Inicio Microcontroladores (MCU) y procesadores Microcontroladores Real-time motor control & automation MCUs
Inicio
Microcontroladores (MCU) y procesadores
Microcontroladores
Real-time motor control & automation MCUs
NUEVO

AM2612

ACTIVO

MCU de doble núcleo Arm® Cortex®-R5F a 500 MHz con control, seguridad y protección en tiempo real

Haga su pedido ahora
Hoja de datos
Guías de usuario
Errata

AM2612

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

CPU Arm Cortex-R5F Frequency (MHz) 500 ADC type 3 12-bit SAR Total processing (MIPS) 0.001 Features Automation, CAN, CAN FD, EnDat 2.2, EtherCAT, EtherNet/IP, Ethernet, External memory interface, FSI, Hardware encrpytion (AES/DES/SHA/MD5), I2C, IO-Link, Integrated industrial protocols, OSPI, Profinet, Robotics, SD/SDIO, SPI, UART UART 6 CAN (#) 2 (CAN-FD) PWM (Ch) 20 TI functional safety category Functional Safety-Compliant Number of ADC channels 21 SPI 2, 4 USB USB 2.0 Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, CAN-FD, FSI, I2C, OSPI, SD/SDIO, SPI, UART Operating system BareMetal (No OS), FreeRTOS, ThreadX, Zephyr RTOS Hardware accelerators Trigonometric math accelerator Edge AI enabled Yes Number of GPIOs 140 Security Cryptographic acceleration, Device lifecycle management, Secure boot, Secure debug, Secure provisioning
CPU Arm Cortex-R5F Frequency (MHz) 500 ADC type 3 12-bit SAR Total processing (MIPS) 0.001 Features Automation, CAN, CAN FD, EnDat 2.2, EtherCAT, EtherNet/IP, Ethernet, External memory interface, FSI, Hardware encrpytion (AES/DES/SHA/MD5), I2C, IO-Link, Integrated industrial protocols, OSPI, Profinet, Robotics, SD/SDIO, SPI, UART UART 6 CAN (#) 2 (CAN-FD) PWM (Ch) 20 TI functional safety category Functional Safety-Compliant Number of ADC channels 21 SPI 2, 4 USB USB 2.0 Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, CAN-FD, FSI, I2C, OSPI, SD/SDIO, SPI, UART Operating system BareMetal (No OS), FreeRTOS, ThreadX, Zephyr RTOS Hardware accelerators Trigonometric math accelerator Edge AI enabled Yes Number of GPIOs 140 Security Cryptographic acceleration, Device lifecycle management, Secure boot, Secure debug, Secure provisioning
NFBGA (ZCZ) 324 225 mm² 15 x 15 NFBGA (ZFG) 304 175.5625 mm² 13.25 x 13.25

Processor Cores:

  • Single and Dual Arm Cortex R5F CPU with each core running up to 500MHz
    • 16KB I-Cache with 64-bit ECC per CPU core
    • 16KB D-cache with 32-bit ECC per CPU core
    • 256KB Tightly Coupled Memory (TCM) with 32-bit ECC per core
    • Lockstep or Dual-core operation supported
  • Trigonometric Math Unit (TMU) for accelerating trigonometric functions
    • Up to 2x, one per R5F MCU core

Memory:

  • 1.5MB of On-Chip Shared RAM (OCSRAM):
    • 3 banks × 512KB
    • ECC error protection for full 1.5MB OCSRAM

    • Remote L2 Cache (RL2) for external memory, software programmable up to 256KB per CPU core

  • 2x Octal Serial Peripheral Interface (OSPI) up to 133MHz SDR and DDR
    • 1x with eXecute In Place (XIP) support

    • RAM expansion/Flash over the Air (FOTA)

  • General-Purpose Memory Controller (GPMC)
    • 16-bit parallel data bus with 22-bit address bus and 4 chip selects
    • Up to 4MB addressable memory space
    • Integrated Error Location Module (ELM) support for error checking

System on Chip (SoC) Services and Architecture:

  • 1x EDMA to support data movement functions
  • Device Boot supported from the following interfaces:
    • UART (Primary/Backup)

    • OSPI NOR and NAND Flash (50MHz SDR and 25MHz DDR) (Primary)

    • USB Peripheral boot
  • Interprocessor communication modules
    • SPINLOCK module for synchronizing processes running on multiple cores
    • MAILBOX functionality implemented through CTRLMMR registers
  • Central Platform Time Sync (CPTS) support with time-sync and compare-event interrupt routers
  • Timer Modules:
    • 2x Windowed Watchdog Timer (WWDT)
    • 4x Real Time Interrupt (RTI) timer

USB 2.0

  • Port configurable as USB host, USB device, or USB Dual-Role device
  • USB 2.0 Host mode
    • High-Speed (HS, 480Mbps)
    • Full-Speed (FS, 12Mbps)
    • Low-Speed (LS, 1.5Mbps)
  • USB 2.0 Device mode
    • High-Speed (HS, 480Mbps)
    • Full-Speed (FS, 12Mbps)

Industrial Connectivity:

  • 2x Programmable Real-time Unit – Industrial Communication Subsystem (PRU-ICSS)
    • Dual core Programmable Realtime Unit Subsystem (PRU0 / PRU1) per PRU-ICSS for 4 cores total
      • Deterministic hardware
      • Dynamic firmware
    • 20-channel enhanced input (eGPI) per PRU
    • 20-channel enhanced output (eGPO) per PRU
    • Embedded Peripherals and Memory
      • 1x UART, 1x ECAP, 1x MDIO, 1x IEP
      • 1x 32KB Shared General Purpose RAM
      • 2x 8KB Shared Data RAM
      • 1x 12KB IRAM per PRU
      • ScratchPad (SPAD), MAC/CRC
    • Digital encoder and sigma-delta control loops
    • The PRU-ICSS enables advanced industrial protocols including:
      • EtherCAT, Ethernet/IP™
      • PROFINET, IO-Link
    • Dedicated Interrupt Controller (INTC)
    • Dynamic CONTROLSS XBAR Integration

High Speed Interfaces

  • Integrated 3-port Gigabit Ethernet Switch (CPSW) supporting up to two external ports
    • Selectable MII (10/100), RMII (10/100), or RGMII (10/100/1000)
    • IEEE 1588 (2008 Annex D, Annex E, Annex F) with 802.1AS PTP
    • Clause 45 MDIO PHY management
    • 512x ALE engine based packet classifiers
    • Priority flow control with up to 2KB packet size
    • Four CPU hardware interrupt pacing
    • IP/ UDP/ TCP checksum offload in hardware
    • Time Sensitive Network (TSN) Support
    • Cut-thru switching and Interexpress Traffic (IET) support

General Connectivity:

  • 6x Universal Asynchronous RX-TX (UART)
  • 4x Serial Peripheral Interface (SPI) controllers
  • 3x Local Interconnect Network (LIN) ports
  • 3x Inter-Integrated Circuit (I2C) ports
  • 2x Modular Controller Area Network (MCAN) modules with CAN-FD support
  • 1x Fast Serial Interface Transmitter (FSITX)
  • 1x Fast Serial Interface Receiver (FSIRX)
  • Up to 141x General Purpose I/O (GPIO) pins

Sensing and Actuation:

  • Real-time Control Subsystem (CONTROLSS)
  • Flexible Input/Output Crossbars (XBAR)
  • 3x 12-bit Analog to Digital Converters (ADC) with 3 MSPS maximum sampling rate
    • Each ADC module with
      • 7x Single ended channels OR
      • 3x Differential channels
    • Highly configurable ADC digital logic
      • With selectable internal or external reference
      • 4x Post-Processing blocks for each ADC module
  • 9x Analog Comparators with internal 12-bit DAC reference (CMPSSA)
  • 1x 12 bit Digital to Analog Converter (DAC)
  • 10x Enhanced High Resolution Pulse Width Modulation (eHRPWM) modules
    • Single or Dual PWM channels
    • Advanced PWM Configurations
    • Enhanced HRPWM time resolution
  • 8x Enhanced Capture (ECAP) modules
  • 2x Enhanced Quadrature Encoder Pulse (EQEP) modules
  • 2x Sigma-Delta Filter Modules (SDFM)

Data Storage

  • 1 × 4-bit Multi-Media Card/Secure Digital (MMC/SD) interface

Security:

  • Hardware Security Module (HSM) with support for Auto SHE 1.1/EVITA
  • Targeted for ISO 21434 compliance
  • Secure boot support
    • Device Take Over Protection
    • Hardware enforced root-of-trust
    • Authenticated boot
    • SW Anti-rollback protection
  • Debug security
    • Secure device debug only after proper authentication
    • Ability to disable device debug functionality
  • Device ID and Key Management
    • Support for OTP Memory (FUSEROM)
      • Store root keys and other security fields
    • Separate EFUSE controllers and FUSE ROMs
    • Unique Device Public Identifiers
  • Memory Protection Units (MPU)
    • Dedicated Arm MPU per Cortex-R5F core
    • System MPU - present at various interfaces in the SoC (MPU or Firewall)
    • 8 to 16 Programmable Regions
      • Enable/Privilege ID
      • Start/End Address
      • Read/Write/Cachable
      • Secure/Non-Secure
  • Cryptographic acceleration
    • Cryptographic cores with DMA Support
    • AES - 128/192/256-bit key sizes
    • SHA2 - 256/384/512-bit support
    • DRBG with pseudo and true random number generator

Functional Safety:

  • Enables design of systems with functional safety requirements
    • Error Signaling Module (ESM)
    • ECC or parity on calculation critical memories
    • Built-In Self-Test (BIST) on-chip RAM
    • Runtime internal diagnostic modules including voltage, temperature, and clock monitoring, windowed watchdog timers, CRC engines for memory integrity checks
  • Functional Safety-Compliant [Industrial]
    • Developed for functional safety applications
    • Documentation to be made available to aid IEC 61508 functional safety system design
    • Systematic capability up to SIL-3
    • Hardware integrity up to SIL-3
    • Safety-related certification
      • IEC 61508 certified
  • Functional Safety-Compliant [Automotive]
    • Developed for functional safety applications
    • Documentation to be made available to aid ISO 26262 functional safety system design
    • Systematic capability up to ASIL-D
    • Hardware integrity up to ASIL-D
    • Safety-related certification
      • ISO 26262 certified

Technology / Package:

  • AEC-Q100 qualified for automotive applications
  • ZCZ Package
    • 324-pin NFBGAs
    • 15.00mm × 15.00mm
    • 0.8mm pitch
  • ZFG Package
    • 304-pin NFBGA
    • 13.25mm × 13.25mm
    • 0.65mm pitch
  • ZEJ Package
    • 256-pin NFBGA
    • 13.00mm × 13.00mm
    • 0.8mm pitch
  • ZNC Package
    • 293-pin NFBGA
    • 10.00mm × 10.00mm
    • 0.5mm pitch

Processor Cores:

  • Single and Dual Arm Cortex R5F CPU with each core running up to 500MHz
    • 16KB I-Cache with 64-bit ECC per CPU core
    • 16KB D-cache with 32-bit ECC per CPU core
    • 256KB Tightly Coupled Memory (TCM) with 32-bit ECC per core
    • Lockstep or Dual-core operation supported
  • Trigonometric Math Unit (TMU) for accelerating trigonometric functions
    • Up to 2x, one per R5F MCU core

Memory:

  • 1.5MB of On-Chip Shared RAM (OCSRAM):
    • 3 banks × 512KB
    • ECC error protection for full 1.5MB OCSRAM

    • Remote L2 Cache (RL2) for external memory, software programmable up to 256KB per CPU core

  • 2x Octal Serial Peripheral Interface (OSPI) up to 133MHz SDR and DDR
    • 1x with eXecute In Place (XIP) support

    • RAM expansion/Flash over the Air (FOTA)

  • General-Purpose Memory Controller (GPMC)
    • 16-bit parallel data bus with 22-bit address bus and 4 chip selects
    • Up to 4MB addressable memory space
    • Integrated Error Location Module (ELM) support for error checking

System on Chip (SoC) Services and Architecture:

  • 1x EDMA to support data movement functions
  • Device Boot supported from the following interfaces:
    • UART (Primary/Backup)

    • OSPI NOR and NAND Flash (50MHz SDR and 25MHz DDR) (Primary)

    • USB Peripheral boot
  • Interprocessor communication modules
    • SPINLOCK module for synchronizing processes running on multiple cores
    • MAILBOX functionality implemented through CTRLMMR registers
  • Central Platform Time Sync (CPTS) support with time-sync and compare-event interrupt routers
  • Timer Modules:
    • 2x Windowed Watchdog Timer (WWDT)
    • 4x Real Time Interrupt (RTI) timer

USB 2.0

  • Port configurable as USB host, USB device, or USB Dual-Role device
  • USB 2.0 Host mode
    • High-Speed (HS, 480Mbps)
    • Full-Speed (FS, 12Mbps)
    • Low-Speed (LS, 1.5Mbps)
  • USB 2.0 Device mode
    • High-Speed (HS, 480Mbps)
    • Full-Speed (FS, 12Mbps)

Industrial Connectivity:

  • 2x Programmable Real-time Unit – Industrial Communication Subsystem (PRU-ICSS)
    • Dual core Programmable Realtime Unit Subsystem (PRU0 / PRU1) per PRU-ICSS for 4 cores total
      • Deterministic hardware
      • Dynamic firmware
    • 20-channel enhanced input (eGPI) per PRU
    • 20-channel enhanced output (eGPO) per PRU
    • Embedded Peripherals and Memory
      • 1x UART, 1x ECAP, 1x MDIO, 1x IEP
      • 1x 32KB Shared General Purpose RAM
      • 2x 8KB Shared Data RAM
      • 1x 12KB IRAM per PRU
      • ScratchPad (SPAD), MAC/CRC
    • Digital encoder and sigma-delta control loops
    • The PRU-ICSS enables advanced industrial protocols including:
      • EtherCAT, Ethernet/IP™
      • PROFINET, IO-Link
    • Dedicated Interrupt Controller (INTC)
    • Dynamic CONTROLSS XBAR Integration

High Speed Interfaces

  • Integrated 3-port Gigabit Ethernet Switch (CPSW) supporting up to two external ports
    • Selectable MII (10/100), RMII (10/100), or RGMII (10/100/1000)
    • IEEE 1588 (2008 Annex D, Annex E, Annex F) with 802.1AS PTP
    • Clause 45 MDIO PHY management
    • 512x ALE engine based packet classifiers
    • Priority flow control with up to 2KB packet size
    • Four CPU hardware interrupt pacing
    • IP/ UDP/ TCP checksum offload in hardware
    • Time Sensitive Network (TSN) Support
    • Cut-thru switching and Interexpress Traffic (IET) support

General Connectivity:

  • 6x Universal Asynchronous RX-TX (UART)
  • 4x Serial Peripheral Interface (SPI) controllers
  • 3x Local Interconnect Network (LIN) ports
  • 3x Inter-Integrated Circuit (I2C) ports
  • 2x Modular Controller Area Network (MCAN) modules with CAN-FD support
  • 1x Fast Serial Interface Transmitter (FSITX)
  • 1x Fast Serial Interface Receiver (FSIRX)
  • Up to 141x General Purpose I/O (GPIO) pins

Sensing and Actuation:

  • Real-time Control Subsystem (CONTROLSS)
  • Flexible Input/Output Crossbars (XBAR)
  • 3x 12-bit Analog to Digital Converters (ADC) with 3 MSPS maximum sampling rate
    • Each ADC module with
      • 7x Single ended channels OR
      • 3x Differential channels
    • Highly configurable ADC digital logic
      • With selectable internal or external reference
      • 4x Post-Processing blocks for each ADC module
  • 9x Analog Comparators with internal 12-bit DAC reference (CMPSSA)
  • 1x 12 bit Digital to Analog Converter (DAC)
  • 10x Enhanced High Resolution Pulse Width Modulation (eHRPWM) modules
    • Single or Dual PWM channels
    • Advanced PWM Configurations
    • Enhanced HRPWM time resolution
  • 8x Enhanced Capture (ECAP) modules
  • 2x Enhanced Quadrature Encoder Pulse (EQEP) modules
  • 2x Sigma-Delta Filter Modules (SDFM)

Data Storage

  • 1 × 4-bit Multi-Media Card/Secure Digital (MMC/SD) interface

Security:

  • Hardware Security Module (HSM) with support for Auto SHE 1.1/EVITA
  • Targeted for ISO 21434 compliance
  • Secure boot support
    • Device Take Over Protection
    • Hardware enforced root-of-trust
    • Authenticated boot
    • SW Anti-rollback protection
  • Debug security
    • Secure device debug only after proper authentication
    • Ability to disable device debug functionality
  • Device ID and Key Management
    • Support for OTP Memory (FUSEROM)
      • Store root keys and other security fields
    • Separate EFUSE controllers and FUSE ROMs
    • Unique Device Public Identifiers
  • Memory Protection Units (MPU)
    • Dedicated Arm MPU per Cortex-R5F core
    • System MPU - present at various interfaces in the SoC (MPU or Firewall)
    • 8 to 16 Programmable Regions
      • Enable/Privilege ID
      • Start/End Address
      • Read/Write/Cachable
      • Secure/Non-Secure
  • Cryptographic acceleration
    • Cryptographic cores with DMA Support
    • AES - 128/192/256-bit key sizes
    • SHA2 - 256/384/512-bit support
    • DRBG with pseudo and true random number generator

Functional Safety:

  • Enables design of systems with functional safety requirements
    • Error Signaling Module (ESM)
    • ECC or parity on calculation critical memories
    • Built-In Self-Test (BIST) on-chip RAM
    • Runtime internal diagnostic modules including voltage, temperature, and clock monitoring, windowed watchdog timers, CRC engines for memory integrity checks
  • Functional Safety-Compliant [Industrial]
    • Developed for functional safety applications
    • Documentation to be made available to aid IEC 61508 functional safety system design
    • Systematic capability up to SIL-3
    • Hardware integrity up to SIL-3
    • Safety-related certification
      • IEC 61508 certified
  • Functional Safety-Compliant [Automotive]
    • Developed for functional safety applications
    • Documentation to be made available to aid ISO 26262 functional safety system design
    • Systematic capability up to ASIL-D
    • Hardware integrity up to ASIL-D
    • Safety-related certification
      • ISO 26262 certified

Technology / Package:

  • AEC-Q100 qualified for automotive applications
  • ZCZ Package
    • 324-pin NFBGAs
    • 15.00mm × 15.00mm
    • 0.8mm pitch
  • ZFG Package
    • 304-pin NFBGA
    • 13.25mm × 13.25mm
    • 0.65mm pitch
  • ZEJ Package
    • 256-pin NFBGA
    • 13.00mm × 13.00mm
    • 0.8mm pitch
  • ZNC Package
    • 293-pin NFBGA
    • 10.00mm × 10.00mm
    • 0.5mm pitch

The AM261x Sitara Arm Microcontrollers are part of Sitara AM26x real-time MCU families designed to meet the complex real-time processing needs of next generation industrial and automotive embedded products. With scalable Arm Cortex R5F performance and an extensive set of peripherals, AM261x device is designed for a broad range of applications while offering safety features and optimized peripherals for real time control.

Key features and benefits:

  • Peripherals supporting system level connectivity such as Gigabit Ethernet, USB, OSPI/QSPI, CAN, UARTs, SPI and GPIOs.
  • Granular firewalls managed by Hardware Security Manager (HSM) enable developers to implement stringent security minded system design requirements.
  • Up to two R5F cores in cluster with 256KB of shared Tightly Coupled Memory (TCM) per core along with 1.5MB of shared SRAM, greatly reducing the need for external memory.

The AM261x Sitara Arm Microcontrollers are part of Sitara AM26x real-time MCU families designed to meet the complex real-time processing needs of next generation industrial and automotive embedded products. With scalable Arm Cortex R5F performance and an extensive set of peripherals, AM261x device is designed for a broad range of applications while offering safety features and optimized peripherals for real time control.

Key features and benefits:

  • Peripherals supporting system level connectivity such as Gigabit Ethernet, USB, OSPI/QSPI, CAN, UARTs, SPI and GPIOs.
  • Granular firewalls managed by Hardware Security Manager (HSM) enable developers to implement stringent security minded system design requirements.
  • Up to two R5F cores in cluster with 256KB of shared Tightly Coupled Memory (TCM) per core along with 1.5MB of shared SRAM, greatly reducing the need for external memory.
filter Buscar otro/a Real-time motor control & automation MCUs
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 21
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet AM261x Sitara™ Microcontrollers datasheet (Rev. C) PDF | HTML 09 jul 2025
* Errata AM261x Errata Document (Rev. A) PDF | HTML 29 abr 2025
* User guide AM261x Sitara Microcontrollers Technical Reference Manual (Rev. B) PDF | HTML 01 jul 2025
* User guide AM261x Sitara Microcontrollers Register Addendum (Rev. A) 25 abr 2025
Application brief Next-Gen Industrial Monitoring: AI-Driven Communication and Fault Prevention PDF | HTML 26 feb 2026
Application note AM26 Ethercat SubDevice with TwinCat PDF | HTML 10 dic 2025
White paper Integrating EVCC, DCDC, and Host Architecture: TI Automotive MCUs for Next-Generation EV Charging (Rev. A) PDF | HTML 13 nov 2025
Application note Implementing USB True Host Detection on AM261x PDF | HTML 30 sep 2025
Application note AM261x Power Estimation Tool PDF | HTML 11 jul 2025
Functional safety information AM261 TÜV SÜD Functional Safety Certificate 10 jul 2025
Functional safety information AM261 TÜV SÜD Functional Safety Certificate Report 10 jul 2025
Product overview AM26xx Family TIFS-SDK Product Brief PDF | HTML 29 may 2025
Application note AM26x Custom PCB System Getting Started Guide (Rev. A) PDF | HTML 13 may 2025
White paper AM261x 和 AM263Px 使用的工业通信协议 PDF | HTML 12 may 2025
User guide AM26x Hardware Design Guidelines (Rev. D) PDF | HTML 02 may 2025
Application note How to Synchronize the Timing Between Chips With Programmable Real-Time Unit PDF | HTML 10 mar 2025
White paper Leveraging USB Capabilities on the AM261x Microcontrollers PDF | HTML 28 ene 2025
Application note Microcontroller Abstraction Layer on Jacinto™ and Sitara™ Embedded Processors PDF | HTML 28 ene 2025
Application note AM26x Family Migration Overview (Rev. A) PDF | HTML 15 nov 2024
Application brief Achieving Faster Secure Boot Time on AM26x Devices PDF | HTML 13 nov 2024
User guide AM261x OSPI, QSPI Flash Selection Guide PDF | HTML 19 sep 2024

Diseño y desarrollo

Soluciones de alimentación

Busque las soluciones de alimentación disponibles para el AM2612. TI ofrece soluciones de alimentación para sistemas en chip (SoC), procesadores, microcontroladores, sensores y matrices de compuertas programables de campo (FPGA), sean o no de TI.

Ver soluciones
Placa de evaluación

AM261-SOM-EVM — Módulo de evaluación del sistema en módulo (SOM) AM261x

AM261-SOM-EVM es una placa de evaluación y desarrollo para la serie de microcontroladores (MCU) Sitara™ AM261x de Texas Instruments. El diseño del sistema en módulo con tres conectores de alta velocidad y alta densidad de 120 pines es una excelente opción para la evaluación inicial y la creación (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

DP83826-EVM-AM2 — Módulo de evaluación AM2x para placa complementaria de PHY Ethernet para automoción

El DP83826-EVM-AM2 es una placa complementaria para PHY Ethernet industrial para usarse con los módulos de evaluación de los microcontroladores Sitara™ de alto rendimiento de la serie AM2x. Esta placa complementaria es ideal para la evaluación inicial de Ethernet y la creación de prototipos con (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

DP83TG720-EVM-AM2 — Módulo de evaluación AM2x para placa complementaria de Ethernet PHY para automoción

DP83TG720-EVM-AM2 es una placa complementaria de Ethernet PHY para automoción que se usa con los módulos de evaluación de microcontroladores de alto rendimiento Sitara™ de la serie AM2x. Esta placa complementaria es ideal para la evaluación inicial de Ethernet y la creación de prototipos con EVM (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

LP-AM261 — Kit de desarrollo LaunchPad™ AM261x MCU de uso general basado en Arm®

El kit de desarrollo LaunchPad™ AM261x es un módulo de evaluación de hardware (EVM) sencillo y económico para la serie de microcontroladores (MCU) Sitara™ AM261x de Texas Instruments™. Este EVM proporciona una forma sencilla de empezar a desarrollar en los MCU AM261x con emulación integrada para (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Placa de evaluación

TIPA-050074 — Diseño de fuente de alimentación de AM261x que utiliza TPS653860-Q1 para aplicaciones de segurida

Este diseño de potencia puede utilizarse como guía para integrar el CI de administración de potencia (PMIC) TPS65386x-Q1 en sistemas automotrices de seguridad que alimentan el microcontrolador (MCU) funcional de seguridad (FuSa) AM261x Sitara™.

View Options
Sonda de depuración

TMDSEMU110-U — Sonda de depuración XDS110 JTAG

El XDS110 de Texas Instruments es una nueva clase de sonda de depuración (emulador) para procesadores integrados de TI. El XDS110 sustituye a la familia XDS100, al tiempo que es compatible con una mayor variedad de estándares (IEEE1149.1, IEEE1149.7, SWD) en un único pod. Todas las sondas de (...)

Guía del usuario: PDF
No disponible en TI.com
Sonda de depuración

TMDSEMU560V2STM-U — Sonda de depuración USB de seguimiento del sistema XDS560v2

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).  Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

No disponible en TI.com
Sonda de depuración

TMDSEMU560V2STM-UE — Sonda de depuración USB y ethernet de seguimiento del sistema XDS560v2

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

No disponible en TI.com
Sonda de depuración

LB-3P-TRACE32-ARM — Sistema de depuración y seguimiento Lauterbach TRACE32 para microcontroladores y procesadores basado

Lauterbach‘s TRACE32® tools are a suite of leading-edge hardware and software components that enables developers to analyze, optimize and certify all kinds of Arm®-based microcontrollers and processors. The globally renowned debug and trace solutions for embedded systems and SoCs are the perfect (...)

Desde: Lauterbach GmbH
View Options
Herramienta de programación de hardware

SOFTM-3P-FLASHRUNNER-2-0 — Herramientas de programación FlashRunner 2.0 8CH y FlashRunner 2.0 16CH de SMH Technologies

FlashRunner 2.0 is a universal, In-System Programming solution (ISP) available in 4 configurations: 4,8,12 and 16 channels which allows to program upto 16 targets - even different each other - in parallel (32 targets using the Demultiplexer tool). The new GRAPHICAL USER INTERFACE (Workbench) cuts (...)

Desde: SMH Technologies
Visitar el sitio del socio
Herramienta de programación de hardware

SOFTM-3P-FLASHRUNNER-HS — Herramienta de programación de alta velocidad FlashRunner de tecnologías SMH

FlashRunner HS es un sistema de programación multiextremo. Las funciones típicas del sistema de programación se comparten entre una unidad de control central y hasta 8 módulos activos periféricos conectados a través de un cable USB tipo C. La nueva interfaz gráfica de usuario (GUI) WorkBench reduce (...)

Desde: SMH Technologies
Visitar el sitio del socio
Herramienta de programación de hardware

SOFTM-3P-FLASHRUNNER-NXG — Herramienta de programación de última generación FlashRunner LAN 2.0 de SMH Technologies

El FlashRunner LAN2.0 NeXt Generation es una solución de programación en el sistema (ISP) universal disponible en versiones de 1 a 4 canales paralelos. Gracias a una simple sesión remota, es posible habilitar otros canales (desde 2 hasta 4). El FlashRunner LAN2.0 NXG está diseñado para integrarse (...)

Desde: SMH Technologies
Visitar el sitio del socio
Kit de desarrollo de software (SDK)

AM261X-MCAL-SDK — Microcontroller Abstraction Layer (MCAL) and Complex Device Drivers (CDD) for AM261X

The AM261x microcontroller (MCU) plus software development kit (SDK) is a unified software platform for embedded processors providing easy setup and fast out-of-the-box access to examples, benchmarks and demonstrations. This software accelerates application development schedules by eliminating (...)

Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Kit de desarrollo de software (SDK)

AM261X-TIFS-SDK — AM261x foundational security software

The AM261x microcontroller (MCU) plus software development kit (SDK) is a unified software platform for embedded processors providing easy setup and fast out-of-the-box access to examples, benchmarks and demonstrations. This software accelerates application development schedules by eliminating (...)

Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
Kit de desarrollo de software (SDK)

INDUSTRIAL-COMMUNICATIONS-SDK-AM261X — Industrial Communications SDK for AM261x

This software development kit (SDK) includes real-time industrial communication protocols (EtherCAT, EtherNet/IP, PROFINET, IO-Link, etc.) on TI processors. It also has PRU-ICSS firmware, drivers, communication stack libraries, and application examples, along with documentation.

What's new:

  • (...)
Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

MCU-PLUS-SDK-AM261X — MCU+ SDK for AM261x - RTOS, No-RTOS

The AM261x microcontroller (MCU) plus software development kit (SDK) is a unified software platform for embedded processors providing easy setup and fast out-of-the-box access to examples, benchmarks and demonstrations. This software accelerates application development schedules by eliminating (...)

Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Kit de desarrollo de software (SDK)

MOTOR-CONTROL-SDK-AM261X — Motor Control SDK for AM261x

The AM261x microcontroller (MCU) plus software development kit (SDK) is a unified software platform for embedded processors providing easy setup and fast out-of-the-box access to examples, benchmarks and demonstrations. This software accelerates application development schedules by eliminating (...)

Productos y hardware compatibles

Productos y hardware compatibles
Examinar Opciones de descarga
Software de aplicación y estructura

AM261X-RESTRICTED-SAFETY — AM261x restricted functional safety content

AM261x restricted functional safety content
Productos y hardware compatibles

Productos y hardware compatibles
Solicitar
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Opciones de descarga
Capacitación en línea

AM26X-ACADEMY — AM26x Academy

AM26x Academy features easy-to-use training modules ranging from the basics of getting started to advanced development topics.
Productos y hardware compatibles

Productos y hardware compatibles
Examinar
Soporte de software

MATHW-3P-AM26X-EC — Paquete de soporte de codificador integrado MCU AM26x de Texas Instruments

TI ofrece un flujo de trabajo de diseño basado en modelos para una variedad de placas de evaluación y dispositivos AM26x.

El paquete de soporte de Embedded Coder® para las placas AM26x controlCARD y LaunchPad le permite crear, cargar y ejecutar automáticamente algoritmos en dispositivos AM26x (...)
Desde: MathWorks, Inc.
View Options
Modelo de simulación

AM2612 BSDL Model (Rev. A)

SPRM875A.ZIP (17 KB) - BSDL Model
Descargar
Modelo de simulación

AM2612 IBIS Model (Rev. A)

SPRM874A.ZIP (6383 KB) - IBIS Model
Descargar
Modelo de simulación

AM2612 Thermal Model (Rev. A)

SPRM873A.ZIP (5 KB) - Thermal Model
Descargar
Herramienta de cálculo

AM261X-PET-CALC — AM261x Power Estimation Tool

Power Estimation Tool for AM261x Family of Devices. This tool can be used to provide a general estimate of the expected device power consumption for common applications.
Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Diseños de referencia

TIDA-011002 — Cost effective IO-Link Master module reference design

This reference design accelerates the development of IO-Link controller gateways by implementing an 8- port IO-Link gateway that supports up to 400μs cycle time, COM3, 1A per port on L+, and an additional DI/DO. The design supports various Ethernet-based industrial protocols such as EtherCAT®, (...)
Design guide: PDF
Diseños de referencia

TIDA-010973 — Diseño de referencia de módulo de com. ethernet industrial de 100Mbps para aplicaciones multiprotoco

Este diseño de referencia acelera el desarrollo de nodos ethernet industriales multiprotocolo de 100 Mbps. El diseño permite que los ingenieros creen prototipos y desplieguen rápidamente EtherCAT®, PROFINET®, EtherNet/IP y Protocolo de control de transmisión (TCP) Modbus® en el AM261x con el (...)
Design guide: PDF
Diseños de referencia

TIDA-010979 — Control de motor articulado para robot de 48 V y 1 kW con diseño de ref. de comunicación industrial

Este diseño de referencia incluye dispositivos MCU-AM261x Sitara™ de TI que controlan un motor conectado a una red Ethernet industrial. El diseño utiliza una placa de circuito impreso (PCB) de 70 mm de diámetro para accionar una articulación de robot humanoide (motor Eyoubot de 48 V y 1 kW). El (...)
Design guide: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
NFBGA (ZCZ) 324 Ultra Librarian
NFBGA (ZFG) 304 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos