IWR6243
- FMCW transceiver
- Integrated PLL, transmitter, receiver, baseband, and ADC
- 57- to 64-GHz coverage with 7 GHz available bandwidth
- Four receive channels
- Three transmit channels
- Supports 6-bit phase shifter for TX Beam forming
- Ultra-accurate chirp engine based on Fractional-N PLL
- TX power: 12 dBm
- RX noise figure: 10 dB
- Phase noise at 1 MHz:
- –93dBc/Hz
- Built-in calibration and self-test
- Self-calibrating system across process and temperature
- Host interface
- Control interface with external processor over SPI or I2C interface
- Data interface with external processor over MIPI D-PHY, CSI2 v1.1 and LVDS (only for debug)
- Interrupts for Fault Reporting
- Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid IEC 61508 functional safety system design up to SIL 3
- Hardware integrity up to SIL-2
- Safety-related certification
- IEC 61508 certified SIL-2 by TUV SUD
- IWR6243 Advanced features
- Embedded self-monitoring with limited Host processor involvement
- Complex baseband architecture
- Option of cascading multiple devices to increase channel count
- Embedded interference detection capability
- Power management
- Built-in LDO Network for enhanced PSRR
- I/Os support dual voltage 3.3 V/1.8 V
- Clock source
- Supports externally driven clock (square/sine) at 40 MHz
- Supports 40 MHz crystal connection with load capacitors
- Easy hardware design
- 0.65-mm pitch, 161-pin 10.4 mm × 10.4 mm flip chip BGA package for easy assembly and low-cost PCB design
- Small solution size
- Operating Condtions :
- Junction temp range: –40°C to 105°C
The IWR6243 is an integrated single-chip FMCW transceiver capable of operation in the 57- to 64-GHz band. This device enables unprecedented levels of integration in an extremely small form factor. IWR6243 is an ideal solution for low power, self-monitored, ultra-accurate radar systems in the industrial space.
IWR6243 is a self-contained FMCW transceiver single-chip solution that simplifies the implementation of Radar sensors. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLL and ADC converters. Simple programming model changes can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamic reconfiguration for implementing a multimode sensor.
Additionally, the device is provided as a complete platform solution including reference hardware design, software drivers, sample configurations, API guide, and user documentation.
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | IWR6243 Single-Chip 57- to 64-GHz FMCW Transceiver datasheet (Rev. A) | PDF | HTML | 09 Nov 2022 |
* | Errata | IWR6243 Device Errata Silicon Revision 1.0 | 21 Feb 2023 | |
Functional safety information | IWRxx43 TUV SUD Functional Safety Certificate (Rev. B) | 23 Jan 2024 | ||
Application note | mmWave Radar Radome Design Guide | PDF | HTML | 17 Aug 2021 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
HS-3P-77-3D-WGA-LOP-4X4 — Antenna design for ADAS radar sensors from HUBER+SUHNER
77GHz 3D waveguide antenna 4Tx4R - RF substrate independent solution family
HUBER+SUHNER has developed and manufactures a second-generation 3D metallized plastic waveguide antenna designed for RF substrate-independent solutions. This cutting-edge technology, enabled by proprietary interfaces, (...)
MMWAVE-DFP-2G-60GHZ-FW — mmWave device firmware package (DFP) for second generation xWR6243 parts.
Supported products & hardware
Products
Industrial mmWave radar sensors
Hardware development
Evaluation board
Software
Firmware
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
Supported products & hardware
This design resource supports most products in these categories.
Check the product details page to verify support.
-
parametric-filter Digital signal processors (DSPs) -
parametric-filter Arm-based processors -
parametric-filter MSP430 microcontrollers -
parametric-filter C2000 real-time microcontrollers -
parametric-filter Arm-based microcontrollers -
parametric-filter Signal conditioners -
parametric-filter mmWave radar sensors -
parametric-filter Wi-Fi products -
parametric-filter Sub-1 GHz products -
parametric-filter Digital power isolated controllers
RADAR-ACADEMY — mmWave Radar Academy
Supported products & hardware
Products
Automotive mmWave radar sensors
Industrial mmWave radar sensors
Hardware development
Evaluation board
Software
Design tool
Firmware
Software development kit (SDK)
IDE, configuration, compiler or debugger
RADAR-TOOLBOX — Radar evaluation and development support package with example projects, documentation and tools
Supported products & hardware
Products
Industrial mmWave radar sensors
Automotive mmWave radar sensors
Hardware development
Evaluation board
Software
Software development kit (SDK)
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
FCCSP (ABL) | 161 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.