Stimulus Port Register 116 (Offset = 1D0h) [Reset = 00000000h]

ITM Stimulus Port Register 116 is shown in Table 2-265.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-265 ITM Stimulus Port Register 116 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.118 ITM Stimulus Port Register 117 (Offset = 1D4h) [Reset = 00000000h]

ITM Stimulus Port Register 117 is shown in Table 2-266.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-266 ITM Stimulus Port Register 117 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.119 ITM Stimulus Port Register 118 (Offset = 1D8h) [Reset = 00000000h]

ITM Stimulus Port Register 118 is shown in Table 2-267.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-267 ITM Stimulus Port Register 118 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.120 ITM Stimulus Port Register 119 (Offset = 1DCh) [Reset = 00000000h]

ITM Stimulus Port Register 119 is shown in Table 2-268.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-268 ITM Stimulus Port Register 119 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.121 ITM Stimulus Port Register 120 (Offset = 1E0h) [Reset = 00000000h]

ITM Stimulus Port Register 120 is shown in Table 2-269.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-269 ITM Stimulus Port Register 120 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.122 ITM Stimulus Port Register 121 (Offset = 1E4h) [Reset = 00000000h]

ITM Stimulus Port Register 121 is shown in Table 2-270.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-270 ITM Stimulus Port Register 121 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.123 ITM Stimulus Port Register 122 (Offset = 1E8h) [Reset = 00000000h]

ITM Stimulus Port Register 122 is shown in Table 2-271.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-271 ITM Stimulus Port Register 122 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.124 ITM Stimulus Port Register 123 (Offset = 1ECh) [Reset = 00000000h]

ITM Stimulus Port Register 123 is shown in Table 2-272.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-272 ITM Stimulus Port Register 123 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.125 ITM Stimulus Port Register 124 (Offset = 1F0h) [Reset = 00000000h]

ITM Stimulus Port Register 124 is shown in Table 2-273.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-273 ITM Stimulus Port Register 124 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.126 ITM Stimulus Port Register 125 (Offset = 1F4h) [Reset = 00000000h]

ITM Stimulus Port Register 125 is shown in Table 2-274.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-274 ITM Stimulus Port Register 125 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.127 ITM Stimulus Port Register 126 (Offset = 1F8h) [Reset = 00000000h]

ITM Stimulus Port Register 126 is shown in Table 2-275.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-275 ITM Stimulus Port Register 126 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.128 ITM Stimulus Port Register 127 (Offset = 1FCh) [Reset = 00000000h]

ITM Stimulus Port Register 127 is shown in Table 2-276.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-276 ITM Stimulus Port Register 127 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.129 ITM Stimulus Port Register 128 (Offset = 200h) [Reset = 00000000h]

ITM Stimulus Port Register 128 is shown in Table 2-277.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-277 ITM Stimulus Port Register 128 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.130 ITM Stimulus Port Register 129 (Offset = 204h) [Reset = 00000000h]

ITM Stimulus Port Register 129 is shown in Table 2-278.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-278 ITM Stimulus Port Register 129 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.131 ITM Stimulus Port Register 130 (Offset = 208h) [Reset = 00000000h]

ITM Stimulus Port Register 130 is shown in Table 2-279.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-279 ITM Stimulus Port Register 130 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.132 ITM Stimulus Port Register 131 (Offset = 20Ch) [Reset = 00000000h]

ITM Stimulus Port Register 131 is shown in Table 2-280.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-280 ITM Stimulus Port Register 131 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.133 ITM Stimulus Port Register 132 (Offset = 210h) [Reset = 00000000h]

ITM Stimulus Port Register 132 is shown in Table 2-281.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-281 ITM Stimulus Port Register 132 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.134 ITM Stimulus Port Register 133 (Offset = 214h) [Reset = 00000000h]

ITM Stimulus Port Register 133 is shown in Table 2-282.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-282 ITM Stimulus Port Register 133 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.135 ITM Stimulus Port Register 134 (Offset = 218h) [Reset = 00000000h]

ITM Stimulus Port Register 134 is shown in Table 2-283.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-283 ITM Stimulus Port Register 134 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.136 ITM Stimulus Port Register 135 (Offset = 21Ch) [Reset = 00000000h]

ITM Stimulus Port Register 135 is shown in Table 2-284.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-284 ITM Stimulus Port Register 135 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.137 ITM Stimulus Port Register 136 (Offset = 220h) [Reset = 00000000h]

ITM Stimulus Port Register 136 is shown in Table 2-285.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-285 ITM Stimulus Port Register 136 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.138 ITM Stimulus Port Register 137 (Offset = 224h) [Reset = 00000000h]

ITM Stimulus Port Register 137 is shown in Table 2-286.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-286 ITM Stimulus Port Register 137 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.139 ITM Stimulus Port Register 138 (Offset = 228h) [Reset = 00000000h]

ITM Stimulus Port Register 138 is shown in Table 2-287.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-287 ITM Stimulus Port Register 138 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.140 ITM Stimulus Port Register 139 (Offset = 22Ch) [Reset = 00000000h]

ITM Stimulus Port Register 139 is shown in Table 2-288.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-288 ITM Stimulus Port Register 139 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.141 ITM Stimulus Port Register 140 (Offset = 230h) [Reset = 00000000h]

ITM Stimulus Port Register 140 is shown in Table 2-289.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-289 ITM Stimulus Port Register 140 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.142 ITM Stimulus Port Register 141 (Offset = 234h) [Reset = 00000000h]

ITM Stimulus Port Register 141 is shown in Table 2-290.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-290 ITM Stimulus Port Register 141 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.143 ITM Stimulus Port Register 142 (Offset = 238h) [Reset = 00000000h]

ITM Stimulus Port Register 142 is shown in Table 2-291.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-291 ITM Stimulus Port Register 142 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.144 ITM Stimulus Port Register 143 (Offset = 23Ch) [Reset = 00000000h]

ITM Stimulus Port Register 143 is shown in Table 2-292.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-292 ITM Stimulus Port Register 143 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.145 ITM Stimulus Port Register 144 (Offset = 240h) [Reset = 00000000h]

ITM Stimulus Port Register 144 is shown in Table 2-293.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-293 ITM Stimulus Port Register 144 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.146 ITM Stimulus Port Register 145 (Offset = 244h) [Reset = 00000000h]

ITM Stimulus Port Register 145 is shown in Table 2-294.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-294 ITM Stimulus Port Register 145 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.147 ITM Stimulus Port Register 146 (Offset = 248h) [Reset = 00000000h]

ITM Stimulus Port Register 146 is shown in Table 2-295.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-295 ITM Stimulus Port Register 146 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.148 ITM Stimulus Port Register 147 (Offset = 24Ch) [Reset = 00000000h]

ITM Stimulus Port Register 147 is shown in Table 2-296.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-296 ITM Stimulus Port Register 147 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.149 ITM Stimulus Port Register 148 (Offset = 250h) [Reset = 00000000h]

ITM Stimulus Port Register 148 is shown in Table 2-297.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-297 ITM Stimulus Port Register 148 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.150 ITM Stimulus Port Register 149 (Offset = 254h) [Reset = 00000000h]

ITM Stimulus Port Register 149 is shown in Table 2-298.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-298 ITM Stimulus Port Register 149 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.151 ITM Stimulus Port Register 150 (Offset = 258h) [Reset = 00000000h]

ITM Stimulus Port Register 150 is shown in Table 2-299.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-299 ITM Stimulus Port Register 150 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.152 ITM Stimulus Port Register 151 (Offset = 25Ch) [Reset = 00000000h]

ITM Stimulus Port Register 151 is shown in Table 2-300.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-300 ITM Stimulus Port Register 151 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.153 ITM Stimulus Port Register 152 (Offset = 260h) [Reset = 00000000h]

ITM Stimulus Port Register 152 is shown in Table 2-301.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-301 ITM Stimulus Port Register 152 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.154 ITM Stimulus Port Register 153 (Offset = 264h) [Reset = 00000000h]

ITM Stimulus Port Register 153 is shown in Table 2-302.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-302 ITM Stimulus Port Register 153 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.155 ITM Stimulus Port Register 154 (Offset = 268h) [Reset = 00000000h]

ITM Stimulus Port Register 154 is shown in Table 2-303.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-303 ITM Stimulus Port Register 154 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.156 ITM Stimulus Port Register 155 (Offset = 26Ch) [Reset = 00000000h]

ITM Stimulus Port Register 155 is shown in Table 2-304.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-304 ITM Stimulus Port Register 155 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.157 ITM Stimulus Port Register 156 (Offset = 270h) [Reset = 00000000h]

ITM Stimulus Port Register 156 is shown in Table 2-305.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-305 ITM Stimulus Port Register 156 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.158 ITM Stimulus Port Register 157 (Offset = 274h) [Reset = 00000000h]

ITM Stimulus Port Register 157 is shown in Table 2-306.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-306 ITM Stimulus Port Register 157 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.159 ITM Stimulus Port Register 158 (Offset = 278h) [Reset = 00000000h]

ITM Stimulus Port Register 158 is shown in Table 2-307.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-307 ITM Stimulus Port Register 158 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.160 ITM Stimulus Port Register 159 (Offset = 27Ch) [Reset = 00000000h]

ITM Stimulus Port Register 159 is shown in Table 2-308.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-308 ITM Stimulus Port Register 159 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.161 ITM Stimulus Port Register 160 (Offset = 280h) [Reset = 00000000h]

ITM Stimulus Port Register 160 is shown in Table 2-309.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-309 ITM Stimulus Port Register 160 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.162 ITM Stimulus Port Register 161 (Offset = 284h) [Reset = 00000000h]

ITM Stimulus Port Register 161 is shown in Table 2-310.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-310 ITM Stimulus Port Register 161 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.163 ITM Stimulus Port Register 162 (Offset = 288h) [Reset = 00000000h]

ITM Stimulus Port Register 162 is shown in Table 2-311.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-311 ITM Stimulus Port Register 162 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.164 ITM Stimulus Port Register 163 (Offset = 28Ch) [Reset = 00000000h]

ITM Stimulus Port Register 163 is shown in Table 2-312.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-312 ITM Stimulus Port Register 163 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.165 ITM Stimulus Port Register 164 (Offset = 290h) [Reset = 00000000h]

ITM Stimulus Port Register 164 is shown in Table 2-313.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-313 ITM Stimulus Port Register 164 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.166 ITM Stimulus Port Register 165 (Offset = 294h) [Reset = 00000000h]

ITM Stimulus Port Register 165 is shown in Table 2-314.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-314 ITM Stimulus Port Register 165 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.167 ITM Stimulus Port Register 166 (Offset = 298h) [Reset = 00000000h]

ITM Stimulus Port Register 166 is shown in Table 2-315.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-315 ITM Stimulus Port Register 166 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.168 ITM Stimulus Port Register 167 (Offset = 29Ch) [Reset = 00000000h]

ITM Stimulus Port Register 167 is shown in Table 2-316.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-316 ITM Stimulus Port Register 167 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.169 ITM Stimulus Port Register 168 (Offset = 2A0h) [Reset = 00000000h]

ITM Stimulus Port Register 168 is shown in Table 2-317.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-317 ITM Stimulus Port Register 168 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.170 ITM Stimulus Port Register 169 (Offset = 2A4h) [Reset = 00000000h]

ITM Stimulus Port Register 169 is shown in Table 2-318.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-318 ITM Stimulus Port Register 169 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.171 ITM Stimulus Port Register 170 (Offset = 2A8h) [Reset = 00000000h]

ITM Stimulus Port Register 170 is shown in Table 2-319.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-319 ITM Stimulus Port Register 170 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.172 ITM Stimulus Port Register 171 (Offset = 2ACh) [Reset = 00000000h]

ITM Stimulus Port Register 171 is shown in Table 2-320.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-320 ITM Stimulus Port Register 171 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.173 ITM Stimulus Port Register 172 (Offset = 2B0h) [Reset = 00000000h]

ITM Stimulus Port Register 172 is shown in Table 2-321.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-321 ITM Stimulus Port Register 172 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.174 ITM Stimulus Port Register 173 (Offset = 2B4h) [Reset = 00000000h]

ITM Stimulus Port Register 173 is shown in Table 2-322.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-322 ITM Stimulus Port Register 173 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.175 ITM Stimulus Port Register 174 (Offset = 2B8h) [Reset = 00000000h]

ITM Stimulus Port Register 174 is shown in Table 2-323.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-323 ITM Stimulus Port Register 174 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.176 ITM Stimulus Port Register 175 (Offset = 2BCh) [Reset = 00000000h]

ITM Stimulus Port Register 175 is shown in Table 2-324.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-324 ITM Stimulus Port Register 175 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.177 ITM Stimulus Port Register 176 (Offset = 2C0h) [Reset = 00000000h]

ITM Stimulus Port Register 176 is shown in Table 2-325.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-325 ITM Stimulus Port Register 176 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.178 ITM Stimulus Port Register 177 (Offset = 2C4h) [Reset = 00000000h]

ITM Stimulus Port Register 177 is shown in Table 2-326.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-326 ITM Stimulus Port Register 177 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.179 ITM Stimulus Port Register 178 (Offset = 2C8h) [Reset = 00000000h]

ITM Stimulus Port Register 178 is shown in Table 2-327.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-327 ITM Stimulus Port Register 178 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.180 ITM Stimulus Port Register 179 (Offset = 2CCh) [Reset = 00000000h]

ITM Stimulus Port Register 179 is shown in Table 2-328.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-328 ITM Stimulus Port Register 179 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.181 ITM Stimulus Port Register 180 (Offset = 2D0h) [Reset = 00000000h]

ITM Stimulus Port Register 180 is shown in Table 2-329.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-329 ITM Stimulus Port Register 180 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.182 ITM Stimulus Port Register 181 (Offset = 2D4h) [Reset = 00000000h]

ITM Stimulus Port Register 181 is shown in Table 2-330.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-330 ITM Stimulus Port Register 181 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.183 ITM Stimulus Port Register 182 (Offset = 2D8h) [Reset = 00000000h]

ITM Stimulus Port Register 182 is shown in Table 2-331.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-331 ITM Stimulus Port Register 182 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.184 ITM Stimulus Port Register 183 (Offset = 2DCh) [Reset = 00000000h]

ITM Stimulus Port Register 183 is shown in Table 2-332.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-332 ITM Stimulus Port Register 183 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.185 ITM Stimulus Port Register 184 (Offset = 2E0h) [Reset = 00000000h]

ITM Stimulus Port Register 184 is shown in Table 2-333.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-333 ITM Stimulus Port Register 184 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.186 ITM Stimulus Port Register 185 (Offset = 2E4h) [Reset = 00000000h]

ITM Stimulus Port Register 185 is shown in Table 2-334.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-334 ITM Stimulus Port Register 185 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.187 ITM Stimulus Port Register 186 (Offset = 2E8h) [Reset = 00000000h]

ITM Stimulus Port Register 186 is shown in Table 2-335.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-335 ITM Stimulus Port Register 186 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.188 ITM Stimulus Port Register 187 (Offset = 2ECh) [Reset = 00000000h]

ITM Stimulus Port Register 187 is shown in Table 2-336.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-336 ITM Stimulus Port Register 187 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.189 ITM Stimulus Port Register 188 (Offset = 2F0h) [Reset = 00000000h]

ITM Stimulus Port Register 188 is shown in Table 2-337.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-337 ITM Stimulus Port Register 188 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.190 ITM Stimulus Port Register 189 (Offset = 2F4h) [Reset = 00000000h]

ITM Stimulus Port Register 189 is shown in Table 2-338.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-338 ITM Stimulus Port Register 189 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.191 ITM Stimulus Port Register 190 (Offset = 2F8h) [Reset = 00000000h]

ITM Stimulus Port Register 190 is shown in Table 2-339.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-339 ITM Stimulus Port Register 190 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.192 ITM Stimulus Port Register 191 (Offset = 2FCh) [Reset = 00000000h]

ITM Stimulus Port Register 191 is shown in Table 2-340.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-340 ITM Stimulus Port Register 191 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.193 ITM Stimulus Port Register 192 (Offset = 300h) [Reset = 00000000h]

ITM Stimulus Port Register 192 is shown in Table 2-341.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-341 ITM Stimulus Port Register 192 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.194 ITM Stimulus Port Register 193 (Offset = 304h) [Reset = 00000000h]

ITM Stimulus Port Register 193 is shown in Table 2-342.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-342 ITM Stimulus Port Register 193 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.195 ITM Stimulus Port Register 194 (Offset = 308h) [Reset = 00000000h]

ITM Stimulus Port Register 194 is shown in Table 2-343.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-343 ITM Stimulus Port Register 194 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.196 ITM Stimulus Port Register 195 (Offset = 30Ch) [Reset = 00000000h]

ITM Stimulus Port Register 195 is shown in Table 2-344.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-344 ITM Stimulus Port Register 195 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.197 ITM Stimulus Port Register 196 (Offset = 310h) [Reset = 00000000h]

ITM Stimulus Port Register 196 is shown in Table 2-345.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-345 ITM Stimulus Port Register 196 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.198 ITM Stimulus Port Register 197 (Offset = 314h) [Reset = 00000000h]

ITM Stimulus Port Register 197 is shown in Table 2-346.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-346 ITM Stimulus Port Register 197 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.199 ITM Stimulus Port Register 198 (Offset = 318h) [Reset = 00000000h]

ITM Stimulus Port Register 198 is shown in Table 2-347.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-347 ITM Stimulus Port Register 198 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.200 ITM Stimulus Port Register 199 (Offset = 31Ch) [Reset = 00000000h]

ITM Stimulus Port Register 199 is shown in Table 2-348.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-348 ITM Stimulus Port Register 199 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.201 ITM Stimulus Port Register 200 (Offset = 320h) [Reset = 00000000h]

ITM Stimulus Port Register 200 is shown in Table 2-349.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-349 ITM Stimulus Port Register 200 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.202 ITM Stimulus Port Register 201 (Offset = 324h) [Reset = 00000000h]

ITM Stimulus Port Register 201 is shown in Table 2-350.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-350 ITM Stimulus Port Register 201 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.203 ITM Stimulus Port Register 202 (Offset = 328h) [Reset = 00000000h]

ITM Stimulus Port Register 202 is shown in Table 2-351.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-351 ITM Stimulus Port Register 202 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.204 ITM Stimulus Port Register 203 (Offset = 32Ch) [Reset = 00000000h]

ITM Stimulus Port Register 203 is shown in Table 2-352.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-352 ITM Stimulus Port Register 203 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.205 ITM Stimulus Port Register 204 (Offset = 330h) [Reset = 00000000h]

ITM Stimulus Port Register 204 is shown in Table 2-353.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-353 ITM Stimulus Port Register 204 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.206 ITM Stimulus Port Register 205 (Offset = 334h) [Reset = 00000000h]

ITM Stimulus Port Register 205 is shown in Table 2-354.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-354 ITM Stimulus Port Register 205 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.207 ITM Stimulus Port Register 206 (Offset = 338h) [Reset = 00000000h]

ITM Stimulus Port Register 206 is shown in Table 2-355.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-355 ITM Stimulus Port Register 206 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.208 ITM Stimulus Port Register 207 (Offset = 33Ch) [Reset = 00000000h]

ITM Stimulus Port Register 207 is shown in Table 2-356.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-356 ITM Stimulus Port Register 207 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.209 ITM Stimulus Port Register 208 (Offset = 340h) [Reset = 00000000h]

ITM Stimulus Port Register 208 is shown in Table 2-357.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-357 ITM Stimulus Port Register 208 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.210 ITM Stimulus Port Register 209 (Offset = 344h) [Reset = 00000000h]

ITM Stimulus Port Register 209 is shown in Table 2-358.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-358 ITM Stimulus Port Register 209 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.211 ITM Stimulus Port Register 210 (Offset = 348h) [Reset = 00000000h]

ITM Stimulus Port Register 210 is shown in Table 2-359.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-359 ITM Stimulus Port Register 210 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.212 ITM Stimulus Port Register 211 (Offset = 34Ch) [Reset = 00000000h]

ITM Stimulus Port Register 211 is shown in Table 2-360.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-360 ITM Stimulus Port Register 211 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.213 ITM Stimulus Port Register 212 (Offset = 350h) [Reset = 00000000h]

ITM Stimulus Port Register 212 is shown in Table 2-361.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-361 ITM Stimulus Port Register 212 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.214 ITM Stimulus Port Register 213 (Offset = 354h) [Reset = 00000000h]

ITM Stimulus Port Register 213 is shown in Table 2-362.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-362 ITM Stimulus Port Register 213 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.215 ITM Stimulus Port Register 214 (Offset = 358h) [Reset = 00000000h]

ITM Stimulus Port Register 214 is shown in Table 2-363.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-363 ITM Stimulus Port Register 214 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.216 ITM Stimulus Port Register 215 (Offset = 35Ch) [Reset = 00000000h]

ITM Stimulus Port Register 215 is shown in Table 2-364.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-364 ITM Stimulus Port Register 215 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.217 ITM Stimulus Port Register 216 (Offset = 360h) [Reset = 00000000h]

ITM Stimulus Port Register 216 is shown in Table 2-365.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-365 ITM Stimulus Port Register 216 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.218 ITM Stimulus Port Register 217 (Offset = 364h) [Reset = 00000000h]

ITM Stimulus Port Register 217 is shown in Table 2-366.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-366 ITM Stimulus Port Register 217 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.219 ITM Stimulus Port Register 218 (Offset = 368h) [Reset = 00000000h]

ITM Stimulus Port Register 218 is shown in Table 2-367.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-367 ITM Stimulus Port Register 218 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.220 ITM Stimulus Port Register 219 (Offset = 36Ch) [Reset = 00000000h]

ITM Stimulus Port Register 219 is shown in Table 2-368.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-368 ITM Stimulus Port Register 219 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.221 ITM Stimulus Port Register 220 (Offset = 370h) [Reset = 00000000h]

ITM Stimulus Port Register 220 is shown in Table 2-369.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-369 ITM Stimulus Port Register 220 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.222 ITM Stimulus Port Register 221 (Offset = 374h) [Reset = 00000000h]

ITM Stimulus Port Register 221 is shown in Table 2-370.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-370 ITM Stimulus Port Register 221 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.223 ITM Stimulus Port Register 222 (Offset = 378h) [Reset = 00000000h]

ITM Stimulus Port Register 222 is shown in Table 2-371.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-371 ITM Stimulus Port Register 222 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.224 ITM Stimulus Port Register 223 (Offset = 37Ch) [Reset = 00000000h]

ITM Stimulus Port Register 223 is shown in Table 2-372.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-372 ITM Stimulus Port Register 223 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.225 ITM Stimulus Port Register 224 (Offset = 380h) [Reset = 00000000h]

ITM Stimulus Port Register 224 is shown in Table 2-373.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-373 ITM Stimulus Port Register 224 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.226 ITM Stimulus Port Register 225 (Offset = 384h) [Reset = 00000000h]

ITM Stimulus Port Register 225 is shown in Table 2-374.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-374 ITM Stimulus Port Register 225 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.227 ITM Stimulus Port Register 226 (Offset = 388h) [Reset = 00000000h]

ITM Stimulus Port Register 226 is shown in Table 2-375.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-375 ITM Stimulus Port Register 226 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.228 ITM Stimulus Port Register 227 (Offset = 38Ch) [Reset = 00000000h]

ITM Stimulus Port Register 227 is shown in Table 2-376.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-376 ITM Stimulus Port Register 227 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.229 ITM Stimulus Port Register 228 (Offset = 390h) [Reset = 00000000h]

ITM Stimulus Port Register 228 is shown in Table 2-377.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-377 ITM Stimulus Port Register 228 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.230 ITM Stimulus Port Register 229 (Offset = 394h) [Reset = 00000000h]

ITM Stimulus Port Register 229 is shown in Table 2-378.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-378 ITM Stimulus Port Register 229 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.231 ITM Stimulus Port Register 230 (Offset = 398h) [Reset = 00000000h]

ITM Stimulus Port Register 230 is shown in Table 2-379.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-379 ITM Stimulus Port Register 230 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.232 ITM Stimulus Port Register 231 (Offset = 39Ch) [Reset = 00000000h]

ITM Stimulus Port Register 231 is shown in Table 2-380.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-380 ITM Stimulus Port Register 231 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.233 ITM Stimulus Port Register 232 (Offset = 3A0h) [Reset = 00000000h]

ITM Stimulus Port Register 232 is shown in Table 2-381.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-381 ITM Stimulus Port Register 232 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.234 ITM Stimulus Port Register 233 (Offset = 3A4h) [Reset = 00000000h]

ITM Stimulus Port Register 233 is shown in Table 2-382.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-382 ITM Stimulus Port Register 233 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.235 ITM Stimulus Port Register 234 (Offset = 3A8h) [Reset = 00000000h]

ITM Stimulus Port Register 234 is shown in Table 2-383.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-383 ITM Stimulus Port Register 234 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.236 ITM Stimulus Port Register 235 (Offset = 3ACh) [Reset = 00000000h]

ITM Stimulus Port Register 235 is shown in Table 2-384.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-384 ITM Stimulus Port Register 235 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.237 ITM Stimulus Port Register 236 (Offset = 3B0h) [Reset = 00000000h]

ITM Stimulus Port Register 236 is shown in Table 2-385.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-385 ITM Stimulus Port Register 236 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.238 ITM Stimulus Port Register 237 (Offset = 3B4h) [Reset = 00000000h]

ITM Stimulus Port Register 237 is shown in Table 2-386.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-386 ITM Stimulus Port Register 237 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.239 ITM Stimulus Port Register 238 (Offset = 3B8h) [Reset = 00000000h]

ITM Stimulus Port Register 238 is shown in Table 2-387.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-387 ITM Stimulus Port Register 238 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.240 ITM Stimulus Port Register 239 (Offset = 3BCh) [Reset = 00000000h]

ITM Stimulus Port Register 239 is shown in Table 2-388.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-388 ITM Stimulus Port Register 239 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.241 ITM Stimulus Port Register 240 (Offset = 3C0h) [Reset = 00000000h]

ITM Stimulus Port Register 240 is shown in Table 2-389.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-389 ITM Stimulus Port Register 240 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.242 ITM Stimulus Port Register 241 (Offset = 3C4h) [Reset = 00000000h]

ITM Stimulus Port Register 241 is shown in Table 2-390.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-390 ITM Stimulus Port Register 241 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.243 ITM Stimulus Port Register 242 (Offset = 3C8h) [Reset = 00000000h]

ITM Stimulus Port Register 242 is shown in Table 2-391.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-391 ITM Stimulus Port Register 242 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.244 ITM Stimulus Port Register 243 (Offset = 3CCh) [Reset = 00000000h]

ITM Stimulus Port Register 243 is shown in Table 2-392.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-392 ITM Stimulus Port Register 243 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.245 ITM Stimulus Port Register 244 (Offset = 3D0h) [Reset = 00000000h]

ITM Stimulus Port Register 244 is shown in Table 2-393.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-393 ITM Stimulus Port Register 244 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.246 ITM Stimulus Port Register 245 (Offset = 3D4h) [Reset = 00000000h]

ITM Stimulus Port Register 245 is shown in Table 2-394.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-394 ITM Stimulus Port Register 245 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.247 ITM Stimulus Port Register 246 (Offset = 3D8h) [Reset = 00000000h]

ITM Stimulus Port Register 246 is shown in Table 2-395.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-395 ITM Stimulus Port Register 246 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.248 ITM Stimulus Port Register 247 (Offset = 3DCh) [Reset = 00000000h]

ITM Stimulus Port Register 247 is shown in Table 2-396.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-396 ITM Stimulus Port Register 247 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.249 ITM Stimulus Port Register 248 (Offset = 3E0h) [Reset = 00000000h]

ITM Stimulus Port Register 248 is shown in Table 2-397.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-397 ITM Stimulus Port Register 248 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.250 ITM Stimulus Port Register 249 (Offset = 3E4h) [Reset = 00000000h]

ITM Stimulus Port Register 249 is shown in Table 2-398.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-398 ITM Stimulus Port Register 249 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.251 ITM Stimulus Port Register 250 (Offset = 3E8h) [Reset = 00000000h]

ITM Stimulus Port Register 250 is shown in Table 2-399.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-399 ITM Stimulus Port Register 250 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.252 ITM Stimulus Port Register 251 (Offset = 3ECh) [Reset = 00000000h]

ITM Stimulus Port Register 251 is shown in Table 2-400.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-400 ITM Stimulus Port Register 251 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.253 ITM Stimulus Port Register 252 (Offset = 3F0h) [Reset = 00000000h]

ITM Stimulus Port Register 252 is shown in Table 2-401.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-401 ITM Stimulus Port Register 252 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.254 ITM Stimulus Port Register 253 (Offset = 3F4h) [Reset = 00000000h]

ITM Stimulus Port Register 253 is shown in Table 2-402.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-402 ITM Stimulus Port Register 253 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.255 ITM Stimulus Port Register 254 (Offset = 3F8h) [Reset = 00000000h]

ITM Stimulus Port Register 254 is shown in Table 2-403.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-403 ITM Stimulus Port Register 254 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.256 ITM Stimulus Port Register 255 (Offset = 3FCh) [Reset = 00000000h]

ITM Stimulus Port Register 255 is shown in Table 2-404.

Return to the Summary Table.

Provides the interface for generating Instrumentation packets

Table 2-404 ITM Stimulus Port Register 255 Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1DisabledR0hIndicates whether the Stimulus Port is enabled or disabled
0FIFO readyR0hIndicates whether the Stimulus Port can accept data
31-0Stimulus dataW0hData to write to the Stimulus Port FIFO, for forwarding as an Instrumentation packet. The size of write access determines the type of Instrumentation packet generated.

2.7.9.257 ITM Trace Enable Register 0 (Offset = E00h) [Reset = 00000000h]

ITM Trace Enable Register 0 is shown in Table 2-405.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-405 ITM Trace Enable Register 0 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.258 ITM Trace Enable Register 1 (Offset = E04h) [Reset = 00000000h]

ITM Trace Enable Register 1 is shown in Table 2-406.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-406 ITM Trace Enable Register 1 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.259 ITM Trace Enable Register 2 (Offset = E08h) [Reset = 00000000h]

ITM Trace Enable Register 2 is shown in Table 2-407.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-407 ITM Trace Enable Register 2 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.260 ITM Trace Enable Register 3 (Offset = E0Ch) [Reset = 00000000h]

ITM Trace Enable Register 3 is shown in Table 2-408.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-408 ITM Trace Enable Register 3 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.261 ITM Trace Enable Register 4 (Offset = E10h) [Reset = 00000000h]

ITM Trace Enable Register 4 is shown in Table 2-409.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-409 ITM Trace Enable Register 4 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.262 ITM Trace Enable Register 5 (Offset = E14h) [Reset = 00000000h]

ITM Trace Enable Register 5 is shown in Table 2-410.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-410 ITM Trace Enable Register 5 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.263 ITM Trace Enable Register 6 (Offset = E18h) [Reset = 00000000h]

ITM Trace Enable Register 6 is shown in Table 2-411.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-411 ITM Trace Enable Register 6 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.264 ITM Trace Enable Register 7 (Offset = E1Ch) [Reset = 00000000h]

ITM Trace Enable Register 7 is shown in Table 2-412.

Return to the Summary Table.

Provide an individual enable bit for each ITM_STIM register

Table 2-412 ITM Trace Enable Register 7 Field Descriptions
BitFieldTypeResetDescription
31-0Stimulus enableR/W0hFor STIMENA[m] in ITM_TER*n, controls whether ITM_STIM(32*n + m) is enabled

2.7.9.265 ITM Trace Privilege Register (Offset = E40h) [Reset = 00000000h]

ITM Trace Privilege Register is shown in Table 2-413.

Return to the Summary Table.

Controls which stimulus ports can be accessed by unprivileged code

Table 2-413 ITM Trace Privilege Register Field Descriptions
BitFieldTypeResetDescription
31-4RESERVEDR0hReserved, RES0
3-0Privilege maskR/W0hBit mask to enable tracing on ITM stimulus ports

2.7.9.266 ITM Trace Control Register (Offset = E80h) [Reset = 00000000h]

ITM Trace Control Register is shown in Table 2-414.

Return to the Summary Table.

Configures and controls transfers through the ITM interface

Table 2-414 ITM Trace Control Register Field Descriptions
BitFieldTypeResetDescription
31-24RESERVEDR0hReserved, RES0
23ITM busyR0hIndicates whether the ITM is currently processing events
22-16Trace bus identityR/W0hIdentifier for multi-source trace stream formatting. If multi-source trace is in use, the debugger must write a unique non-zero trace ID value to this field
15-12RESERVEDR0hReserved, RES0
11-10Global timestamp frequencyR/W0hDefines how often the ITM generates a global timestamp, based on the global timestamp clock frequency, or disables generation of global timestamps
9-8Timestamp prescaleR/W0hLocal timestamp prescaler, used with the trace packet reference clock
7-6RESERVEDR0hReserved, RES0
5Stall enableR/W0hStall the PE to guarantee delivery of Data Trace packets.
4SWO enableR/W0hEnables asynchronous clocking of the timestamp counter
3Transmit enableR/W0hEnables forwarding of hardware event packet from the DWT unit to the ITM for output to the TPIU
2Synchronization enableR/W0hEnables Synchronization packet transmission for a synchronous TPIU
1Timestamp enableR/W0hEnables Local timestamp generation
0ITM enableR/W0hEnables the ITM

2.7.9.267 INT_ATREADY Register (Offset = EF0h) [Reset = 00000000h]

INT_ATREADY is shown in Table 2-415.

Return to the Summary Table.

Integration Mode: Read ATB Ready

Table 2-415 INT_ATREADY Register Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1AFVALIDR0hA read of this bit returns the value of AFVALID
0ATREADYR0hA read of this bit returns the value of ATREADY

2.7.9.268 INT_ATVALID Register (Offset = EF8h) [Reset = 00000000h]

INT_ATVALID is shown in Table 2-416.

Return to the Summary Table.

Integration Mode: Write ATB Valid

Table 2-416 INT_ATVALID Register Field Descriptions
BitFieldTypeResetDescription
31-2RESERVEDR0hReserved, RES0
1AFREADYW0hA write to this bit gives the value of AFREADY
0ATVALIDW0hA write to this bit gives the value of ATVALID

2.7.9.269 ITM_ITCTRL Register (Offset = F00h) [Reset = 00000000h]

ITM_ITCTRL is shown in Table 2-417.

Return to the Summary Table.

Integration Mode Control Register

Table 2-417 ITM_ITCTRL Register Field Descriptions
BitFieldTypeResetDescription
31-1RESERVEDR0hReserved, RES0
0Integration mode enable bitR/W0hIntegration mode enable bit - The possible values are: 0 - The trace unit is not in integration mode. 1 - The trace unit is in integration mode. This mode enables: A debug agent to perform topology detection. SoC test software to perform integration testing.

2.7.9.270 ITM Device Architecture Register (Offset = FBCh) [Reset = 47701A01h]

ITM Device Architecture Register is shown in Table 2-418.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-418 ITM Device Architecture Register Field Descriptions
BitFieldTypeResetDescription
31-21ArchitectR23BhDefines the architect of the component. Bits [31:28] are the JEP106 continuation code (JEP106 bank ID, minus 1) and bits [27:21] are the JEP106 ID code.
20DEVARCH PresentR1hDefines that the DEVARCH register is present
19-16RevisionR0hDefines the architecture revision of the component
15-12Architecture VersionR1hDefines the architecture version of the component
11-0Architecture PartRA01hDefines the architecture of the component

2.7.9.271 ITM Device Type Register (Offset = FCCh) [Reset = 00000043h]

ITM Device Type Register is shown in Table 2-419.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-419 ITM Device Type Register Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-4Sub-typeR4hComponent sub-type
3-0Major typeR3hComponent major type

2.7.9.272 ITM Peripheral Identification Register 4 (Offset = FD0h) [Reset = 00000004h]

ITM Peripheral Identification Register 4 is shown in Table 2-420.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-420 ITM Peripheral Identification Register 4 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-44KB countR0hSee CoreSight Architecture Specification
3-0JEP106 continuation codeR4hSee CoreSight Architecture Specification

2.7.9.273 ITM Peripheral Identification Register 5 (Offset = FD4h) [Reset = 00000000h]

ITM Peripheral Identification Register 5 is shown in Table 2-421.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-421 ITM Peripheral Identification Register 5 Field Descriptions
BitFieldTypeResetDescription
31-0RESERVEDR0hReserved, RES0

2.7.9.274 ITM Peripheral Identification Register 6 (Offset = FD8h) [Reset = 00000000h]

ITM Peripheral Identification Register 6 is shown in Table 2-422.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-422 ITM Peripheral Identification Register 6 Field Descriptions
BitFieldTypeResetDescription
31-0RESERVEDR0hReserved, RES0

2.7.9.275 ITM Peripheral Identification Register 7 (Offset = FDCh) [Reset = 00000000h]

ITM Peripheral Identification Register 7 is shown in Table 2-423.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-423 ITM Peripheral Identification Register 7 Field Descriptions
BitFieldTypeResetDescription
31-0RESERVEDR0hReserved, RES0

2.7.9.276 ITM Peripheral Identification Register 0 (Offset = FE0h) [Reset = 00000021h]

ITM Peripheral Identification Register 0 is shown in Table 2-424.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-424 ITM Peripheral Identification Register 0 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-0Part number bits [7:0]R21hSee CoreSight Architecture Specification

2.7.9.277 ITM Peripheral Identification Register 1 (Offset = FE4h) [Reset = 000000BDh]

ITM Peripheral Identification Register 1 is shown in Table 2-425.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-425 ITM Peripheral Identification Register 1 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-4JEP106 identification code bits [3:0]RBhSee CoreSight Architecture Specification
3-0Part number bits [11:8]RDhSee CoreSight Architecture Specification

2.7.9.278 ITM Peripheral Identification Register 2 (Offset = FE8h) [Reset = 0000000Bh]

ITM Peripheral Identification Register 2 is shown in Table 2-426.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-426 ITM Peripheral Identification Register 2 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-4Component revisionR0hSee CoreSight Architecture Specification
3JEDEC assignee value is usedR1hSee CoreSight Architecture Specification
2-0JEP106 identification code bits [6:4]R3hSee CoreSight Architecture Specification

2.7.9.279 ITM Peripheral Identification Register 3 (Offset = FECh) [Reset = 00000000h]

ITM Peripheral Identification Register 3 is shown in Table 2-427.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-427 ITM Peripheral Identification Register 3 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-4RevAndR0hSee CoreSight Architecture Specification
3-0Customer ModifiedR0hSee CoreSight Architecture Specification

2.7.9.280 ITM Component Identification Register 0 (Offset = FF0h) [Reset = 0000000Dh]

ITM Component Identification Register 0 is shown in Table 2-428.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-428 ITM Component Identification Register 0 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-0CoreSight component identification preambleRDhSee CoreSight Architecture Specification

2.7.9.281 ITM Component Identification Register 1 (Offset = FF4h) [Reset = 00000090h]

ITM Component Identification Register 1 is shown in Table 2-429.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-429 ITM Component Identification Register 1 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-4CoreSight component classR9hSee CoreSight Architecture Specification
3-0CoreSight component identification preambleR0hSee CoreSight Architecture Specification

2.7.9.282 ITM Component Identification Register 2 (Offset = FF8h) [Reset = 00000005h]

ITM Component Identification Register 2 is shown in Table 2-430.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-430 ITM Component Identification Register 2 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-0CoreSight component identification preambleR5hSee CoreSight Architecture Specification

2.7.9.283 ITM Component Identification Register 3 (Offset = FFCh) [Reset = 000000B1h]

ITM Component Identification Register 3 is shown in Table 2-431.

Return to the Summary Table.

Provides CoreSight discovery information for the ITM

Table 2-431 ITM Component Identification Register 3 Field Descriptions
BitFieldTypeResetDescription
31-8RESERVEDR0hReserved, RES0
7-0CoreSight component identification preambleRB1hSee CoreSight Architecture Specification