CC3130
- Integrated Wi-Fi and internet protocols
- Coexistence with BLE radios (CC13x2/CC26x2)
- Rich set of IoT security features helps developers protect data
- Low-power modes for battery powered application
- Network-assisted roaming
- Industrial temperature: –40°C to +85°C
- Transferable Wi-Fi Alliance certification
-
Wi-Fi network processor subsystem:
- Wi-Fi core:
- 802.11b/g/n 2.4GHz
- Modes:
- Access point (AP)
- Station (STA)
- Wi-Fi Direct
- Security:
- WEP
- WPA™/ WPA2™ PSK
- WPA2 Enterprise
- WPA3™ Personal
- WPA3™ Enterprise
- Internet and application protocols:
- HTTPs server, mDNS, DNS-SD, DHCP
- IPv4 and IPv6 TCP/IP stack
- 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
- Built-in power management subsystem:
- Configurable low-power profiles (always, intermittent, tag)
- Advanced low-power modes
- Integrated DC/DC regulators
- Wi-Fi core:
-
Multilayered security features:
- Separate execution environments
- Networking security
- Device identity and key
- Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
- File-system security (encryption, authentication, access control)
- Initial secure programming
- Software tamper detection
- Certificate signing request (CSR)
- Unique per device key pair
- Application throughput:
- UDP: 16Mbps, TCP: 13Mbps
- Peak: 72Mbps
-
Power-management
subsystem:
- Integrated DC/DC
converters support a wide range of supply voltage:
- VBAT wide-voltage mode: 2.1V to 3.6V
- VIO is always tied with VBAT
- Advanced low-power modes:
- Shutdown: 1µA, hibernate: 4µA
- Low-power deep sleep (LPDS): 120µA
- Idle connected (MCU in LPDS): 710µA
- RX traffic (MCU active): 53mA
- TX traffic (MCU active): 223mA
- Integrated DC/DC
converters support a wide range of supply voltage:
- Wi-Fi TX power:
- 18.0dBm at 1 DSSS
- 14.5dBm at 54 OFDM
- Wi-Fi RX sensitivity:
- –96dBm at 1 DSSS
- –74.5dBm at 54 OFDM
- Clock source:
- 40.0MHz crystal with internal oscillator
- 32.768kHz crystal or external RTC
- RGK package
- 64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitch
- Device supports SimpleLink™ MCU Platform developers ecosystem
Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3130 device from Texas Instruments. The SimpleLink™ Wi-Fi CC3130 Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, in order to offload networking activities from the host MCU. The subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built in power management for best in class low power performance.
The Wi-Fi CERTIFIED® CC3130 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature.
This generation introduces new capabilities that further simplify the connectivity of things to the internet. The main new features include:
- Bluetooth Low Energy and Wi-Fi 2.4GHz radio coexistence (CC13x2/CC26x2)
- Antenna selection
- Up to 16 concurrent secure sockets
- Certificate sign request (CSR)
- Online certificate status protocol (OCSP)
- Wi-Fi Alliance certified IoT power-saving features (such as BSS max idle, DMS, and proxy ARP)
- Hostless mode for offloading template packet transmissions
- Network-assisted roaming
The CC3130 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency).
The CC3130 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz, and host MCUs. For more information, visit www.ti.com/simplelink.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-CC3135 — SimpleLink™ Wi-Fi® CC3135 이중 대역 무선 네트워크 프로세서 BoosterPack™ 플러그인 모듈
CC3XXXRADIOTEST — SimpleLink™ Wi-Fi® 무선 테스팅 툴
SimpleLink™ Wi-Fi® 무선 테스트 툴은 개발 및 인증 중 SimpleLink Wi-Fi CC31xx 및 CC32xx 설계를 RF 평가 및 테스트할 수 있는 Windows 기반 소프트웨어 툴입니다. 이 도구는 라디오를 전송 또는 수신 모드로 수동 설정해 낮은 수준의 라디오를 테스트하는 기능을 지원합니다. 이 툴을 사용하려면 무선 회로 이론 및 무선 테스트 방법에 대한 지식이 필요합니다.
IoT(사물 인터넷)용으로 제작된 SimpleLink Wi-Fi CC31xx 및 CC32xx 장치에는 온칩 Wi-Fi, 인터넷 및 (...)
CCSTUDIO — CCStudio™ IDE(통합 개발 환경)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
SIMPLELINK-ACADEMY-CC32XX — SimpleLink™ Academy for CC32xx
TI-RTOS-MCU — TI-RTOS: 마이크로컨트롤러(MCU)를 위한 실시간 운영 체제(RTOS)
이 페이지의 TI-RTOS 패키지는 기존 장치용이며 지원을 사용할 수 없습니다. 새로운 장치의 경우 TI-RTOS를 사용할 수 있다면 해당 장치의 소프트웨어 개발 키트(SDK)에 포함되어 있을 것입니다.
TI-RTOS로 MCU 애플리케이션을 더 빠르게 개발
TI-RTOS는 기본 시스템 소프트웨어 기능을 처음부터 만들 필요가 없기 때문에 개발 일정을 크게 단축할 수 있습니다. TI-RTOS는 실시간 멀티태스킹 커널(TI-RTOS 커널)부터 추가 미들웨어 부품, 장치 드라이버 및 전원 관리가 포함된 완전한 RTOS 솔루션까지 확장할 (...)
WIFISTARTERPRO — SimpleLink™ Wi-Fi® 스타터 프로
iTunes App Store에서 다운로드
Google Play에서 다운로드
SimpleLink™ Wi-Fi® 스타터 프로 모바일 앱은 SimpleLink 프로비저닝을 위한 새로운 모바일 애플리케이션입니다. 장치 측에서 실행되는 임베디드 프로비저닝 라이브러리 및 예제와 함께 제공됩니다. 새로운 프로비저닝 릴리스는 SimpleLink Wi-Fi 제품을 사용한 Wi-Fi 프로비저닝을 위한 TI의 권장 사항입니다. 성공적인 프로세스를 보장하기 위해 피드백 및 폴백 옵션과 함께 고급 AP 모드 프로비저닝을 구현합니다. 고객은 임베디드 (...)
SIMPLELINK-SDK-WIFI-PLUGIN — SimpleLink™ software development kit (SDK) Wi-Fi® plug-in
The SimpleLink SDK Wi-Fi Plug-in contains drivers, many sample applications for Wi-Fi features and internet, and documentation needed to use the CC3120 or CC3135 Internet-on-a-chip™ solutions. This Plug-in is a companion software package that enables the use of a Wi-Fi radio on any standard (...)
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash는 TI의 광범위한 CCStudio™ 개발 에코시스템의 일부로, TI 마이크로컨트롤러 및 무선 연결 장치의 온칩 플래시와 TI 프로세서의 온보드 플래시를 프로그래밍하기 위한 소프트웨어 도구입니다. UniFlash는 그래픽 및 명령줄 인터페이스를 모두 제공하며, 데스크톱 또는 클라우드 환경에서 실행할 수 있습니다.
UniFlash는 CCStudio™ 개발자 영역의 클라우드에서 실행하거나 Windows®, Linux®, macOS® 컴퓨터에서 다운로드해 사용할 수 있습니다.
macOS는 mmWave, AMx, K2G 및 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGK) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.