Top
Sub-1 GHz wireless MCU with up to 32 kB flash memory

CC1110-CC1111

ACTIVE

Product details

Parameters

Protocols Proprietary Frequency bands (MHz) 300-348, 391-464, 782-928 TX power (Max) (dBm) 10 RAM (KB) 4 Flash (KB) 32 CPU core 8051 Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 5 timers, I2S, USB Sensitivity (best) (dBm) -110 GPIO 21 RX current (lowest) (mA) 16.2 Data rate (Max) (kbps) 500 Rating Catalog Operating temperature range (C) -40 to 85, 0 to 85 open-in-new Find other Sub-1 GHz products

Package | Pins | Size

VQFN (RHH) 36 36 mm² 6 x 6 VQFNP (RSP) 36 36 mm² 6 x 6 open-in-new Find other Sub-1 GHz products

Features

  • Radio
    • High-performance RF transceiver based on the
      market-leading CC1101
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (–110 dBm at 1.2 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 10 dBm
      for all supported frequencies
    • Frequency range: 300 – 348 MHz, 391 – 464 MHz
      and 782 – 928 MHz
    • Digital RSSI / LQI support
  • Low Power
    • Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2
      mA at −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest
      power consumption)
    • 0.5 µA in PM2 (operating mode with the second lowest power
      consumption, timer or external interrupt wakeup)
    • RoHS Compliant 6 mm × 6 mm QFN-40 Package
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller
      core.
    • Powerful DMA functionality
    • 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
    • Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
    • 128-bit AES security coprocessor
    • 7 – 12 bit ADC with up to eight inputs
    • I2S interface
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
    • SW compatible with CC2510Fx, CC2511Fx
  • General
    • Wide supply voltage range (2.0V – 3.6V)
    • RoHS compliant 6×6 mm QFN 36 package
open-in-new Find other Sub-1 GHz products

Description

The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

open-in-new Find other Sub-1 GHz products
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 39
Type Title Date
* Datasheet True System-on-Chip with Low-Power RF Transceiver and 8051 MCU datasheet (Rev. H) Jul. 10, 2013
* Errata CC1110Fx/CC1111Fx Errata Note (Rev. C) Dec. 04, 2012
Technical articles Bluetooth® Low Energy shifts gears for car access Jul. 15, 2019
Application notes DN507 -- FEC Decoding Mar. 21, 2019
Technical articles Top 3 design challenges that the new generation of SimpleLink™ Wi-Fi® devices will help you overcome Feb. 21, 2019
White papers Migrating your proprietary solution to the SimpleLink™ WMCU Nov. 07, 2018
Application notes CC11xx Sensitivity Versus Frequency Offset and Crystal Accuracy (Rev. D) Sep. 27, 2018
Application notes CRC Implementation (Rev. E) Sep. 27, 2018
Technical articles Exploring the impact of IoT on innovation Jul. 17, 2018
Technical articles An out-of-the-box Internet of Things: building a seamless and secure smart home network Jun. 12, 2018
Application notes DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) Feb. 22, 2013
Application notes DN035 -- Antenna Quick Guide (Rev. A) Feb. 12, 2013
Application notes DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) Mar. 21, 2012
Application notes DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E) Mar. 08, 2012
Application notes DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A) Nov. 07, 2011
Application notes DN025 -- Johanson Technology Matched Balun Filters (Rev. A) Oct. 13, 2011
Application notes AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) Sep. 08, 2011
Application notes DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) Aug. 30, 2011
Application notes AN099 - Wireless Microphone with USB Interface Jun. 01, 2011
Application notes AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A) May 02, 2011
Application notes AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220 Jan. 11, 2011
Application notes AN058 -- Antenna Selection Guide (Rev. B) Oct. 06, 2010
Application notes AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A) Sep. 30, 2010
Application notes DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary Aug. 26, 2010
Application notes DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B) Aug. 17, 2010
Application notes DN505 -- RSSI interpretation and timing (Rev. D) Jun. 16, 2010
Application notes DN107 -- DMA and Radio Configuration (Rev. A) Dec. 17, 2009
Application notes DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board Dec. 01, 2009
Application notes DN117 -- SimpliciTI-compatible UART Driver Sep. 22, 2009
Application notes AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 Sep. 16, 2009
Application notes DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) Aug. 11, 2009
Application notes DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) Aug. 11, 2009
Application notes DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices Aug. 03, 2009
Application notes DN115 -- Using PWM for Dimmer Function in LED Lighting Jun. 16, 2009
Application notes DN111 - Current Consumption for a Polling Receiver (Rev. A) Mar. 24, 2009
Application notes DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) Mar. 31, 2008
Application notes DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) Oct. 22, 2007
Application notes DN102 -- SoC Temperature Sensor (Rev. A) Oct. 22, 2007
Application notes DN504 -- FEC Implementation (Rev. A) Oct. 22, 2007

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Software development

CODE EXAMPLES & DEMOS Download
SWRC085B.ZIP (285 KB)
CODE EXAMPLES & DEMOS Download
SWRC117.ZIP (546 KB)
DEBUG PROBES Download
Debugger and Programmer for RF System-on-Chips
CC-DEBUGGER The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
49
Features

Contents in the box:

  • CC Debugger
  • Mini USB cable
  • 10-pin flat cable with 2x5 2.54mm connector
  • 10-pin flat cable with 2x5 1.27mm connector
  • Converter board 2.54mm-1.27mm connector
  • Documentation

CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:

  • CC1110 (...)

DRIVERS & LIBRARIES Download
SimpliciTI Compliant Protocol Stack
SIMPLICITI — SimpliciTI is a simple low-power RF network protocol aimed at small RF networks. SimpliciTI was designed for easy implementation and deployment out-of-the-box on several TI RF platforms such as the MSP430 family of low-power MCUs and the CC1XXX/CC25XX/CC430 transceivers and SoCs.

Small RF networks (...)
Features
  • Low power - A TI proprietary low-power network protocol
  • Flexible:
    • Direct device-to-device communication
    • Simple star with access point for store and forward to end device
    • Range extenders to increase range to 4 hops
  • Simple - Utilizes a 5 command API
  • Low data rate and low duty cycle
  • Ease-of-use
  • Application (...)
FIRMWARE Download
SWRC088C.ZIP (1316 KB)

Design tools & simulation

CALCULATION TOOLS Download
Third party wireless module search tool
3P-WIRELESS-MODULES The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
Features
  • Modules listed are based on TI wireless technology supporting Wi-Fi®, Bluetooth®, Zigbee®, Sub-1 GHz, Sigfox, 2.4 GHz, multi-band connectivity and more
  • Modules integrate clocks, SPI flash and passive components
  • Listings included for hardware customization, software integration and cloud services
  • Listings (...)
CALCULATION TOOLS Download
SmartRF Protocol Packet Sniffer
PACKET-SNIFFER The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
document-generic User guide
CALCULATION TOOLS Download
TI RF Range Estimator
RF-RANGE-ESTIMATOR — This tool is used to complete a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation of (...)
Features
  • Range estimate spreadsheet for Sub-1 GHz and 2.4 GHz devices
  • Range debug checklist
CALCULATION TOOLS Download
SmartRF Studio
SMARTRFTM-STUDIO SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
document-generic User guide
Features
  • Link tests. Send and Receive packets between nodes.
  • Antenna and radiation tests. Set the radio in continuous wave TX and RX states.
  • A set of recommended/typical register settings for all devices.
  • Read and write individual RF registers.
  • Execute individual commands to control the radio.
  • Detailed (...)
DESIGN TOOLS Download
Hardware design reviews for SimpleLink™ CC1xxx devices
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS To get started with the SimpleLink™ Sub-1GHz hardware design review process:
  • Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
  • Step 2 (...)

CAD/CAE symbols

Package Pins Download
VQFN (RHH) 36 View options
VQFN (RSP) 36 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos