Reference design
PMP11600
— High Efficiency Universal AC Input to 5V 2A Adapter Reference Design
The PMP11600 is a reference design for 5V 2A adapter applications. The solution implements a high efficiency primary side controller UCC28704, it is fully tested and passes conduction EMI. This design uses Volt-Second balance control synchronous rectifier UCC24636 for high efficiency. The board (...)
Supported products & hardware
Reference design
PMP40182
— Bi-Directional Battery Initialization System Power Board Reference Design
This reference design is a battery initialization reference design solution for automotive and battery applications. The module enables a high efficiency single stage conversion for charging and discharging the battery. This design features a 0.1% accurate current control loop using the high (...)
Supported products & hardware
Reference design
PMP40274
— 24Vin, 5V6A Power Module Reference Design
PMP40274 is a power module reference design solution for power train applications. The module enables a high efficiency with flyback-CCM synchronous rectifier. The efficiency is >88% at full load. This design features <0.2W standby power. Integrated input UVLO, OVP and output OVP, OCP (...)
Supported products & hardware
Reference design
PMP4468
— 18-V to 36-Vdc input, 5-V/30-W active clamp forward reference design
The PMP4468 is an isolated DC-DC module reference design targeted for industrial and telecom applications. The DC input range is from 18 V to 36 V, with a 24-V typical input and a 5-V, 6-A output. The LM5025A active clamp forward controller is used in the design. The efficiency is up to 90% with (...)
Supported products & hardware
Reference design
PMP8790
— Active Clamp Forward Quarter Brick (18 to 60Vdc Input 3.3V/12A) Reference Design
This reference design generates a 3.3V/12A output from a wide 18V-60V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17501Q5A and CSD18502Q5B, implemented as self-driven synchronous rectifiers, provide for an (...)
Supported products & hardware
Reference design
PMP8973
— 18Vdc-60Vdc Input, 3.3V/15A Active Clamp Forward, 1/8 Brick Reference Design
The PMP8973 reference design generates a 3.3V/15A output from an 18V to 60V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD16415Q5 and CSD18502Q5B, implemented as synchronous rectifiers, provides for a highly efficient (...)
Supported products & hardware
Reference design
PMP9126
— 36 to 75VDC Input 5V/15A Active Clamp Forward 1/8 Brick Form Factor Reference Design
This reference design generates a 5V/15A output from a 36V to 75V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17501Q5A and CSD18502Q5B, implemented as a synchronous rectifiers, provides for a highly efficient (...)
Supported products & hardware
Reference design
TIDA-00120
— Solar MPPT Charge Controller Reference Design
This design is a 20A Maximum Power Point Tracking (MPPT) solar charge controller created for solar panel inputs corresponding to 12V and 24V panels. The design is targeted for small and medium power solar charger solutions and is capable of operating with 12V/24V panels and 12V/24V batteries up to (...)
Supported products & hardware
Reference design
TIDA-00772
— 18-V/400-W 98% Efficient Compact Brushless DC Motor Drive w/Stall Current Limit Reference Design
The TIDA-00772 is a 18 A RMS drive for a three phase brushless DC (BLDC) motor in power tools operating from a 5-cell Li-ion battery with a voltage up to 21 V. This design is a 45 x 50 mm compact drive implementing sensor-based trapezoidal control. The design uses a discrete, compact MOSFET-based (...)
Supported products & hardware