IWR6843AOPEVM

IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

IWR6843AOPEVM

Order now

Overview

The IWR6843 antenna-on-package (AoP) evaluation module (EVM) is an easy-to-use 60-GHz mmWave sensor evaluation platform used to evaluate the IWR6843AOP product, which integrates a wide field-of-view (FoV) antenna. This EVM enables access to point-cloud data and power over a USB interface.

This kit is supported by mmWave tools and software, including mmWave Studio (MMWAVE-STUDIO) and the mmWave software development kit (MMWAVE-SDK).

Additional boards may be used to enable additional functionality. For example, DCA1000EVM enables access to sensor raw data via a low-voltage differential signal (LVDS) interface. MMWAVEICBOOST enables software development and trace capabilities via Code Composer Studio™ (CCS) integrated studio environment (CCSTUDIO). IWR6843AOPEVM paired with MMWAVEICBOOST can interface with the MCU LaunchPad™ development kit ecosystem.

Features

60-GHz to 64-GHz mmWave sensor
4 receive (RX) 3 transmit (TX) antenna with 120° azimuth field of view (FoV) and 120° elevation FoV
Direct interface with MMWAVEICBOOST and DCA1000
Supports 60-pin high-speed interface for host-controlling interface
Onboard capability for power-consumption monitoring

IWR6843AOPEVM
Mounting stand
Plain washers
Pan-head screws
USB type-A male to micro-B male cable (3 ft)
Quick start guide
Warranty card (disclaimer sheet)

Industrial mmWave radar sensors

IWR6843AOP — Single-chip 60-GHz to 64-GHz intelligent mmWave sensor with integrated antenna on package (AoP)

Linear & low-dropout (LDO) regulators

TPS7A53-Q1 — Automotive 3-A, low-VIN (1.1-V), low-noise, high-accuracy, ultra-low-dropout (LDO) voltage regulator

Load switches

TPS22918-Q1 — 1-ch, 5.5-V, 2-A, 52-mΩ automotive load switch with adj. rise time and adj. output discharg

Multi-channel ICs (PMIC)

LP87702 — Dual buck converter and 5-V boost with diagnostic functions for industrial radar

LP87702-Q1 — Dual buck converter and 5-V boost with diagnostic functions

Order & start development

Explore packages of hardware, software and documentation

Get started with data collection on IWR6843AOP for RF performance evaluation

See required hardware, software, and tools to capture raw ADC data from IWR6843AOP senor to enable you to evaluate RF performance and start algorithm development.

Evaluation board

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

Required

Why do I need this?

This easy-to-use hardware module for single-chip, antenna-on-package IWR6843AOP mmWave sensing device allows you to evaluate RF functionality or performance and start application code development immediately.

In stock

Limit: 50

Evaluation board

DCA1000EVM – Real-time data-capture adapter for radar sensing evaluation module

Required

Why do I need this?

This hardware connects to IWR6843AOPEVM to enable streaming of LVDS interface to PC Ethernet interface. The streaming capability allows you to capture ADC raw data for analysis on the PC.

In stock

Limit: 10

IDE, configuration, compiler or debugger

MMWAVE-STUDIO – mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

Version: 2.01.01

Release date: 07-MAY-2020

Required

Why do I need this?

This is a PC GUI that works with the IWR6843AOPEVM and DCA1000EVM to configure RF operation such as waveform design, and capture raw ADC data to a file which then allows you to use that file to analyze RF performance and for PC algorithm development.

Download options

IDE, configuration, compiler or debugger

MMWAVE-SENSING-ESTIMATOR-CLOUD – mmWave sensing estimator cloud development on TI Resource Explorer

Required

Why do I need this?

This interactive visualization application in the cloud allows you to explore mmWave system-level performance analysis and trade-offs as well as analyze chirp waveform designs.

Start evaluation

HARDWARE AND SOFTWARE PACKAGE

Get started with data collection on IWR6843AOP for RF performance evaluation

View package

Get started with running application demos on IWR16843AOP

Explore mmWave sensor capabilities of IWR6843AOP by running various application demonstration examples using a PC GUI and EVM.

Evaluation board

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

Required

Why do I need this?

In stock

Limit: 50

IDE, configuration, compiler or debugger

MMWAVE-DEMO-VISUALIZER-CLOUD – mmWave demo visualizer cloud development on TI Resource Explorer

Required

Why do I need this?

This interactive PC GUI interface in the cloud allows you configure sensor operation and visualize real-time sensor outputs including point clouds and heat maps. You need to run out-of-box demonstration application flashed on the IWR6843AOPEVM as part of the interface.

Start evaluation

IDE, configuration, compiler or debugger

MMWAVE-SENSING-ESTIMATOR-CLOUD – mmWave sensing estimator cloud development on TI Resource Explorer

Required

Why do I need this?

This interactive visualization application in the cloud allows you to explore mmWave system-level performance analysis and trade-offs as well as analyze chirp waveform designs.

Start evaluation

Software programming tool

UNIFLASH – UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

Version: v6.2.0

Release date: 26-Jan-2020

Required if

Needing additional end equipment demonstration applications.

Why do I need this?

This software tool allows you to update and change the flashed image on the IWR6843AOPEVM. In addition, it allows you to evaluate other end equipment demonstration applications provided by the industrial toolbox.

Download options

Software development kit (SDK)

MMWAVE-INDUSTRIAL-TOOLBOX-CLOUD – mmWave industrial toolbox cloud development with software examples and demos on TI Resource Explorer

Required if

Needing to leverage additional mmWave examples, laboratories, and end-equipment demos as a starting point.

Why do I need this?

These open-source software examples and documentation provide a repository of additional industrial-related end equipment applications using the IWR1642BOOST and a PC GUI, and allows you to use them as a starting point for your application development.

Start evaluation

HARDWARE AND SOFTWARE PACKAGE

Get started with running application demos on IWR16843AOP

View package

Develop your application on IWR6843AOP

See required software and hardware to start developing your application code on IWR6843AOP.

Evaluation board

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

Required

Why do I need this?

In stock

Limit: 50

Evaluation board

MMWAVEICBOOST – mmWave sensors carrier card platform

Required

Why do I need this?

This hardware board enables you to plug in the module IWR6843AOPEVM for software development and debug. This board includes additional interfaces used for Code Composer Studio IDE (CCS) connectivity and LaunchPad connectivity.

In stock

Limit: 50

Evaluation board

MMWAVEPOEEVM – mmWave sensor power-over-ethernet (PoE) evaluation module

Required if

Development board adding Ethernet and POE capabilities.

Why do I need this?

This hardware board provides data and Power-over-Ethernet connectivity to mmWave evaluation modules for remote sensing applications.

In stock

Limit: 50

IDE, configuration, compiler or debugger

CCSTUDIO – Code Composer Studio integrated development environment (IDE)

Required

Why do I need this?

This IDE enables you to perform code development on all mmWave devices, and includes OS support for Windows, Linux, and Mac installers.

Download options

Software development kit (SDK)

MMWAVE-SDK – mmWave software development kit (SDK)

Version: 3.05.00.04

Release date: 02-OCT-2020

Required

Why do I need this?

This software is a foundational software for all mmWave devices that serves as a starting point for your application development.

Download options

Software programming tool

UNIFLASH – UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

Version: v6.2.0

Release date: 26-Jan-2020

Required

Why do I need this?

This software tool allows you to update and change the flashed image on the IWR6843AOPEVM so you can run user developed or modified software.

Download options

IDE, configuration, compiler or debugger

MMWAVE-DEMO-VISUALIZER-CLOUD – mmWave demo visualizer cloud development on TI Resource Explorer

Required if

Needing to leverage TI's PC OOB GUI and modify.

Why do I need this?

This interactive GUI in the cloud provides the PC interface associated with the SDK out-of-box demonstration Java script application, which then allows you to use as a reference to modify your demonstration or prototypying.

Start evaluation

Software development kit (SDK)

MMWAVE-INDUSTRIAL-TOOLBOX-CLOUD – mmWave industrial toolbox cloud development with software examples and demos on TI Resource Explorer

Required if

Needing to leverage additional mmWave examples, laboratories, and end-equipment demos as a starting point.

Why do I need this?

Start evaluation

Evaluation board

DCA1000EVM – Real-time data-capture adapter for radar sensing evaluation module

Required if

Needing to evaluate LVDS instrumentation capabilities.

Why do I need this?

This hardware connects to IWR6843AOPEVM to enable streaming of LVDS interface to PC Ethernet interface. The streaming capability allows you to capture ADC raw data for analysis on the PC.

In stock

Limit: 10

IDE, configuration, compiler or debugger

MMWAVE-STUDIO – mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

Version: 2.01.01

Release date: 07-MAY-2020

Required if

Needing to evaluate LVDS instrumentation capabilities.

Why do I need this?

This software includes a PC software package that can be used with DCA1000EVM and IWR6843AOPEVM, which allows you to control and capture LVDS application-specific instrumentation data on the PC for analysis.

Download options

Software development kit (SDK)

MMWAVE-SECDEV – mmWave software secure development

Version: 2.00.00.01

Release date: 23-May-2018

Required if

Developing on high-secure mmWave devices.

Why do I need this?

This software tool is used for secure variants of IWR6843AOP device. It provides you neccesarily programming on your device keys, as well as reference tools for you to create secure application binaries.

Request

HARDWARE AND SOFTWARE PACKAGE

Develop your application on IWR6843AOP

View package

Order this hardware only

Evaluation board

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

In stock

Limit: 50

TI's Standard Terms and Conditions for Evaluation Items apply.

Design files

xWR6843AOPEVM Schematic Drawing, Assembly Drawing, and Bill of Materials (Rev. A) — SWRR166A.ZIP (9419 KB)

xWR6843AOPEVM Altium Design Files, Fabrication & Assembly Package (Rev. F) — SPRR418.ZIP (18053 KB)

Technical documentation

star

= Top documentation selected by TI

No results found. Please clear your search and try again.

View all 8

	Type	Title	Date
*	User guide	60GHz mmWave Sensor EVMs (Rev. D)	Dec. 04, 2020
	Certificate	IWR6843AOPEVM Declaration of Conformity (DoC)	Mar. 01, 2021
	Data sheet	IWR6843AOP Single-Chip 60- to 64-GHz mmWave Sensor Antennas-On-Package (AOP) datasheet (Rev. A)	Feb. 24, 2021
	White paper	How antenna-on-package design simplifies mmWave sensing in buildings and factori (Rev. A)	Apr. 28, 2020
	User guide	IWR6843AOP evaluation module features and interface	Nov. 06, 2019
	Certificate	IWR6843AOPEVM EU Declaration of Conformity (DoC) (Rev. A)	Sep. 20, 2019
	Technical article	Driving industrial innovation with small-size sensors	Sep. 12, 2019
	Technical article	Non-contact and private stance detection with TI mmWave sensors	Sep. 03, 2019

Related design resources

Hardware development

EVALUATION BOARD

DCA1000EVM — Real-time data-capture adapter for radar sensing evaluation module

IWR6843ISK — IWR6843 intelligent mmWave sensor standard antenna plug-in module

IWR6843ISK-ODS — IWR6843 intelligent mmWave overhead detection sensor (ODS) antenna plug-in module

MMWAVEICBOOST — mmWave sensors carrier card platform

Software development

SOFTWARE DEVELOPMENT KIT (SDK)

MMWAVE-SDK — mmWave software development kit (SDK)

IDE, CONFIGURATION, COMPILER OR DEBUGGER

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

MMWAVE-STUDIO — mmWave studio

SYSCONFIG — System configuration tool

SOFTWARE PROGRAMMING TOOL

UNIFLASH — UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support.

Training series

View all TI training and videos

Videos

Download options

Software programming tool

UNIFLASH
UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

Version: 6.4.0

Release date: 03 Aug 2021

UNIFLASH INSTALLERS

download

Windows Installer for UniFlash (155283 K)

download

macOS Installer for UniFlash (126735 K)

download

Linux Installer for UniFlash (142887 K)

download

Release archive

Release notes | Previous versions | Documentation | Supported products & hardware

Download options

IDE, configuration, compiler or debugger

MMWAVE-STUDIO
mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

Version: 02.01.01.00

Release date: 07 May 2020

MMWAVE STUDIO INSTALLER

lock

mmwave_studio_02_01_01_00_win32.exe (226328 K)

MD5 CHECKSUM

download

md5sum.txt

lock

= Requires export approval (1 minute)

Release notes | Previous versions | Documentation | Supported products & hardware

Download options

Software development kit (SDK)

MMWAVE-SDK
mmWave software development kit (SDK)

Version: 03.05.00.04

Release date: 07 Jan 2021

MMWAVE SDK INSTALLERS

download

mmwave_sdk_Windows-x86-Install.exe (478240 K)

download

mmwave_sdk_Linux-x86-Install.bin (478240 K)

EXPLORE IN THE CLOUD

cloud

mmWave Demo Visualizer

download

DCA1000platform CLI Utility

MD5 CHECKSUM

download

md5sum.txt (9 K)

Release notes | Previous versions | Documentation | Supported products & hardware

Download options

IDE, configuration, compiler or debugger

CCSTUDIO
Code Composer Studio integrated development environment (IDE)

Version: 10.4.0.00006

Release date: 07 Jul 2021

SINGLE FILE INSTALLERS

download

Windows single file installer for CCS IDE (1213401 K)

download

Linux single file installer for CCS IDE (1144057 K)

download

macOS single file installer for CCS IDE (1094756 K)

ON-DEMAND INSTALLERS

download

Windows on-demand installer for CCS IDE (39207 K)

download

Linux on-demand installer for CCS IDE (24750 K)

download

macOS on-demand installer for CCS IDE (34059 K)

EXPLORE IN THE CLOUD

cloud

TI Resource Explorer

Release notes | Previous versions | Documentation | Supported products & hardware

IWR6843AOPEVM

IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

IWR6843AOPEVM

Overview

Features

Industrial mmWave radar sensors

Linear & low-dropout (LDO) regulators

Load switches

Multi-channel ICs (PMIC)

Order & start development

Explore packages of hardware, software and documentation

Get started with data collection on IWR6843AOP for RF performance evaluation

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

DCA1000EVM – Real-time data-capture adapter for radar sensing evaluation module

MMWAVE-STUDIO – mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

MMWAVE-SENSING-ESTIMATOR-CLOUD – mmWave sensing estimator cloud development on TI Resource Explorer

Get started with data collection on IWR6843AOP for RF performance evaluation

Get started with running application demos on IWR16843AOP

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

MMWAVE-DEMO-VISUALIZER-CLOUD – mmWave demo visualizer cloud development on TI Resource Explorer

MMWAVE-SENSING-ESTIMATOR-CLOUD – mmWave sensing estimator cloud development on TI Resource Explorer

UNIFLASH – UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

MMWAVE-INDUSTRIAL-TOOLBOX-CLOUD – mmWave industrial toolbox cloud development with software examples and demos on TI Resource Explorer

Get started with running application demos on IWR16843AOP

Develop your application on IWR6843AOP

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

MMWAVEICBOOST – mmWave sensors carrier card platform

MMWAVEPOEEVM – mmWave sensor power-over-ethernet (PoE) evaluation module

CCSTUDIO – Code Composer Studio integrated development environment (IDE)

MMWAVE-SDK – mmWave software development kit (SDK)

UNIFLASH – UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

MMWAVE-DEMO-VISUALIZER-CLOUD – mmWave demo visualizer cloud development on TI Resource Explorer

MMWAVE-INDUSTRIAL-TOOLBOX-CLOUD – mmWave industrial toolbox cloud development with software examples and demos on TI Resource Explorer

DCA1000EVM – Real-time data-capture adapter for radar sensing evaluation module

MMWAVE-STUDIO – mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

MMWAVE-SECDEV – mmWave software secure development

Develop your application on IWR6843AOP

Order this hardware only

IWR6843AOPEVM – IWR6843AOP evaluation module for integrated antenna-on-package (AoP) intelligent mmWave sensor

Design files

Technical documentation

Related design resources

Hardware development

EVALUATION BOARD

Software development

SOFTWARE DEVELOPMENT KIT (SDK)

IDE, CONFIGURATION, COMPILER OR DEBUGGER

SOFTWARE PROGRAMMING TOOL

Support & training

TI E2E™ forums with technical support from TI engineers

Training series

Videos

Download options

UNIFLASH UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UNIFLASH INSTALLERS

Download options

MMWAVE-STUDIO mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

MMWAVE STUDIO INSTALLER

MD5 CHECKSUM

Download options

MMWAVE-SDK mmWave software development kit (SDK)

MMWAVE SDK INSTALLERS

EXPLORE IN THE CLOUD

MD5 CHECKSUM

Download options

CCSTUDIO Code Composer Studio integrated development environment (IDE)

SINGLE FILE INSTALLERS

ON-DEMAND INSTALLERS

EXPLORE IN THE CLOUD

UNIFLASH
UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

MMWAVE-STUDIO
mmWave studio GUI tools for 1st-generation parts (xWR1243, xWR1443, xWR1642, xWR1843, xWR6843, xWR6443)

MMWAVE-SDK
mmWave software development kit (SDK)

CCSTUDIO
Code Composer Studio integrated development environment (IDE)