AFE7900
- Request full data sheet
- Quad RF sampling 12-GSPS transmit DACs
- Quad RF sampling 3-GSPS receive ADCs
- Dual RF sampling 3-GSPS feedback (auxilliary RX) ADCs
- Maximum RF signal bandwidth:
- 4TX or 2FB: 1200 MHz or 2TX: 2400 MHz
- RX): 1200 MHz (no FB), 600 MHz (with FB)
- RF frequency range:
- TX: 5MHz - 7.4GHz
- RX/FB: 5MHz - 7.4GHz
- Digital step attenuators (DSA):
- TX: 40 dB range, 0.125-dB steps
- RX or FB: 25 dB range, 0.5-dB steps
- Single or dual-band DUC or DDCs for TX and RX
- 16x NCOs per TX or RX and FB
- Optional Internal PLL or VCO for DAC or ADC clocks or external clock at DAC or ADC sample rate
- Sysref Alignment Detector
- SerDes data interface:
- JESD204B and JESD204C compatible
- 8 SerDes transceivers up to 29.5 Gbps
- Subclass 1 multi-device synchronization
- Package: 17-mm × 17-mm FCBGA, 0.8-mm pitch
The AFE7900 is a high performance, wide bandwidth multi-channel transceiver, integrating four RF sampling transmitter chains, four RF sampling receiver chains and two RF sampling feedback chains (six RF sampling ADCs total). With operation up to 7.4 GHz, this device enables direct RF sampling in the L, S and C-band frequency ranges without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.
The TX signal paths support interpolation and digital up conversion options that deliver up to 1200 MHz of signal bandwidth for four TX or 2400 MHz for two TX. The output of the DUCs drives a 12-GSPS DAC (digital to analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40-dB range and 1-dB analog and 0.125-dB digital steps.
Each receiver chain includes a 25-dB range DSA (Digital Step Attenuator), followed by a 3-GSPS ADC (analog-to-digital converter). Each receiver channel has an analog peak power detector and various digital power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. Flexible decimation options provide optimization of data bandwidth up to 1200 MHz for four RX without FB paths or 600 MHz with two FB paths (1200 MHz BW each).
The device contains a SYSREF timing detector to allow optimization of the SYSREF input timing relative to the device clock.
관심 가지실만한 유사 제품
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | AFE7900 4T6R RF Sampling AFE with 12 GSPS DACs and 3 GSPS ADCs datasheet (Rev. B) | PDF | HTML | 2023. 6. 30 | |
| 애플리케이션 노트 | AFE79xx Linux Driver | PDF | HTML | 2026. 7. 30 | ||
| 애플리케이션 노트 | AFE79xx Bringup Using HDL Module Without Microcontroller | PDF | HTML | 2025. 8. 14 | ||
| 애플리케이션 노트 | AFE79XX as a Chirp Signal Generator | PDF | HTML | 2024. 7. 10 | ||
| 애플리케이션 노트 | Debugging AFE7950 for Run Time and Post Bring-Up Failure | PDF | HTML | 2024. 6. 28 | ||
| 사용 설명서 | AFE79xx SPI Bringup Guide With Xilinx FPGAs (Rev. A) | PDF | HTML | 2024. 5. 5 | ||
| 애플리케이션 노트 | AFE79xx as Single Chip Wideband Repeater Solution (Rev. A) | PDF | HTML | 2023. 5. 30 | ||
| 애플리케이션 노트 | Determining Optimal Receive Buffer Delay in JESD204B and JESD204C Receivers | PDF | HTML | 2022. 7. 7 | ||
| 애플리케이션 노트 | How to Achieve Frequency Hopping with the AFE79xx | 2020. 7. 2 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AFE7900EVM — AFE7900 4전송, 6수신, 5MHz~7400MHz RF 샘플링 AFE용 평가 모듈
AFE7900 제품군 평가 모듈(EVM)은 최대 4개의 전송, 4개의 수신 및 2개의 피드백(4T4R+2FB) 채널을 동시에 지원하도록 구성할 수 있는 RF 샘플링 송수신기 플랫폼입니다. EVM는 아래 TI 패턴/캡처 카드 솔루션(별도 판매)뿐만 아니라 많은 FPGA FMC 호환 개발 키트와 상호 작용합니다.
AFE79XX-HSC-DESIGN — AFE79xx family high-speed transceiver design & support files
TI204C-IP — Request for JESD204 rapid design IP
JESD204 고속 설계 IP는 FPGA 엔지니어가 JESD204 시스템으로 작동하는 경로를 가속화할 수 있도록 설계 IP는 다운스트림 디지털 처리 및 기타 애플리케이션 로직이 JESD204 프로토콜 대부분의 성능 및 타이밍에 중요한 제약 조건으로부터 격리되는 방식으로 설계되었습니다. IP는 설계자가 펌웨어 개발 시간을 단축하고 FPGA 통합을 쉽게 수행할 수 있도록 지원합니다.
JESD204 고속 설계 IP는 TI 고속 데이터 컨버터와 함께 사용할 수 있도록 로열티 없이 제공됩니다. TI는 특정 FPGA 플랫폼과 TI 데이터 (...)
DATACONVERTERPRO-SW — 고속 데이터 컨버터 프로 GUI 설치 프로그램, v5.31
이 고속 데이터 컨버터 프로 GUI는 대부분의 TI 고속 데이터 컨버터 [ADC(아날로그-디지털 컨버터) 및 DAC(디지털-아날로그 컨버터)] 및 AFE(아날로그 프론트 엔드) 플랫폼을 평가할 수 있도록 설계된 PC(Windows® XP/7/10 호환) 프로그램입니다. 전체 TSW14xxx 시리즈의 데이터 캡처 및 패턴 생성 카드를 지원하도록 설계된 DATACONVERTERPRO-SW는 시간 및 주파수 영역 모두에서 데이터 컨버터를 분석할 수 있는 강력하고 빠른 솔루션과 단일 톤, 멀티톤 및 변조 신호 지원을 제공합니다. 또한 이 (...)
TIDA-010230 — 레이더 및 EW 애플리케이션을 위한 멀티 채널 RF 트랜시버, 저잡음 클로킹 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCBGA (ALK) | 400 | Ultra Librarian |
| FCBGA (ABJ) | 400 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.